?? mcp2515.h
字號:
#ifndef MCP2515_H_
#define MCP2515_H_
#include "spi.h"
#include "2410addr.h"
#include "can.h"
#define MCP2515_OK (0)
#define MCP2515_FAIL (1)
#define MCP_ALLTXBUSY (2)
#define MCP_N_TXBUFFERS 3
#define MCP_RXBUF_0 (MCP_RXB0SIDH)
#define MCP_RXBUF_1 (MCP_RXB1SIDH)
// Begin mt
#define MCP_SIDH 0
#define MCP_SIDL 1
#define MCP_EID8 2
#define MCP_EID0 3
#define MCP_TXB_EXIDE_M 0x08 /* In TXBnSIDL */
#define MCP_DLC_MASK 0x0F /* 4 LSBits */
#define MCP_RTR_MASK 0x40 /* (1<<6) Bit 6 */
#define MCP_RXB_RX_ANY 0x60
#define MCP_RXB_RX_EXT 0x40
#define MCP_RXB_RX_STD 0x20
#define MCP_RXB_RX_STDEXT 0x00
#define MCP_RXB_RX_MASK 0x60
#define MCP_RXB_BUKT_MASK 0x04
/*
** Bits in the TXBnCTRL registers.
*/
#define MCP_TXB_TXBUFE_M 0x80
#define MCP_TXB_ABTF_M 0x40
#define MCP_TXB_MLOA_M 0x20
#define MCP_TXB_TXERR_M 0x10
#define MCP_TXB_TXREQ_M 0x08
#define MCP_TXB_TXIE_M 0x04
#define MCP_TXB_TXP10_M 0x03
#define MCP_TXB_RTR_M 0x40 // In TXBnDLC
#define MCP_RXB_IDE_M 0x08 // In RXBnSIDL
#define MCP_RXB_RTR_M 0x40 // In RXBnDLC
#define MCP_STAT_RXIF_MASK (0x03)
#define MCP_STAT_RX0IF (1<<0)
#define MCP_STAT_RX1IF (1<<1)
#define MCP_EFLG_RX1OVR (1<<7)
#define MCP_EFLG_RX0OVR (1<<6)
#define MCP_EFLG_TXBO (1<<5)
#define MCP_EFLG_TXEP (1<<4)
#define MCP_EFLG_RXEP (1<<3)
#define MCP_EFLG_TXWAR (1<<2)
#define MCP_EFLG_RXWAR (1<<1)
#define MCP_EFLG_EWARN (1<<0)
#define MCP_EFLG_ERRORMASK (0xF8) /* 5 MS-Bits */
// End mt
// Define MCP2515 register addresses
#define MCP_RXF0SIDH 0x00
#define MCP_RXF0SIDL 0x01
#define MCP_RXF0EID8 0x02
#define MCP_RXF0EID0 0x03
#define MCP_RXF1SIDH 0x04
#define MCP_RXF1SIDL 0x05
#define MCP_RXF1EID8 0x06
#define MCP_RXF1EID0 0x07
#define MCP_RXF2SIDH 0x08
#define MCP_RXF2SIDL 0x09
#define MCP_RXF2EID8 0x0A
#define MCP_RXF2EID0 0x0B
#define MCP_CANSTAT 0x0E
#define MCP_CANCTRL 0x0F
#define MCP_RXF3SIDH 0x10
#define MCP_RXF3SIDL 0x11
#define MCP_RXF3EID8 0x12
#define MCP_RXF3EID0 0x13
#define MCP_RXF4SIDH 0x14
#define MCP_RXF4SIDL 0x15
#define MCP_RXF4EID8 0x16
#define MCP_RXF4EID0 0x17
#define MCP_RXF5SIDH 0x18
#define MCP_RXF5SIDL 0x19
#define MCP_RXF5EID8 0x1A
#define MCP_RXF5EID0 0x1B
#define MCP_TEC 0x1C
#define MCP_REC 0x1D
#define MCP_RXM0SIDH 0x20
#define MCP_RXM0SIDL 0x21
#define MCP_RXM0EID8 0x22
#define MCP_RXM0EID0 0x23
#define MCP_RXM1SIDH 0x24
#define MCP_RXM1SIDL 0x25
#define MCP_RXM1EID8 0x26
#define MCP_RXM1EID0 0x27
#define MCP_CNF3 0x28
#define MCP_CNF2 0x29
#define MCP_CNF1 0x2A
#define MCP_CANINTE 0x2B
#define MCP_CANINTF 0x2C
#define MCP_EFLG 0x2D
#define MCP_TXB0CTRL 0x30
#define MCP_TXB1CTRL 0x40
#define MCP_TXB2CTRL 0x50
#define MCP_RXB0CTRL 0x60
#define MCP_RXB0SIDH 0x61
#define MCP_RXB1CTRL 0x70
#define MCP_RXB1SIDH 0x71
#define MCP_TX_INT 0x1C // Enable all transmit interrupts
#define MCP_TX01_INT 0x0C // Enable TXB0 and TXB1 interrupts
#define MCP_RX_INT 0x03 // Enable receive interrupts
#define MCP_NO_INT 0x00 // Disable all interrupts
#define MCP_TX01_MASK 0x14
#define MCP_TX_MASK 0x54
// Define SPI Instruction Set
#define MCP_WRITE 0x02
#define MCP_READ 0x03
#define MCP_BITMOD 0x05
#define MCP_LOAD_TX0 0x40
#define MCP_LOAD_TX1 0x42
#define MCP_LOAD_TX2 0x44
#define MCP_RTS_TX0 0x81
#define MCP_RTS_TX1 0x82
#define MCP_RTS_TX2 0x84
#define MCP_RTS_ALL 0x87
#define MCP_READ_RX0 0x90
#define MCP_READ_RX1 0x94
#define MCP_READ_STATUS 0xA0
#define MCP_RX_STATUS 0xB0
#define MCP_RESET 0xC0
// CANCTRL Register Values
#define MODE_NORMAL 0x00
#define MODE_SLEEP 0x20
#define MODE_LOOPBACK 0x40
#define MODE_LISTENONLY 0x60
#define MODE_CONFIG 0x80
#define MODE_POWERUP 0xE0
#define MODE_MASK 0xE0
#define ABORT_TX 0x10
#define MODE_ONESHOT 0x08
#define CLKOUT_ENABLE 0x04
#define CLKOUT_DISABLE 0x00
#define CLKOUT_PS1 0x00
#define CLKOUT_PS2 0x01
#define CLKOUT_PS4 0x02
#define CLKOUT_PS8 0x03
// CNF1 Register Values
#define SJW1 0x00
#define SJW2 0x40
#define SJW3 0x80
#define SJW4 0xC0
// CNF2 Register Values
#define BTLMODE 0x80
#define SAMPLE_1X 0x00
#define SAMPLE_3X 0x40
// CNF3 Register Values
#define SOF_ENABLE 0x80
#define SOF_DISABLE 0x00
#define WAKFIL_ENABLE 0x40
#define WAKFIL_DISABLE 0x00
// CANINTF Register Bits
#define MCP_RX0IF 0x01
#define MCP_RX1IF 0x02
#define MCP_TX0IF 0x04
#define MCP_TX1IF 0x08
#define MCP_TX2IF 0x10
#define MCP_ERRIF 0x20
#define MCP_WAKIF 0x40
#define MCP_MERRF 0x80
#define MCP2515_SELECT() (rGPGDAT &=~(0x04))
#define MCP2515_UNSELECT() (rGPGDAT |=(0x04))
/*-----------------------*/
/* global settings */
/*-----------------------*/
/* CFG3 */
// Start of Frame SOF (CLKOUT)
// either SOF_ENABLE or SOF_DISABLE
#define MCP_GENERAL_SOF (SOF_DISABLE)
// Wake up Filter (WAKFIL)
// either WAKFIL_ENABLE or WAKFIL_DISABLE
#define MCP_GENERAL_WAKFIL (WAKFIL_DISABLE)
/*-----------------------*/
/* 125 kBPS @ 4MHZ F_OSC */
/*-----------------------*/
/* CNF1 */
// SJW as defined in mcp_defs.h
// here: SJW = 1*TQ
#define MCP_4MHz_125kBPS_SJW (SJW1)
// Prescaler = (BRP+1)*2
// here Prescaler = 4 -> BRP=1
#define MCP_4MHz_125kBPS_BRP (1)
/* CNF2 */
// BLT-Mode defined in CNF3 (0 or BTLMODE from mcp_defs.h)
#define MCP_4MHz_125kBPS_BLTMODE (BTLMODE)
// 3 samples (SAMPLE_3X) or 1 sample (SAMPLE_1X)
#define MCP_4MHz_125kBPS_SAM (SAMPLE_1X)
// (Phase Segment 1) PHSEG1 = PS1 - 1
// here: PS1 calculated as 2
#define MCP_4MHz_125kBPS_PHSEG1 ((2-1)<<3)
// (Propagation Delay) PRSEG = PRSEQTQ-1
// here PRSEQTQ = 2
#define MCP_4MHz_125kBPS_PRSEG (2-1)
/* CNF3 */
// (Phase Segment 2) PHSEG2 = PS2 - 1
// here: PS2 calculated as 3
#define MCP_4MHz_125kBPS_PHSEG (3-1)
#define MCP_4MHz_125kBPS_CFG1 (MCP_4MHz_125kBPS_SJW | MCP_4MHz_125kBPS_BRP)
#define MCP_4MHz_125kBPS_CFG2 (MCP_4MHz_125kBPS_BLTMODE | MCP_4MHz_125kBPS_SAM | \
MCP_4MHz_125kBPS_PHSEG1 | MCP_4MHz_125kBPS_PRSEG)
#define MCP_4MHz_125kBPS_CFG3 (MCP_GENERAL_SOF | MCP_GENERAL_WAKFIL | \
MCP_4MHz_125kBPS_PHSEG)
/*-----------------------*/
/* 20 kBPS @ 4MHZ F_OSC */
/*-----------------------*/
/* CNF1 */
// SJW as defined in mcp_defs.h
// here: SJW = 1*TQ
#define MCP_4MHz_20kBPS_SJW (SJW1)
// Prescaler = (BRP+1)*2
// here Prescaler = 10 -> BRP=4 (20TQ)
#define MCP_4MHz_20kBPS_BRP (4)
/* CNF2 */
// BLT-Mode defined in CNF3 (0 or BTLMODE from mcp_defs.h)
#define MCP_4MHz_20kBPS_BLTMODE (BTLMODE)
// 3 samples (SAMPLE_1X) or 1 sample (SAMPLE_1X)
#define MCP_4MHz_20kBPS_SAM (SAMPLE_1X)
// (Phase Segment 1) PHSEG1 = PS1 - 1
// here: PS1 calculated as 8
#define MCP_4MHz_20kBPS_PHSEG1 ((8-1)<<3)
// (Propagation Delay) PRSEG = PRSEQTQ-1
// here PRSEQTQ = 3
#define MCP_4MHz_20kBPS_PRSEG (3-1)
/* CNF3 */
// (Phase Segment 2) PHSEG2 = PS2 - 1
// here: PS2 calculated as 8
#define MCP_4MHz_20kBPS_PHSEG (8-1)
#define MCP_4MHz_20kBPS_CFG1 (MCP_4MHz_20kBPS_SJW | MCP_4MHz_20kBPS_BRP)
#define MCP_4MHz_20kBPS_CFG2 (MCP_4MHz_20kBPS_BLTMODE | MCP_4MHz_20kBPS_SAM | \
MCP_4MHz_20kBPS_PHSEG1 | MCP_4MHz_20kBPS_PRSEG)
#define MCP_4MHz_20kBPS_CFG3 (MCP_GENERAL_SOF | MCP_GENERAL_WAKFIL | \
MCP_4MHz_20kBPS_PHSEG)
void mcp2515_reset(void);
unsigned char mcp2515_readRegister(const unsigned char address);
void mcp2515_setRegister(const unsigned char address,
const unsigned char value);
void mcp2515_modifyRegister(const unsigned char address, const unsigned char mask,
const unsigned char data);
unsigned char mcp2515_readStatus(void);
unsigned char mcp2515_RXStatus(void);
unsigned char mcp2515_setCANCTRL_Mode(const unsigned char newmode);
unsigned char mcp2515_configRate(const unsigned char canSpeed);
unsigned char mcp2515_Init(const unsigned char canSpeed);
void mcp2515_write_can_id( const unsigned char mcp_addr,
const unsigned char ext, const unsigned int can_id );
void mcp2515_setRegisterS(unsigned char address,char values[],unsigned char n);
void mcp2515_start_transmit(const unsigned char mcp_addr);
void mcp2515_read_canMsg(unsigned char buffer_sidh_addr,CanMessage * msg);
void mcp2515_read_can_id(unsigned char mcp_addr,unsigned char * ext,unsigned int * can_id );
void mcp2515_readRegisterS(unsigned char address,char values[], unsigned char n);
#endif
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -