/* OmniVision OV76BE Camera Chip Support Code * * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> * http://alpha.dyndns.org/ov511/ * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. */#define DEBUG#include <linux/slab.h>#include "ovcamchip_priv.h"/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these * for now. */#define REG_GAIN		0x00	/* gain [5:0] */#define REG_BLUE		0x01	/* blue channel balance */#define REG_RED			0x02	/* red channel balance */#define REG_SAT			0x03	/* saturation */#define REG_CNT			0x05	/* Y contrast */#define REG_BRT			0x06	/* Y brightness */#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */#define REG_GAMMA_COEFF		0x0E	/* gamma settings */#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */#define REG_EXP			0x10	/* manual exposure setting */#define REG_CLOCK		0x11	/* polarity/clock prescaler */#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */#define REG_HWIN_START		0x17	/* horizontal window start */#define REG_HWIN_END		0x18	/* horizontal window end */#define REG_VWIN_START		0x19	/* vertical window start */#define REG_VWIN_END		0x1A	/* vertical window end */#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */#define REG_YOFFSET		0x21	/* Y channel offset */#define REG_UOFFSET		0x22	/* U channel offset */#define REG_ECW			0x24	/* exposure white level for AEC */#define REG_ECB			0x25	/* exposure black level for AEC */#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */#define REG_ALC			0x2C	/* Auto Level Control settings */#define REG_VOFFSET		0x2E	/* V channel offset adjustment */#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */#define REG_BIAS_ADJUST		0x34	/* misc bias settings *//* Window parameters */#define HWSBASE 0x38#define HWEBASE 0x3a#define VWSBASE 0x05#define VWEBASE 0x05struct ov76be {	int auto_brt;	int auto_exp;	int bandfilt;	int mirror;};/* NOTE: These are the same as the 7x10 settings, but should eventually be * optimized for the OV76BE */static struct ovcamchip_regvals regvals_init_76be[] = {	{ 0x10, 0xff },	{ 0x16, 0x03 },	{ 0x28, 0x24 },	{ 0x2b, 0xac },	{ 0x12, 0x00 },	{ 0x38, 0x81 },	{ 0x28, 0x24 },	/* 0c */	{ 0x0f, 0x85 },	/* lg's setting */	{ 0x15, 0x01 },	{ 0x20, 0x1c },	{ 0x23, 0x2a },	{ 0x24, 0x10 },	{ 0x25, 0x8a },	{ 0x26, 0xa2 },	{ 0x27, 0xc2 },	{ 0x2a, 0x04 },	{ 0x2c, 0xfe },	{ 0x2d, 0x93 },	{ 0x30, 0x71 },	{ 0x31, 0x60 },	{ 0x32, 0x26 },	{ 0x33, 0x20 },	{ 0x34, 0x48 },	{ 0x12, 0x24 },	{ 0x11, 0x01 },	{ 0x0c, 0x24 },	{ 0x0d, 0x24 },	{ 0xff, 0xff },	/* END MARKER */};/* This initializes the OV76be camera chip and relevant variables. */static int ov76be_init(struct i2c_client *c){	struct ovcamchip *ov = i2c_get_clientdata(c);	struct ov76be *s;	int rc;	DDEBUG(4, &c->dev, "entered");	rc = ov_write_regvals(c, regvals_init_76be);	if (rc < 0)		return rc;	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);	if (!s)		return -ENOMEM;	memset(s, 0, sizeof *s);	s->auto_brt = 1;	s->auto_exp = 1;	return rc;}static int ov76be_free(struct i2c_client *c){	struct ovcamchip *ov = i2c_get_clientdata(c);	kfree(ov->spriv);	return 0;}static int ov76be_set_control(struct i2c_client *c,			      struct ovcamchip_control *ctl){	struct ovcamchip *ov = i2c_get_clientdata(c);	struct ov76be *s = ov->spriv;	int rc;	int v = ctl->value;	switch (ctl->id) {	case OVCAMCHIP_CID_BRIGHT:		rc = ov_write(c, REG_BRT, v >> 8);		break;	case OVCAMCHIP_CID_SAT:		rc = ov_write(c, REG_SAT, v >> 8);		break;	case OVCAMCHIP_CID_EXP:		rc = ov_write(c, REG_EXP, v);		break;	case OVCAMCHIP_CID_FREQ:	{		int sixty = (v == 60);		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);		if (rc < 0)			goto out;		rc = ov_write(c, 0x2b, sixty?0x00:0xac);		if (rc < 0)			goto out;		rc = ov_write_mask(c, 0x76, 0x01, 0x01);		break;	}	case OVCAMCHIP_CID_BANDFILT:		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);		s->bandfilt = v;		break;	case OVCAMCHIP_CID_AUTOBRIGHT:		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);		s->auto_brt = v;		break;	case OVCAMCHIP_CID_AUTOEXP:		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);		s->auto_exp = v;		break;	case OVCAMCHIP_CID_MIRROR:		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);		s->mirror = v;		break;	default:		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);		return -EPERM;	}out:	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);	return rc;}static int ov76be_get_control(struct i2c_client *c,			      struct ovcamchip_control *ctl){	struct ovcamchip *ov = i2c_get_clientdata(c);	struct ov76be *s = ov->spriv;	int rc = 0;	unsigned char val = 0;	switch (ctl->id) {	case OVCAMCHIP_CID_BRIGHT:		rc = ov_read(c, REG_BRT, &val);		ctl->value = val << 8;		break;	case OVCAMCHIP_CID_SAT:		rc = ov_read(c, REG_SAT, &val);		ctl->value = val << 8;		break;	case OVCAMCHIP_CID_EXP:		rc = ov_read(c, REG_EXP, &val);		ctl->value = val;		break;	case OVCAMCHIP_CID_BANDFILT:		ctl->value = s->bandfilt;		break;	case OVCAMCHIP_CID_AUTOBRIGHT:		ctl->value = s->auto_brt;		break;	case OVCAMCHIP_CID_AUTOEXP:		ctl->value = s->auto_exp;		break;	case OVCAMCHIP_CID_MIRROR:		ctl->value = s->mirror;		break;	default:		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);		return -EPERM;	}	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);	return rc;}static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win){	int qvga = win->quarter;	/******** QVGA-specific regs ********/	ov_write(c, 0x14, qvga?0xa4:0x84);	/******** Palette-specific regs ********/	if (win->format == VIDEO_PALETTE_GREY) {		ov_write_mask(c, 0x0e, 0x40, 0x40);		ov_write_mask(c, 0x13, 0x20, 0x20);	} else {		ov_write_mask(c, 0x0e, 0x00, 0x40);		ov_write_mask(c, 0x13, 0x00, 0x20);	}	/******** Clock programming ********/	ov_write(c, 0x11, win->clockdiv);	/******** Resolution-specific ********/	if (win->width == 640 && win->height == 480)		ov_write(c, 0x35, 0x9e);	else		ov_write(c, 0x35, 0x1e);	return 0;}static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win){	int ret, hwscale, vwscale;	ret = ov76be_mode_init(c, win);	if (ret < 0)		return ret;	if (win->quarter) {		hwscale = 1;		vwscale = 0;	} else {		hwscale = 2;		vwscale = 1;	}	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));	return 0;}static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg){	switch (cmd) {	case OVCAMCHIP_CMD_S_CTRL:		return ov76be_set_control(c, arg);	case OVCAMCHIP_CMD_G_CTRL:		return ov76be_get_control(c, arg);	case OVCAMCHIP_CMD_S_MODE:		return ov76be_set_window(c, arg);	default:		DDEBUG(2, &c->dev, "command not supported: %d", cmd);		return -ENOIOCTLCMD;	}}struct ovcamchip_ops ov76be_ops = {	.init    =	ov76be_init,	.free    =	ov76be_free,	.command =	ov76be_command,};