//****************************************************************************
// @Module        Asynchronous/Synchronous Serial Interface (ASC0)
// @Filename      ASC0.C
// @Project       svm.dav
//----------------------------------------------------------------------------
// @Controller    Infineon XC167CI-16F40
//
// @Compiler      Keil
//
// @Codegenerator 2.1
//
// @Description   This file contains functions that use the ASC0 module.
//
//----------------------------------------------------------------------------
// @Date          19.12.2003 11:31:19
//
//****************************************************************************

// USER CODE BEGIN (ASC0_General,1)

// USER CODE END



//****************************************************************************
// @Project Includes
//****************************************************************************

#include "MAIN.H"

// USER CODE BEGIN (ASC0_General,2)

// USER CODE END


//****************************************************************************
// @Macros
//****************************************************************************

// USER CODE BEGIN (ASC0_General,3)

// USER CODE END


//****************************************************************************
// @Defines
//****************************************************************************

// USER CODE BEGIN (ASC0_General,4)

// USER CODE END


//****************************************************************************
// @Typedefs
//****************************************************************************

// USER CODE BEGIN (ASC0_General,5)

// USER CODE END


//****************************************************************************
// @Imported Global Variables
//****************************************************************************

// USER CODE BEGIN (ASC0_General,6)

// USER CODE END


//****************************************************************************
// @Global Variables
//****************************************************************************

// USER CODE BEGIN (ASC0_General,7)

// USER CODE END


//****************************************************************************
// @External Prototypes
//****************************************************************************

// USER CODE BEGIN (ASC0_General,8)

// USER CODE END


//****************************************************************************
// @Prototypes Of Local Functions
//****************************************************************************

// USER CODE BEGIN (ASC0_General,9)

// USER CODE END


//****************************************************************************
// @Function      void ASC0_vInit(void) 
//
//----------------------------------------------------------------------------
// @Description   This is the initialization function of the ASC0 function 
//                library. It is assumed that the SFRs used by this library 
//                are in its reset state. 
//
//----------------------------------------------------------------------------
// @Returnvalue   None
//
//----------------------------------------------------------------------------
// @Parameters    None
//
//----------------------------------------------------------------------------
// @Date          19.12.2003
//
//****************************************************************************

// USER CODE BEGIN (Init,1)

// USER CODE END

void ASC0_vInit(void)
{
  // USER CODE BEGIN (Init,2)

  // USER CODE END

  ///  -----------------------------------------------------------------------
  ///  Configuration of the ASC0 Baudrate Generator:
  ///  -----------------------------------------------------------------------
  ///  - additionally reduce serial clock to 2
  ///  - required baud rate = 9,600 kbaud
  ///  - real baud rate     = 9,615 kbaud
  ///  - deviation          = 0,160 %

  //ASC0_BG        =  0x0081;      // load ASC0 baud rate time reload register

  ///  -----------------------------------------------------------------------
  ///  Configuration of the ASC0 Operation Mode:
  ///  -----------------------------------------------------------------------
  ///  - 8-bit data asychronous operation with one stop bit
  ///  - receiver is enabled

  //ASC0_CON       =  0x0011;      // load ASC0 control register

  ///  -----------------------------------------------------------------------
  ///  FIFO Configuration:
  ///  -----------------------------------------------------------------------
  ///  - receive FIFO is disabled
  ///  - transmit FIFO is disabled

  //ASC0_RXFCON    =  0x0102;      // load ASC0 receive FIFO control register
  //ASC0_TXFCON    =  0x0102;      // load ASC0 transmit FIFO control register

  ///  -----------------------------------------------------------------------
  ///  Configuration of the used ASC0 Port Pins:
  ///  -----------------------------------------------------------------------
  ///  - P3.10 is used for ASC Transmit Data Output (TxDA0)
  ///  - P3.11 is used for ASC0 Receive data Input (RxDA0)

  //ALTSEL0P3     |=  0x0400;      // select alternate output function
  //P3   = (P3   & ~(uword)0x0400) | 0x0400;    //set data register
  //DP3  = (DP3  & ~(uword)0x0400) | 0x0400;    //set direction register

  ///  -----------------------------------------------------------------------
  ///  Configuration of the used ASC0 Interrupts:
  ///  -----------------------------------------------------------------------

  // USER CODE BEGIN (ASC0_Function,3)
	//ASC0_TIC_IR=1;
  // USER CODE END

  //ASC0_CON      |=  0x8000;      // enable baud rate generator
   ASC0_CON       =  0x8811;      // load ASC0 control register
   ASC0_BG        =  0x000E;      // load ASC0 baud rate time reload register 38400
   ASC0_FDV       =  0x0076;
   ASC0_RXFCON    =  0x0102;      // load ASC0 receive FIFO control register
   ASC0_TXFCON    =  0x0102;      // load ASC0 transmit FIFO control register
   ASC1_CON       =  0x8811;      // load ASC1 control register
   ASC1_BG        =  0x000E;      // load ASC1 baud rate time reload register 38400
   ASC1_FDV       =  0x0076;
   ASC1_RXFCON    =  0x0102;      // load ASC1 receive FIFO control register
   ASC1_TXFCON    =  0x0102;      // load ASC1 transmit FIFO control register
   ALTSEL0P3     |=  0x0420;      // 10bit-1,5bit-1: select alternate output function   XC164需要配置
   P3            |=  0x0400;      // 10bit-1: set data register
   DP3            =  (DP3  & ~(unsigned int)0x0802) | 0x0420;    // 11bit-0,10bit-1,5bit-1,1bit-0: set direction register

} //  End of function ASC0_vInit


//****************************************************************************
// @Function      void ASC0_vSendData(uword uwData) 
//
//----------------------------------------------------------------------------
// @Description   This function writes a send data initialization word into 
//                the transmit buffer register.
//                
//                Note: 
//                In a multiprocessor system the master with this function 
//                has the possibility to send data to the selected slave. To 
//                achieve this, the 9th bit must set on zero.
//
//----------------------------------------------------------------------------
// @Returnvalue   None
//
//----------------------------------------------------------------------------
// @Parameters    uwData: 
//                Data to be send
//
//----------------------------------------------------------------------------
// @Date          19.12.2003
//
//****************************************************************************

// USER CODE BEGIN (SendData,1)

// USER CODE END

void ASC0_vSendData(uword uwData)
{
  ASC0_TBIC_IR = 0;        //  reset transmit buffer interrupt request 
  ASC0_TBUF    = uwData;   //  load transmit buffer register

} //  End of function ASC0_vSendData


//****************************************************************************
// @Function      uword ASC0_uwGetData(void) 
//
//----------------------------------------------------------------------------
// @Description   This function reads out the content of the receive buffer 
//                register which contains the received data.
//
//----------------------------------------------------------------------------
// @Returnvalue   data that has been received
//
//----------------------------------------------------------------------------
// @Parameters    None
//
//----------------------------------------------------------------------------
// @Date          19.12.2003
//
//****************************************************************************

// USER CODE BEGIN (GetData,1)

// USER CODE END

uword ASC0_uwGetData(void)
{
  ASC0_RIC_IR = 0;       // reset receive interrupt request
  return(ASC0_RBUF);     // return receive buffer register

} //  End of function ASC0_uwGetData




// USER CODE BEGIN (ASC0_General,10)

// USER CODE END