.
MessageId=60907 SymbolicName=MSG_DUMP_DISABLED
Language=English
Device is disabled.
.
MessageId=60908 SymbolicName=MSG_DUMP_NOTSTARTED
Language=English
Device is currently stopped.
.
MessageId=60909 SymbolicName=MSG_DUMP_NO_RESOURCES
Language=English
Device is not using any resources.
.
MessageId=60910 SymbolicName=MSG_DUMP_NO_RESERVED_RESOURCES
Language=English
Device has no resources reserved.
.
MessageId=60911 SymbolicName=MSG_DUMP_RESOURCES
Language=English
Device is currently using the following resources:
.
MessageId=60912 SymbolicName=MSG_DUMP_RESERVED_RESOURCES
Language=English
Device has the following resources reserved:
.
MessageId=60913 SymbolicName=MSG_DUMP_DRIVER_FILES
Language=English
Driver installed from %2 [%3]. %1!u! file(s) used by driver:
.
MessageId=60914 SymbolicName=MSG_DUMP_NO_DRIVER_FILES
Language=English
Driver installed from %2 [%3]. No files used by driver.
.
MessageId=60915 SymbolicName=MSG_DUMP_NO_DRIVER
Language=English
No driver information available for device.
.
MessageId=60916 SymbolicName=MSG_DUMP_HWIDS
Language=English
Hardware ID's:
.
MessageId=60917 SymbolicName=MSG_DUMP_COMPATIDS
Language=English
Compatible ID's:
.
MessageId=60918 SymbolicName=MSG_DUMP_NO_HWIDS
Language=English
No hardware/compatible ID's available for this device.
.
MessageId=60919 SymbolicName=MSG_DUMP_NO_DRIVERNODES
Language=English
No DriverNodes found for device.
.
MessageId=60920 SymbolicName=MSG_DUMP_DRIVERNODE_HEADER
Language=English
DriverNode #%1!u!:
.
MessageId=60921 SymbolicName=MSG_DUMP_DRIVERNODE_INF
Language=English
Inf file is %1
.
MessageId=60922 SymbolicName=MSG_DUMP_DRIVERNODE_SECTION
Language=English
Inf section is %1
.
MessageId=60923 SymbolicName=MSG_DUMP_DRIVERNODE_DESCRIPTION
Language=English
Driver description is %1
.
MessageId=60924 SymbolicName=MSG_DUMP_DRIVERNODE_MFGNAME
Language=English
Manufacturer name is %1
.
MessageId=60925 SymbolicName=MSG_DUMP_DRIVERNODE_PROVIDERNAME
Language=English
Provider name is %1
.
MessageId=60926 SymbolicName=MSG_DUMP_DRIVERNODE_DRIVERDATE
Language=English
Driver date is %1
.
MessageId=60927 SymbolicName=MSG_DUMP_DRIVERNODE_DRIVERVERSION
Language=English
Driver version is %1!u!.%2!u!.%3!u!.%4!u!
.
MessageId=60928 SymbolicName=MSG_DUMP_DRIVERNODE_RANK
Language=English
Driver node rank is %1!u!
.
MessageId=60929 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS
Language=English
Driver node flags are %1!08X!
.
MessageId=60930 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS_OLD_INET_DRIVER
Language=English
Inf came from the Internet
.
MessageId=60931 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS_BAD_DRIVER
Language=English
Driver node is marked as BAD
.
MessageId=60932 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS_INF_IS_SIGNED
Language=English
Inf is digitally signed
.
MessageId=60933 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS_OEM_F6_INF
Language=English
Inf was installed using F6 during textmode setup
.
MessageId=60934 SymbolicName=MSG_DUMP_DRIVERNODE_FLAGS_BASIC_DRIVER
Language=English
Driver provides basic functionality if no other signed driver exists.
.
MessageId=60935 SymbolicName=MSG_DUMP_DEVICESTACK_UPPERCLASSFILTERS
Language=English
Class upper filters:
.
MessageId=60936 SymbolicName=MSG_DUMP_DEVICESTACK_UPPERFILTERS
Language=English
Upper filters:
.
MessageId=60937 SymbolicName=MSG_DUMP_DEVICESTACK_SERVICE
Language=English
Controlling service:
.
MessageId=60938 SymbolicName=MSG_DUMP_DEVICESTACK_NOSERVICE
Language=English
(none)
.
MessageId=60939 SymbolicName=MSG_DUMP_DEVICESTACK_LOWERCLASSFILTERS
Language=English
Class lower filters:
.
MessageId=60940 SymbolicName=MSG_DUMP_DEVICESTACK_LOWERFILTERS
Language=English
Lower filters:
.
MessageId=60941 SymbolicName=MSG_DUMP_SETUPCLASS
Language=English
Setup Class: %1 %2
.
MessageId=60942 SymbolicName=MSG_DUMP_NOSETUPCLASS
Language=English
Device not setup.
.
MessageId=60943 SymbolicName=MSG_DUMP_DESCRIPTION
Language=English
Name: %1
.

;//
;// INSTALL
;//
MessageId=61000 SymbolicName=MSG_INSTALL_LONG
Language=English
%1 [-r] %2 <inf> <hwid>
Manually installs a device.
This command will only work for local machine.
Specify -r to reboot automatically if needed.
<inf> is an INF to use to install the device.
<hwid> is a hardware ID to apply to the device.
.
MessageId=61001 SymbolicName=MSG_INSTALL_SHORT
Language=English
%1!-20s! Manually install a device.
.
MessageId=61002 SymbolicName=MSG_INSTALL_UPDATE
Language=English
Device node created. Install is complete when drivers are updated...
.

;//
;// UPDATE
;//
MessageId=61100 SymbolicName=MSG_UPDATE_LONG
Language=English
%1 [-r] %2 <inf> <hwid>
Update drivers for devices.
This command will only work for local machine.
Specify -r to reboot automatically if needed.
<inf> is an INF to use to install the device.
All devices that match <hwid> are updated.
.
MessageId=61101 SymbolicName=MSG_UPDATE_SHORT
Language=English
%1!-20s! Manually update a device.
.
MessageId=61102 SymbolicName=MSG_UPDATE_INF
Language=English
Updating drivers for %1 from %2.
.
MessageId=61103 SymbolicName=MSG_UPDATE
Language=English
Updating drivers for %1.
.
MessageId=61104 SymbolicName=MSG_UPDATENI_LONG
Language=English
%1 [-r] %2 <inf> <hwid>
Update drivers for devices (Non Interactive).
This command will only work for local machine.
Specify -r to reboot automatically if needed.
<inf> is an INF to use to install the device.
All devices that match <hwid> are updated.
Unsigned installs will fail. No UI will be
presented.
.
MessageId=61105 SymbolicName=MSG_UPDATENI_SHORT
Language=English
%1!-20s! Manually update a device (non interactive).
.
MessageId=61106 SymbolicName=MSG_UPDATE_OK
Language=English
Drivers updated successfully.
.

;//
;// REMOVE
;//
MessageId=61200 SymbolicName=MSG_REMOVE_LONG
Language=English
%1 [-r] %2 <id> [<id>...]
%1 [-r] %2 =<class> [<id>...]
Remove devices that match the specific hardware or instance ID.
This command will only work for local machine.
Specify -r to reboot automatically if needed.
Examples of <id> are:
*                  - All devices (not recommended)
ISAPNP\PNP0501     - Hardware ID
*PNP*              - Hardware ID with wildcards (* matches anything)
@ISAPNP\*\*        - Instance ID with wildcards (@ prefixes instance ID)
<class> is a setup class name as obtained from the classes command.
.
MessageId=61201 SymbolicName=MSG_REMOVE_SHORT
Language=English
%1!-20s! Remove devices that match the specific hardware or instance ID.
.
MessageId=61202 SymbolicName=MSG_REMOVE_TAIL_NONE
Language=English
No devices removed.
.
MessageId=61203 SymbolicName=MSG_REMOVE_TAIL_REBOOT
Language=English
Not all of %1!u! device(s) removed, at least one requires reboot to complete the operation.
.
MessageId=61204 SymbolicName=MSG_REMOVE_TAIL
Language=English
%1!u! device(s) removed.
.

;//
;// RESCAN
;//
MessageId=61300 SymbolicName=MSG_RESCAN_LONG
Language=English
%1 [-m:\\<machine>]
Tell plug&play to scan for new hardware.
.
MessageId=61301 SymbolicName=MSG_RESCAN_SHORT
Language=English
%1!-20s! Scan for new hardware.
.
MessageId=61302 SymbolicName=MSG_RESCAN_LOCAL
Language=English
Scanning for new hardware.
.
MessageId=61303 SymbolicName=MSG_RESCAN
Language=English
Scanning for new hardware on %1.
.
MessageId=61304 SymbolicName=MSG_RESCAN_OK
Language=English
Scanning completed.
.

;//
;// DRIVERNODES
;//
MessageId=61400 SymbolicName=MSG_DRIVERNODES_LONG
Language=English
%1 %2 <id> [<id>...]
%1 %2 =<class> [<id>...]
Lists driver nodes for devices that match the specific hardware or instance ID.
This command will only work for local machine.
Examples of <id> are:
*                  - All devices
ISAPNP\PNP0501     - Hardware ID
*PNP*              - Hardware ID with wildcards (* matches anything)
@ISAPNP\*\*        - Instance ID with wildcards (@ prefixes instance ID)
<class> is a setup class name as obtained from the classes command.
.
MessageId=61401 SymbolicName=MSG_DRIVERNODES_SHORT
Language=English
%1!-20s! Lists all the driver nodes of devices.
.

;//
;// CLASSFILTER
;//
MessageId=61500 SymbolicName=MSG_CLASSFILTER_LONG
Language=English
%1 %2 <class> upper <subcmds> - Upper filters.
%1 %2 <class> lower <subcmds> - Lower filters.
Modifies upper and lower filters for a device setup class. Changes do not take effect until the effected devices are restarted or the machine is rebooted.

Where <subcmds> iterate the list of services, modifying the services in the filter. In the context of this command, each sub-command works on services in the list relative to previous sub-commands. Examples below.
=     - move back to start of list of services (no "current" service). This is
        assumed prior to the first sub-command.
@svc  - move forward to specified service and treat it as "current" for the next
        sub-command.
!svc  - delete instance of specified service that's after "current" service.
        The place where the deleted service was is now considered the "current"
        service, making '-' and '+' behave exactly the same.
-svc  - insert service before current service (or beginning if none). Inserted
        service becomes new current service.
+svc  - insert service after current service (or end if none). Inserted service
        becomes new current service.

Examples:
If upperfilters of setup class "foo" is A,B,C,B,D,B,E:
%1 %2 foo upper @D !B  - delete the 3rd 'B'.
%1 %2 foo upper !B !B !B - delete all 3 instances of 'B'.
%1 %2 foo upper =!B =!A  - delete first 'B' and first 'A'.
%1 %2 foo upper !C +CC   - replaces 'C' with 'CC'.
%1 %2 foo upper @D -CC   - inserts 'CC' before 'D'.
%1 %2 foo upper @D +CC   - inserts 'CC' after 'D'.
%1 %2 foo upper -CC      - inserts 'CC' before 'A'.
%1 %2 foo upper +CC      - inserts 'CC' after 'E'.
%1 %2 foo upper @D +X +Y - inserts 'X' after 'D' and 'Y' after 'X'.
%1 %2 foo upper @D -X -Y - inserts 'X' before 'D' and 'Y' before 'X'.
%1 %2 foo upper @D -X +Y - inserts 'X' before 'D' and 'Y' between 'X' and 'D'.
.

MessageId=61501 SymbolicName=MSG_CLASSFILTER_SHORT
Language=English
%1!-20s! Allows modification of class filters.
.
MessageId=61502 SymbolicName=MSG_CLASSFILTER_CHANGED
Language=English
Class filters changed. Class devices must be restarted for changes to take effect.
.
MessageId=61503 SymbolicName=MSG_CLASSFILTER_UNCHANGED
Language=English
Class filters unchanged.
.
;//
;// SETHWID
;//
MessageId=61600 SymbolicName=MSG_SETHWID_LONG
Language=English
%1 [-m:\\<machine>] %2 <id> [<id>...] := <subcmds>
%1 [-m:\\<machine>] %2 =<class> [<id>...] := <subcmds>
Modifies the hardware ID's of the listed devices. This command will only work for root-enumerated devices.
This command will work for a remote machine.
Examples of <id> are:
*                  - All devices (not recommended)
ISAPNP\PNP0601     - Hardware ID
*PNP*              - Hardware ID with wildcards (* matches anything)
@ROOT\*\*          - Instance ID with wildcards (@ prefixes instance ID)
<class> is a setup class name as obtained from the classes command.

<subcmds> consists of one or more:
=hwid              - Clear hardware ID list and set it to hwid.
+hwid              - Add or move hardware ID to head of list (better match).
-hwid              - Add or move hardware ID to end of list (worse match).
!hwid              - Remove hardware ID from list.
hwid               - each additional hardware id is inserted after the previous.
.
MessageId=61601 SymbolicName=MSG_SETHWID_SHORT
Language=English
%1!-20s! Modify Hardware ID's of listed root-enumerated devices.
.

MessageId=61602 SymbolicName=MSG_SETHWID_TAIL_NONE
Language=English
No hardware ID's modified.
.
MessageId=61603 SymbolicName=MSG_SETHWID_TAIL_SKIPPED
Language=English
Skipped %1!u! non-root hardware ID(s), modified %2!u! hardware ID(s).
.
MessageId=61604 SymbolicName=MSG_SETHWID_TAIL_MODIFIED
Language=English
Modified %1!u! hardware ID(s).
.
MessageId=61605 SymbolicName=MSG_SETHWID_NOTROOT
Language=English
Skipping (Not root-enumerated).
.