/* * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $ * * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. * * Released under GPL */#ifndef __MTD_MTD_H__#define __MTD_MTD_H__#include <linux/types.h>#include <linux/mtd/mtd-abi.h>#define MAX_MTD_DEVICES 16#define MTD_ERASE_PENDING      	0x01#define MTD_ERASING		0x02#define MTD_ERASE_SUSPEND	0x04#define MTD_ERASE_DONE          0x08#define MTD_ERASE_FAILED        0x10/* If the erase fails, fail_addr might indicate exactly which block failed.  If   fail_addr = 0xffffffff, the failure was not at the device level or was not   specific to any particular block. */struct erase_info {	struct mtd_info *mtd;	u_int32_t addr;	u_int32_t len;	u_int32_t fail_addr;	u_long time;	u_long retries;	u_int dev;	u_int cell;	void (*callback) (struct erase_info *self);	u_long priv;	u_char state;	struct erase_info *next;};struct mtd_erase_region_info {	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */	u_int32_t erasesize;		/* For this region */	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */};struct mtd_info {	u_char type;	u_int32_t flags;	u_int32_t size;	 /* Total size of the MTD */	/* "Major" erase size for the device. Na飗e users may take this	 * to be the only erase size available, or may use the more detailed	 * information below if they desire	 */	u_int32_t erasesize;	u_int32_t oobblock;  /* Size of OOB blocks (e.g. 512) */	u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */	u_int32_t oobavail;  /* Number of bytes in OOB area available for fs  */	u_int32_t ecctype;	u_int32_t eccsize;	/* Kernel-only stuff starts here. */	char *name;	int index;	/* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */	struct nand_oobinfo oobinfo;	/* Data for variable erase regions. If numeraseregions is zero,	 * it means that the whole device has erasesize as given above.	 */	int numeraseregions;	struct mtd_erase_region_info *eraseregions;	/* This really shouldn't be here. It can go away in 2.5 */	u_int32_t bank_size;	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);	/* This stuff for eXecute-In-Place */	int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */	void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);	/*	 * Methods to access the protection register area, present in some	 * flash devices. The user data is one time programmable but the	 * factory data is read only.	 */	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);	/* This function is not yet implemented */	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);#if 0	/* kvec-based read/write methods. We need these especially for NAND flash,	   with its limited number of write cycles per erase.	   NB: The 'count' parameter is the number of _vectors_, each of	   which contains an (ofs, len) tuple.	*/	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);#endif	/* Sync */	void (*sync) (struct mtd_info *mtd);#if 0	/* Chip-supported device locking */	int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);	int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);	/* Power Management functions */	int (*suspend) (struct mtd_info *mtd);	void (*resume) (struct mtd_info *mtd);#endif	/* Bad block management functions */	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);	void *priv;	struct module *owner;	int usecount;};	/* Kernel-side ioctl definitions */extern int add_mtd_device(struct mtd_info *mtd);extern int del_mtd_device (struct mtd_info *mtd);extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);extern void put_mtd_device(struct mtd_info *mtd);#if 0struct mtd_notifier {	void (*add)(struct mtd_info *mtd);	void (*remove)(struct mtd_info *mtd);	struct list_head list;};extern void register_mtd_user (struct mtd_notifier *new);extern int unregister_mtd_user (struct mtd_notifier *old);int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,		       unsigned long count, loff_t to, size_t *retlen);int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,		      unsigned long count, loff_t from, size_t *retlen);#endif#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0)#ifdef CONFIG_MTD_PARTITIONSvoid mtd_erase_callback(struct erase_info *instr);#elsestatic inline void mtd_erase_callback(struct erase_info *instr){	if (instr->callback)		instr->callback(instr);}#endif/* * Debugging macro and defines */#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */#define MTD_DEBUG_LEVEL1	(1)	/* Audible */#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */#ifdef CONFIG_MTD_DEBUG#define DEBUG(n, args...)				\ 	do {						\		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\			printk(KERN_INFO args);		\	} while(0)#else /* CONFIG_MTD_DEBUG */#define DEBUG(n, args...) do { } while(0)#endif /* CONFIG_MTD_DEBUG */#endif /* __MTD_MTD_H__ */