/****************************************************************************** * * Name:	skgedrv.h * Project:	GEnesis, PCI Gigabit Ethernet Adapter * Version:	$Revision: 1.6 $ * Date:	$Date: 2002/07/15 15:38:01 $ * Purpose:	Interface with the driver * ******************************************************************************//****************************************************************************** * *	(C)Copyright 1998-2002 SysKonnect GmbH. * *	This program is free software; you can redistribute it and/or modify *	it under the terms of the GNU General Public License as published by *	the Free Software Foundation; either version 2 of the License, or *	(at your option) any later version. * *	The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * History: * *	$Log: skgedrv.h,v $ *	Revision 1.6  2002/07/15 15:38:01  rschmidt *	Power Management support *	Editorial changes * *	Revision 1.5  2002/04/25 11:05:47  rschmidt *	Editorial changes * *	Revision 1.4  1999/11/22 13:52:46  cgoos *	Changed license header to GPL. * *	Revision 1.3  1998/12/01 13:31:39  cgoos *	SWITCH INTERN Event added. * *	Revision 1.2  1998/11/25 08:28:38  gklug *	rmv: PORT SWITCH Event * *	Revision 1.1  1998/09/29 06:14:07  gklug *	add: driver events (initial version) * * ******************************************************************************/#ifndef __INC_SKGEDRV_H_#define __INC_SKGEDRV_H_/* defines ********************************************************************//* * Define the driver events. * Usually the events are defined by the destination module. * In case of the driver we put the definition of the events here. */#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */#define SK_DRV_NET_UP   		 2	/* The net is operational */#define SK_DRV_NET_DOWN			 3	/* The net is down */#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */#define SK_DRV_PORT_FAIL		 8	/* One port fails */#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */#define SK_DRV_POWER_DOWN		10	/* Power down mode */#endif	/* __INC_SKGEDRV_H_ */