19980615 version: qmail 1.03.19980614 doc: eliminated BIN.setup in favor of a web page.19980614 code: added other auto* to qmail-showctl output.19980614 doc: added pointer to immhf.html in qmail-header.5.19980614 doc: added note to TEST.receive about SMTP command format.19980614 doc: added FAQ 5.6 on qmail-qmqpd.19980614 code: removed unused variables in idedit.c.19980613 code: changed conf-patrn to 002.19980613 doc: moved SENDMAIL lower in INSTALL.19980612 code: added install-big.19980612 code: added BIN.Makefile.19980612 doc: added BIN.README, BIN.setup.19980612 code: switched to new install.19980611 code: added idedit.19980611 doc: added FAQ 1.3 on $QMAILMFTFILE.19980611 doc: used bouncesaying in FAQ 5.5.19980611 code: added except.19980611 code: added bouncesaying.19980611 code: allowed unbracketed IP addresses in dns_ipplus() and         dns_mxip().19980611 code: allowed spaces after colon in non-bracketed addresses in         qmail-smtpd.19980611 doc: cleaned up UPGRADE.19980528 bug: qmail-smtpd skips first character in rcpthosts() call.         tnx NND. impact: qmail-smtpd crashes on empty address; and it	 allows relaying to ""@any.host. fix: use addr.s.19980515 doc: expanded flock discussion in INSTALL.mbox.19980515 doc: eliminated flock warning from INSTALL.maildir.19980515 doc: split REMOVE.binmail out of INSTALL.19980515 doc: split REMOVE.sendmail out of INSTALL.19980515 doc: split TEST.deliver and TEST.receive out of INSTALL and         UPGRADE.19980515 doc: integrated INSTALL.boot into INSTALL.19980515 code: cleaned up final output in qmail-qmqpd.c.19980514 doc: updated procmail notes in INSTALL.mbox. tnx JRM.19980514 doc: changed FAQ 4.4 to point to INSTALL.mbox for procmail.         tnx JRM.19980514 code: separated HELO and EHLO; single-line response for HELO.         tnx to various people.19980430 version: qmail 1.02.19980430 doc: updated SECURITY.19980430 doc: fixed FAQ 4.9. tnx KB.19980430 code: changed quote2() to avoid quoting <>.19980429 code: changed quote_need() to quote empty local parts. tnx HHO.19980428 doc: added status notes to INSTALL and UPGRADE.19980428 code: skip setting environment in sendmail.c if PROTO is set.19980428 code: eliminated recipientmap.19980428 code: added virtual users to qmail-send.c. tnx RN.19980428 code: eliminated domain from rewrite() in qmail-send.c.19980428 code: added binm1, binm1+df, binm2, binm2+df, binm3, binm3+df.19980428 doc: eliminated most Mailbox references from INSTALL, UPGRADE.19980428 code: added config-fast.19980428 code: renamed qmail-config as config.19980428 code: supported QMAILMFTFILE in qmail-inject.c.19980428 code: recognized Mail-Followup-To in hfield.c.19980428 code: replaced rwrecip() with rwappend() in qmail-inject.c.19980428 code: cleaned up doheaderfile() in qmail-inject.c.19980426 code: eliminated -type test from qmail-qstat to speed it up.         tnx FT.19980421 doc: eliminated remove-rcpthosts comments from FAQ.19980421 doc: updated FAQ 4.3 to point to Russ Allbery's FAQ. 19980421 doc: took account of /var/qmail/boot in INSTALL, UPGRADE, and         INSTALL.vsm.19980421 code: added /var/qmail/boot, with home, home+df, proc, proc+df.19980421 doc: skipped make and make man in INSTALL.19980420 doc: cleaned up mbox description in SENDMAIL.19980420 code: changed QMQP port to official port 628.19980402 doc: updated qmsmac references to fastforward.19980402 doc: replaced qmail-upgrade man page with doc/SENDMAIL.19980402 code: added qmqpservers output to qmail-showctl.19980402 code: added qmail-qmqpd.19980402 code: added qmail-qmqpc.19980304 code: eliminated del_saywhynoexit in qmail-send.c.19980304 code: eliminated concurrencynodel in qmail-send.c.19980222 code: added status() to qmail-send.c.19980222 code: added concurrencyused to qmail-send.c.19980128 doc: added note to qmail-getpw.9 about ETXTBSY.19980127 code: eliminated err_seenmail() in qmail-smtpd.c. tnx PO.19980126 doc: used $DEFAULT in FAQ where possible.19980126 code: added DEFAULT in qmail-local.19980126 code: added -/ to qmail-pw2u.19980126 code: revamped qmeopen() as qmesearch() with more sensible         semantics, separating dash from ext cleanly.19980126 code: split qmeexists() out of qmeopen() in qmail-local.c.19980126 code: introduced safeext in qmail-local.c.19980126 code: changed ~alias to mode 2755, to put files into group         qmail rather than group nofiles under System V.19980126 doc: switched to /var/qmail/rc in INSTALL*, UPGRADE, FAQ.19980126 code: added rc.19980119 doc: added .qmail creation warning to condredirect.1.19980118 code: made auto_uids.c creation atomic in Makefile. tnx HHO.19980118 doc: added PIC.*.19980117 portability problem: Solaris 2.5.1 incorrectly converts         O_NDELAY into O_NONBLOCK for sockets, so that ndelay_off()	 fails to undo ndelay_on(). impact: none, since all the network	 readers here use select() via timeoutread(). fix: use	 O_NONBLOCK if it is defined.19980115 code: reformatted qmail-qmtpd.c.19980115 doc: changed tcpcontrol references in FAQ.19980115 doc: documented morercpthosts in qmail-qmtpd.9.19980115 code: eliminated unused datetime in qmail-qmtpd.c.19980115 code: eliminated sigalrm() in qmail-qmtpd.c.19980115 code: used rcpthosts() in qmail-smtpd.c, qmail-qmtpd.c.19980115 code: introduced rcpthosts.c.19980115 code: added morercpthosts.cdb support to qmail-showctl.19980115 code: added morercpthosts support to qmail-showctl.19980115 code: do_lst now returns file-exists in qmail-showctl.19980112 doc: documented morercpthosts in qmail-smtpd.9.19980112 code: added qmail-newmrh.19980112 code: used commands.c in qmail-popup.19980112 code: used commands.c in qmail-pop3d.19980112 code: introduced fakehelo in qmail-smtpd.19980112 code: moved flagbarf setting out of bmfcheck().19980112 code: allowed more address misformatting in qmail-smtpd.19980112 code: eliminated qmail@pobox.com help address in qmail-smtpd.19980112 code: reorganized qmail-smtpd.19980112 code: reformatted qmail-smtpd.19980112 code: used commands.c in qmail-smtpd.19980112 code: switched from 0 to "" for no arg in commands().19980112 code: added commands.c.19971230 doc: added -s to FreeBSD commands in INSTALL.ids. tnx TM.19971224 doc: added pointer to qmail pictures in README.19971223 doc: added note in FAQ about qmail-pop3d using maildir.19971219 code: added HOST2, HOST3, HOST4.19971219 code: renamed extx as x in qmail-local.c.19971219 doc: partitioned qmail-command.0.19971219 doc: updated FAQ 4.3 to point to newer majordomo patches.19971219 doc: eliminated qlist2 from FAQ.19971219 doc: eliminated qlist discussion from SECURITY.19971219 code: moved qlist, qlist2 to separate package.19971213 doc: added FAQ 4.10 on qmail-users generally.19971213 doc: added FAQ 4.9 on dealing with NFS outages.19971031 doc: added Linux and FreeBSD commands to INSTALL.ids. tnx TM.19971026 doc: added note about smtplf in qmail-smtpd.8. tnx S2S.19971014 doc: some tweaks to THOUGHTS.19971012 doc: used MAILER-DAEMON in UUCP example in INSTALL.19971003 code: eliminated dataline and getln() from qmail-remote.c.19971003 code: revamped blast() in qmail-remote.c.19971002 doc: added FAQ entries for .forward and /etc/aliases.19971002 doc: rewrote INSTALL.mbox and INSTALL.vsm.19971002 doc: renamed INSTALL.qsmhook as INSTALL.vsm.19971002 doc: emphasized the qmail-popup argv0 in FAQ.19971001 doc: added dot-forward note to BLURB3.19971001 doc: added more configuration notes to qmail-upgrade.9.19971001 doc: added note in INSTALL.qsmhook about dot-forward.19970930 code: token822_parse() now supports backslash as a quoting         character in atoms.19970929 doc: suggested symbolic links in INSTALL.mbox.19970925 doc: added note to INTERNALS about bounce stability.19970925 doc: added section to THOUGHTS discussing CNAME lookups.19970925 code: qmail-remote no longer does CNAME lookup on sender. tnx         C2F.19970923 portability problem: under SCO OSR5, splogger needs socket         libraries. impact: couldn't compile. fix: socket.lib. tnx RB.19970906 portability problem: under RISC/OS, Mail invokes sendmail -bm.         impact: can't send mail using Mail on RISC/OS. fix: ignore -bm.	 tnx NW.19970813 code: implemented databytes in qmail-qmtpd.19970813 code: implemented databytes. tnx M4S for sample code.19970813 code: replaced execvp() with execv() for sh in qmail-local.19970813 doc: said in qmail-control.9 that recipientmap allows comments.19970813 code: used strerr in qmail-local.c.19970813 code: changed timeoutread(), timeoutwrite() interface.19970813 code: eliminated shutdown() in timeoutread(), timeoutwrite().19970813 code: revamped I/O in qmail-smtpd.c.19970813 code: used timeoutread(), timeoutwrite() in qmail-smtpd.c.19970813 code: simplified getcontrol() logic in qmail-remote.c; some         out-of-memory messages are now cannot-read-control messages.19970813 code: eliminated scan_nbblong().19970813 code: reformatted qmail-remote.c.19970813 code: renamed flaganyrecipok as flagbother in qmail-remote.c.19970813 code: integrated status report into quit() in qmail-remote.c.19970813 code: revamped smtpcode() in qmail-remote.c.19970813 code: added flagcritical in qmail-remote.c. eliminates         possible-duplicate warning if dot has not yet been sent.19970813 code: revamped I/O in qmail-remote.c.19970813 code: quit immediately after sending QUIT in qmail-remote.c.19970813 code: made many more globals in qmail-remote.c.19970813 code: switched qmail-remote.c from subfdin to home-grown.19970813 code: switched qmail-remote.c from subfdout to subfdoutsmall.19970813 code: added LAST support to qmail-pop3d.19970812 code: changed qmail_close() success return from 0 to "".19970812 code: revamped I/O in qmail-qmtpd.c.19970812 code: added qmail-tcpok.19970812 code: used strerr in maildirmake.c.19970812 code: reformatted maildirmake.c.19970812 code: printed qp in condredirect.c.19970812 code: printed qqx in condredirect.c.19970812 code: revamped I/O in condredirect.c.19970812 code: reformatted condredirect.c.19970812 code: used strerr in preline.c.19970812 code: revamped I/O in preline.c.19970812 code: reformatted preline.c.19970812 code: printed qp in forward.c.19970812 code: printed qqx in forward.c.19970812 code: revamped I/O in forward.c.19970812 code: used strerr in forward.c.19970812 code: reformatted forward.c.19970812 code: used strerr in predate.c.19970812 code: forced failure in qmail-qmtpd if no recipients; saves         time for qmail-send.19970812 code: added smtpd() to sendmail.c.19970812 code: added mailq() to sendmail.c.19970812 code: added die_usage() to sendmail.c.19970812 code: reformatted sendmail.c.19970812 code: used byte_zero() in qmail-popup.c.19970812 code: reformatted qmail-popup.c.19970812 code: eliminated unused header files in qmail-popup.c.19970812 code: changed I/O system in qmail-popup.c to match qmail-pop3d. 19970812 doc: pointed people to the mailing list in INSTALL and UPGRADE.19970810 code: added TXTBSY check to qmail-getpw.c. this gives vendors         the opportunity to make getpwnam() reliable.19970810 code: moved non-deleted messages from new/ to cur/ in         qmail-pop3d. tnx to various people.19970810 code: introduced list() in qmail-pop3d.c.19970810 code: reformatted qmail-pop3d.c.19970810 code: merged dataline and newname into line in qmail-pop3d.c.19970810 code: chopped filenames in qmail-pop3d at colons for UIDL. tnx         to various people.19970810 code: eliminated printint(), printlong() in qmail-pop3d.c.19970810 code: revamped I/O in qmail-pop3d.c.19970810 code: used timeoutread(), timeoutwrite() in qmail-pop3d.c.19970810 code: eliminated die_prot() in qmail-pop3d.c.19970810 code: eliminated unused header files in qmail-pop3d.c.19970810 code: switched qmail-pop3d to use maildir.c. tnx MD.19970809 code: added uid/gid printing to qmail-showctl. tnx PGF.19970808 code: switched control.c from scan_nbblong to scan_ulong.19970808 code: cleaned up wait_pid to use waitpid() when possible, and         to support at least one extra child otherwise.19970807 code: in qmail-smtpd, treat long envelope addresses as a syntax         error, instead of waiting for qmail-queue to reject them.19970803 code: changed condredirect, forward, qlist, qmail-inject,         qmail-local, qmail-qmtpd, qmail-send, qmail-smtpd, qreceipt for	 new qmail_close() interface.19970803 code: revised qmail_close() to handle qmail-queue exit codes.