--The IEEE standard 1164 package, declares std_logic, rising_edge(), etc.
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity scan2 is
  port (rst,clk : in STD_LOGIC;
        a,b: in STD_LOGIC_vector(6 downto 0);
        pa,pb : out STD_LOGIC;
        mux_out: out STD_LOGIC_vector(6 downto 0));
end scan2;
architecture arch of scan2 is
  signal sel : std_logic_vector(1 downto 0);
begin
  process (rst,clk,A, B)
  begin
    if rst='1' then sel<="00";
    elsif rising_edge(clk) then
          sel<= sel + "01" ;
          case SEL is
          when "00" => MUX_OUT <= A;
                       pa<='1';pb<='0';
          when "01" => pa<='0';pb<='0';
          when "10" => MUX_OUT <= B; 
                       pa<='0';pb<='1';
          when "11" => pa<='0';pb<='0'; 
          when others => MUX_OUT <= "1011111";
        end case;
    end if;
  end process;
end arch;