/**@verbatimCopyright (C) 2004,2005  ADDI-DATA GmbH for the source code of this module.                 ADDI-DATA GmbH         Dieselstrasse 3         D-77833 Ottersweier         Tel: +19(0)7223/9493-0         Fax: +49(0)7223/9493-92         http://www.addi-data-com         info@addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USAYou shoud also find the complete GPL in the COPYING file accompanying this source code.@endverbatim*/// Card Specific information#define APCI3200_BOARD_VENDOR_ID                 0x15B8//#define APCI3200_ADDRESS_RANGE                   264int MODULE_NO ; struct {			 	 INT i_Gain ; INT i_Polarity; INT i_OffsetRange; INT i_Coupling; INT i_SingleDiff; INT i_AutoCalibration; UINT ui_ReloadValue; UINT ui_TimeUnitReloadVal; INT i_Interrupt; INT i_ModuleSelection;}Config_Parameters_Module1,Config_Parameters_Module2,Config_Parameters_Module3,Config_Parameters_Module4;//ANALOG INPUT RANGE comedi_lrange range_apci3200_ai={ 8, {		BIP_RANGE(10),		BIP_RANGE(5),		BIP_RANGE(2),		BIP_RANGE(1),		UNI_RANGE(10),		UNI_RANGE(5),		UNI_RANGE(2),		UNI_RANGE(1)	}};comedi_lrange range_apci3300_ai={ 4, {		UNI_RANGE(10),		UNI_RANGE(5),		UNI_RANGE(2),		UNI_RANGE(1)	}};//Analog Input related Defines#define APCI3200_AI_OFFSET_GAIN                  0#define APCI3200_AI_SC_TEST                      4#define APCI3200_AI_IRQ                          8#define APCI3200_AI_AUTOCAL                      12#define APCI3200_RELOAD_CONV_TIME_VAL            32#define APCI3200_CONV_TIME_TIME_BASE             36#define APCI3200_RELOAD_DELAY_TIME_VAL           40#define APCI3200_DELAY_TIME_TIME_BASE            44#define APCI3200_AI_MODULE1                      0#define APCI3200_AI_MODULE2                      64#define APCI3200_AI_MODULE3                      128#define APCI3200_AI_MODULE4                      192#define TRUE                                     1#define FALSE                                    0#define APCI3200_AI_EOSIRQ                       16#define APCI3200_AI_EOS                          20#define APCI3200_AI_CHAN_ID                      24#define APCI3200_AI_CHAN_VAL                     28#define ANALOG_INPUT                             0#define TEMPERATURE                              1#define RESISTANCE                               2#define ENABLE_EXT_TRIG                          1#define ENABLE_EXT_GATE                          2#define ENABLE_EXT_TRIG_GATE                     3#define APCI3200_MAXVOLT                         2.5#define ADDIDATA_GREATER_THAN_TEST               0#define ADDIDATA_LESS_THAN_TEST                  1#define ADDIDATA_UNIPOLAR                        1#define ADDIDATA_BIPOLAR                         2//ADDIDATA Enable Disable#define ADDIDATA_ENABLE                            1#define ADDIDATA_DISABLE                           0//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values#define MAX_MODULE				4//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM valuestypedef struct   {   ULONG ul_NumberOfValue;   ULONG *pul_ResistanceValue;   ULONG *pul_TemperatureValue;   }str_ADDIDATA_RTDStruct,*pstr_ADDIDATA_RTDStruct;//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM valuestypedef struct   {   // Begin JK 05/08/2003 change for Linux       unsigned long ul_CurrentSourceCJC;   unsigned long ul_CurrentSource [5];   // End JK 05/08/2003 change for Linux   // Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1   unsigned long  ul_GainFactor [8]; // Gain Factor    unsigned int w_GainValue [10];   // End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1   }str_Module;//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values   //BEGIN JK 06.07.04: Management of sevrals boardstypedef struct    {   INT i_CJCAvailable;    INT i_CJCPolarity;   INT i_CJCGain;   INT i_InterruptFlag;   INT i_ADDIDATAPolarity;   INT i_ADDIDATAGain;                     INT i_AutoCalibration;   INT i_ADDIDATAConversionTime;   INT i_ADDIDATAConversionTimeUnit;    INT i_ADDIDATAType;   INT i_ChannelNo;   INT i_ChannelCount;   INT i_ScanType;   INT i_FirstChannel;   INT i_LastChannel;   INT i_Sum;   INT i_Offset;   UINT ui_Channel_num;   INT i_Count;   INT i_Initialised;   //UINT ui_InterruptChannelValue[96]; //Buffer   UINT ui_InterruptChannelValue[144]; //Buffer   BYTE b_StructInitialized;   //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68   lsampl_t ui_ScanValueArray [7+12]; // 7 is the maximal number of channels   //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68      //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values      INT i_ConnectionType;   INT     i_NbrOfModule;   str_Module s_Module [MAX_MODULE];   //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values   } str_BoardInfos;//END JK 06.07.04: Management of sevrals boards// Hardware Layer  functions for Apci3200//AIINT i_APCI3200_ConfigAnalogInput(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data);INT i_APCI3200_ReadAnalogInput(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data);INT i_APCI3200_InsnWriteReleaseAnalogInput(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data);INT i_APCI3200_InsnBits_AnalogInput_Test(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data); INT i_APCI3200_StopCyclicAcquisition(comedi_device *dev,comedi_subdevice *s);INT i_APCI3200_InterruptHandleEos(comedi_device *dev);INT i_APCI3200_CommandTestAnalogInput(comedi_device *dev,comedi_subdevice *s,comedi_cmd *cmd) ;INT i_APCI3200_CommandAnalogInput(comedi_device *dev,comedi_subdevice *s);INT i_APCI3200_ReadDigitalInput(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data);//Interruptvoid v_APCI3200_Interrupt(int irq, void *d, struct pt_regs *regs) ;int i_APCI3200_InterruptHandleEos(comedi_device *dev);//Reset functionsINT i_APCI3200_Reset(comedi_device *dev);	int i_APCI3200_ReadCJCCalOffset(comedi_device *dev,lsampl_t *data);int i_APCI3200_ReadCJCValue(comedi_device *dev,lsampl_t *data);int i_APCI3200_ReadCalibrationGainValue(comedi_device *dev,UINT *data);int i_APCI3200_ReadCalibrationOffsetValue(comedi_device *dev,UINT *data);int i_APCI3200_Read1AnalogInputChannel(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data);int i_APCI3200_ReadCJCCalGain(comedi_device *dev,lsampl_t *data);