#include <iom128v.h>
/*鍵盤掃描函數(shù),沒有鍵按下返回0x7f*/
/*如果shift按下，返回值最高位為1*/
extern void delay_ms(unsigned int time);
unsigned char scan_key(void)
   {
    unsigned char i,temp;
    unsigned shift=0;
    DDRB=0x0f;	
	PORTB=0xff;	  
    for (i=0;i<4;i++)
        {
         PORTB=~(1<<i); //鍵盤線掃描
         delay_ms(5);   //等待低電平穩(wěn)定
         temp=PINB&0xf0;//讀取鍵盤掃描信號,屏蔽低四位
         if ((PIND&0x20)==0) temp|=01;//檢查shift鍵
         if (temp!=0xf0)//如果有鍵按下，延時10ms消抖
            {           //本程序用display代替10ms延時,
             delay_ms(5); //可消除顯示抖動
             temp=PINB&0xf0;//再讀鍵盤
             if ((PIND&0x20)==0) //檢查shift鍵
                {
                 temp|=01;
                 shift=1;
                }
             if (temp!=0xf0)
                {
                 temp&=0xf0;
                 switch (temp) //計算鍵值
                     {
				      case 0x70:temp=15-(3-i)*4;break;
                      case 0xb0:temp=14-(3-i)*4;break;
                      case 0xd0:temp=13-(3-i)*4;break;
                      case 0xe0:temp=12-(3-i)*4;break;
                      default:temp=0x7f;					 
                      }
                 if (shift==1) temp|=0x80; 
                 return temp;
                 }		 
       	     }
         PORTB=0xff;	 
        }
    return 0x7f;			 
    }
unsigned char keypad(void)
    {
	 unsigned char temp1,temp2;
	 temp1=scan_key();
	 if (temp1==0x7f) return 0x7f;
	 do
	   temp2=scan_key();
	 while (temp1==temp2);
	 return temp1;	 
	}