?? target.c
字號:
/****************************************Copyright (c)**************************************************
** Guangzou ZLG-MCU Development Co.,LTD.
** graduate school
** http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name: target.c
** Last modified Date: 2004-09-17
** Last Version: 1.0
** Descriptions: header file of the specific codes for LPC2100 target boards
** Every project should include a copy of this file, user may modify it as needed
**------------------------------------------------------------------------------------------------------
** Created by: Chenmingji
** Created date: 2004-02-02
** Version: 1.0
** Descriptions: The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by: Chenmingji
** Modified date: 2004-09-17
** Version: 1.01
** Descriptions: Renewed the template, added more compiler supports
**
**------------------------------------------------------------------------------------------------------
** Modified by: daimaobo
** Modified date: 2006-12-20
** Version: 2.00
** Descriptions: Modified for LPC23XX
**
********************************************************************************************************/
#define IN_TARGET
#include "config.h"
/*********************************************************************************************************
** Function name: IRQ_Exception
**
** Descriptions: interrupt exceptional handler , change it as needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void __irq IRQ_Exception(void)
{
while(1); // change it to your code 這一句替換為自己的代碼
}
/*********************************************************************************************************
** Function name: FIQ_Exception
**
** Descriptions: Fast interrupt exceptional handler , change it as needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void FIQ_Exception(void)
{
while(1); // change it to your code 這一句替換為自己的代碼
}
/*********************************************************************************************************
** Function name: TargetInit
**
** Descriptions: Initialize the target board; it is called in a necessary place, change it as
** needed
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetInit(void)
{
/* 添加自己的代碼 */
/* Add your codes here */
}
/*********************************************************************************************************
** Function name: TargetResetInit
**
** Descriptions: Initialize the target board before running the main() function; User may
** change it as needed, but may not deleted it.
**
** input parameters: None
** Returned value: None
**
** Used global variables: None
** Calling modules: None
**
** Created by: Chenmingji
** Created Date: 2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by: daimaobo
** Modified date: 2006/12/20
** Descriptions: Modified for LPC23XX
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
void TargetResetInit(void)
{
#ifdef __DEBUG_RAM
MEMMAP = 0x2; // remap
#endif
#ifdef __DEBUG_FLASH
MEMMAP = 0x1; // remap
#endif
#ifdef __IN_CHIP
MEMMAP = 0x1; // remap
#endif
if ( PLLSTAT & (1 << 25) ) // if the PLL was connected
{
PLLCON = 0x01;
PLLFEED = 0xAA; // disconnect the PLL
PLLFEED = 0x55;
PLLCON = 0x00;
PLLFEED = 0xAA; // disable the PLL
PLLFEED = 0x55;
}
else if ( PLLSTAT & (1 << 24) ) // if the PLL was enabled // 如果PLL已被使能,則先禁止PLL
{
PLLCON = 0x00;
PLLFEED = 0xAA; // disable the PLL
PLLFEED = 0x55;
}
SCS |= 0x20; // Enable the main OSC,,1MHz～20MHz
while( !(SCS & 0x40) ); // Wait until main OSC is usable
PLLCON = 1; // Enable but disconnect the PLL
CLKSRCSEL = 0x01; // select main OSC as the PLL clock source
PLLCFG = ( ( (PLL_NValue-1) << 16) | (PLL_MValue-1) ); // set the PLLCFG
PLLFEED = 0xAA; // Enable PLL
PLLFEED = 0x55;
while (((PLLSTAT & (1 << 24)) == 0)); // Wait until the PLL is usable
CCLKCFG = (Fcco/Fcclk - 1); // set the CCLKCFG
PLLCON = 3; // connect the PLL
PLLFEED = 0xAA;
PLLFEED = 0x55;
while (((PLLSTAT & (3 << 25)) == 0)); // Wait until the PLL is connected and locked
#if USE_USB
PCONP |= 0x80000000; // Turn On the USB PCLK
USBCLKCFG = (Fcco/Fusbclk - 1);
#endif
// Set system timers for each component
#if (Fpclk / (Fcclk / 4)) == 1
PCLKSEL0 = 0x00000000; // PCLK is 1/4 CCLK
PCLKSEL1 = 0x00000000;
#endif
#if (Fpclk / (Fcclk / 4)) == 2
PCLKSEL0 = 0xAAAAAAAA; // PCLK is 1/2 CCLK
PCLKSEL1 = 0xAAAAAAAA;
#endif
#if (Fpclk / (Fcclk / 4)) == 4
PCLKSEL0 = 0x55555555; // PCLK is the same as CCLK
PCLKSEL1 = 0x55555555;
#endif
/* Set memory accelerater module*/
MAMCR = 0;
#if Fcclk < 20000000
MAMTIM = 1;
#else
#if Fcclk < 40000000
MAMTIM = 2;
#else
MAMTIM = 3;
#endif
#endif
MAMCR = 2;
/* Initialize VIC*/
VICIntEnClr = 0xffffffff;
VICVectAddr = 0;
VICIntSelect = 0;
/* Add your codes here */
return;
}
/*********************************************************************************************************
** 以下為一些與系統相關的庫函數的實現
** 具體作用請ads的參考編譯器與庫函數手冊
** 用戶可以根據自己的要求修改
********************************************************************************************************/
/*********************************************************************************************************
** The implementations for some library functions
** For more details, please refer to the ADS compiler handbook and The library
** function manual
** User could change it as needed
********************************************************************************************************/
#include <rt_sys.h>
#include <stdio.h>
#pragma import(__use_no_semihosting_swi)
int __rt_div0(int a)
{
a = a;
return 0;
}
int fputc(int ch,FILE *f)
{
ch = ch;
f = f;
return 0;
}
int fgetc(FILE *f)
{
f = f;
return 0;
}
int _sys_close(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_write(FILEHANDLE fh, const unsigned char * buf,
unsigned len, int mode)
{
fh = fh;
buf = buf;
len =len;
mode = mode;
return 0;
}
int _sys_read(FILEHANDLE fh, unsigned char * buf,
unsigned len, int mode)
{
fh = fh;
buf = buf;
len =len;
mode = mode;
return 0;
}
void _ttywrch(int ch)
{
ch = ch;
}
int _sys_istty(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_seek(FILEHANDLE fh, long pos)
{
fh = fh;
return 0;
}
int _sys_ensure(FILEHANDLE fh)
{
fh = fh;
return 0;
}
long _sys_flen(FILEHANDLE fh)
{
fh = fh;
return 0;
}
int _sys_tmpnam(char * name, int sig, unsigned maxlen)
{
name = name;
sig = sig;
maxlen = maxlen;
return 0;
}
void _sys_exit(int returncode)
{
returncode = returncode;
}
char *_sys_command_string(char * cmd, int len)
{
cmd = cmd;
len = len;
return 0;
}
/*********************************************************************************************************
** End Of File
********************************************************************************************************/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -