?? target.c
字號:
/****************************************Copyright (c)**************************************************
** Guangzou ZLG-MCU Development Co.,LTD.
** graduate school
** http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name: target.c
** Last modified Date: 2004-09-17
** Last Version: 1.0
** Descriptions: header file of the specific codes for LPC2100 target boards
** Every project should include a copy of this file, user may modify it as needed
**------------------------------------------------------------------------------------------------------
** Created by: Chenmingji
** Created date: 2004-02-02
** Version: 1.0
** Descriptions: The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by: Chenmingji
** Modified date: 2004-09-17
** Version: 1.01
** Descriptions: Renewed the template, added more compiler supports
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
#define IN_TARGET
#include "config.h"
/*********************************************************************************************************
** Function name: IRQ_Exception
**
** Descriptions: interrupt exceptional handler , change it as needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void IRQ_Exception(void)
{
while(1); // change it to your code 這一句替換為自己的代碼
}
/*********************************************************************************************************
** Function name: FIQ_Exception
**
** Descriptions: Fast interrupt exceptional handler , change it as needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void FIQ_Exception(void)
{
while(1); // change it to your code 這一句替換為自己的代碼
}
/*********************************************************************************************************
** Function name: Timer0_Exception
**
** Descriptions: Timer0 interrupt service function
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void Timer0_Exception(void)
{
T0IR = 0x01;
VICVectAddr = 0; //interrupt close 通知中斷控制器中斷結束
OSTimeTick();
}
/*********************************************************************************************************
** Function name: Timer0Init
**
** Descriptions: Initialize the Time0
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void Timer0Init(void)
{
T0IR = 0xffffffff;
T0TC = 0;
T0TCR = 0x01;
T0MCR = 0x03;
T0MR0 = (Fpclk / OS_TICKS_PER_SEC);
}
/*********************************************************************************************************
** Function name: VICInit
**
** Descriptions: Initialize the Interrupt Vevtor Controller
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void VICInit(void)
{
extern void IRQ_Handler(void);
extern void Timer0_Handler(void);
extern void Uart0_Handler(void);
VICIntEnClr = 0xffffffff;
VICDefVectAddr = (uint32)IRQ_Handler;
VICVectAddr0 = (uint32)Timer0_Handler;
VICVectAddr1 = (uint32)Uart0_Handler;
VICVectCntl0 = (0x20 | 0x04); /*IRQ slot Num 0x4 and Enable the IRQ slot*/
VICVectCntl1 = (0x20 | 0x06); /*IRQ slot Num 0x6 and Enable the IRQ slot*/
VICIntEnable = (1 <<UART0_INT)|(1<<TIMER0_INT); /*Enable The Timer0and Uart0 interrupt*/
}
/*位 7 6 5 4 3 2 1 0
符號 UART1 UART0 TIMER1 TIMER0 ARMCore1 ARMCore0 - WDT*/
/*********************************************************************************************************
** Function name: TargetInit
**
** Descriptions: Initialize the target board; it is called in a necessary place, change it as
** needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetInit(void)
{
OS_ENTER_CRITICAL();
srand((uint32) TargetInit);
VICInit();
Timer0Init();
OS_EXIT_CRITICAL();
}
/*********************************************************************************************************
** Function name: InitialiseUART0
**
** Descriptions: Initialize the Uart0
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void InitialiseUART0(uint32 bps)
{
uint16 Fdiv;
PINSEL0 = (PINSEL0 & 0xfffffff0) | 0x05; /* Select the pins for Uart 選擇管腳為UART0 */
U0LCR = 0x80; /* Enable to access the frequenc regecter 允許訪問分頻因子寄存器 */
Fdiv = (Fpclk / 16) / bps; /* Set the baudrate設置波特率 */
U0DLM = Fdiv / 256;
U0DLL = Fdiv % 256;
U0LCR = 0x03; /* Disable to access the frequenc regecter 禁止訪問分頻因子寄存器 */
/* set to 8,1,n 且設置為8,1,n */
U0IER = 0x00; /* Disable interrupt禁止中斷 */
U0FCR = 0x00; /* initial FIFO 初始化FIFO */
#if UART_INTERRUPT_FLAG
U0IER = IER_RBR; /* 使能中斷 */
#endif
}
/*********************************************************************************************************
** Function name: TargetResetInit
**
** Descriptions: Initialize the target
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetResetInit(void)
{
#ifdef __DEBUG_RAM
MEMMAP = 0x2; //remap
#endif
#ifdef __DEBUG_FLASH
MEMMAP = 0x1; //remap
#endif
#ifdef __IN_CHIP
MEMMAP = 0x1; //remap
#endif
PINSEL0 = (PINSEL0 & 0xFFFF0000) | 0x05 | 0x50;
/* 設置系統各部分時鐘 */
/* Set system timers for each component */
PLLCON = 1;
#if (Fpclk / (Fcclk / 4)) == 1
VPBDIV = 0;
#endif
#if (Fpclk / (Fcclk / 4)) == 2
VPBDIV = 2;
#endif
#if (Fpclk / (Fcclk / 4)) == 4
VPBDIV = 1;
#endif
#if (Fcco / Fcclk) == 2
PLLCFG = ((Fcclk / Fosc) - 1) | (0 << 5);
#endif
#if (Fcco / Fcclk) == 4
PLLCFG = ((Fcclk / Fosc) - 1) | (1 << 5);
#endif
#if (Fcco / Fcclk) == 8
PLLCFG = ((Fcclk / Fosc) - 1) | (2 << 5);
#endif
#if (Fcco / Fcclk) == 16
PLLCFG = ((Fcclk / Fosc) - 1) | (3 << 5);
#endif
PLLFEED = 0xaa;
PLLFEED = 0x55;
while((PLLSTAT & (1 << 10)) == 0);
PLLCON = 3;
PLLFEED = 0xaa;
PLLFEED = 0x55;
/* 設置存儲器加速模塊 */
/* Set memory accelerater module*/
MAMCR = 0;
#if Fcclk < 20000000
MAMTIM = 1;
#else
#if Fcclk < 40000000
MAMTIM = 2;
#else
MAMTIM = 3;
#endif
#endif
MAMCR = 2;
/* 設置串行口 */
/* initialize UART*/
InitialiseUART0(57600);
/* initialize VIC*/
VICIntEnClr = 0xffffffff;
VICVectAddr = 0;
VICIntSelect = 0;
T0IR = 0xffffffff;
T0TCR = 0X02;
}
/*********************************************************************************************************
** 以下為一些與系統相關的庫函數的實現
** 具體作用請ads的參考編譯器與庫函數手冊
** 用戶可以根據自己的要求修改
********************************************************************************************************/
/*********************************************************************************************************
** The implementations for some library functions
** For more details, please refer to the ADS compiler handbook and The library
** function manual
** User could change it as needed
********************************************************************************************************/
/*
這段程序，，去除掉。。。
by mcu123
在startup.s 中添加了
*/
/*
#include "rt_sys.h"
#include "stdio.h"
#pragma import(__use_no_semihosting_swi)
int __rt_div0(int a)
{
a = a;
return 0;
}
int fputc(int ch,FILE *f)
{
ch = ch;
f = f;
return 0;
}
int fgetc(FILE *f)
{
f = f;
return 0;
}
int _sys_close(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_write(FILEHANDLE fh, const unsigned char * buf,
unsigned len, int mode)
{
fh = fh;
buf = buf;
len =len;
mode = mode;
return 0;
}
int _sys_read(FILEHANDLE fh, unsigned char * buf,
unsigned len, int mode)
{
fh = fh;
buf = buf;
len =len;
mode = mode;
return 0;
}
void _ttywrch(int ch)
{
ch = ch;
}
int _sys_istty(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_seek(FILEHANDLE fh, long pos)
{
fh = fh;
return 0;
}
int _sys_ensure(FILEHANDLE fh)
{
fh = fh;
return 0;
}
long _sys_flen(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_tmpnam(char * name, int sig, unsigned maxlen)
{
name = name;
sig = sig;
maxlen = maxlen;
return 0;
}
void _sys_exit(int returncode)
{
returncode = returncode;
}
char *_sys_command_string(char * cmd, int len)
{
cmd = cmd;
len = len;
return 0;
}
*/
/*********************************************************************************************************
** End Of File
********************************************************************************************************/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -