?? def9603.h
字號(hào):
/**********************************************************************//* 9603 I/O address definition *//**********************************************************************///#define USBN9603_addr 0x0000/**********************************************************************//* 9603 register and bit definitions *//**********************************************************************/#define MCNTRL 0x00 /*Main control register */#define CCONF 0x01 /*Clk. config. register *///Regster 0x02 is Reserved//#define TCR 0x02 /*Xcvr config. register */#define RID 0x03 /*Rev. ID register */#define FAR 0x04 /*Func address register */#define NFSR 0x05 /*Node func st register */#define MAEV 0x06 /*Main event register */#define MAMSK 0x07 /*Main mask register */#define ALTEV 0x08 /*Alt. event register */#define ALTMSK 0x09 /*ALT mask register */#define TXEV 0x0A /*TX event register */#define TXMSK 0x0B /*TX mask register */#define RXEV 0x0C /*RX event register */#define RXMSK 0x0D /*RX mask register */#define NAKEV 0x0E /*NAK event register */#define NAKMSK 0x0F /*NAK mask register */#define FWEV 0x10 /*FIFO warning register */#define FWMSK 0x11 /*FIFO warning mask */#define FNH 0x12 /*Frame nbr hi register */#define FNL 0x13 /*Frame nbr lo register */#define DMACNTRL 0x14 /*DMA control register */#define DMAEV 0x15 /*DMA event register */#define DMAMSK 0x16 /*DMA Mask register */#define MIR 0x17 /*mirror register */#define DMACNT 0x18 /*DMA Count register */#define DMAERR 0x19 /*DMA Error register *///Regster 0x1A is Reserved#define WKUP 0x1B /*Wakeup register *///Regster 0x1C is Reserved//Regster 0x1D is Reserved//Regster 0x1E is Reserved//Regster 0x1F is Reserved#define EPC0 0x20 /*Endpoint0 register */#define TXD0 0x21 /*TX data register 0 */#define TXS0 0x22 /*TX status register 0 */#define TXC0 0x23 /*TX command register 0 *///Regster 0x24 is Reserved#define RXD0 0x25 /*RX data register 0 */#define RXS0 0x26 /*RX status register 0 */#define RXC0 0x27 /*RX command register 0 */#define EPC1 0x28 /*Endpoint1 register */#define TXD1 0x29 /*TX data register 1 */#define TXS1 0x2A /*TX status register 1 */#define TXC1 0x2B /*TX command register 1 */#define EPC2 0x2C /*Endpoint2 register */#define RXD1 0x2D /*RX data register 1 */#define RXS1 0x2E /*RX status register 1 */#define RXC1 0x2F /*RX command register 1 */#define EPC3 0x30 /*Endpoint3 register */#define TXD2 0x31 /*TX data register 2 */#define TXS2 0x32 /*TX status register 2 */#define TXC2 0x33 /*TX command register 2 */#define EPC4 0x34 /*Endpoint4 register */#define RXD2 0x35 /*RX data register 2 */#define RXS2 0x36 /*RX status register 2 */#define RXC2 0x37 /*RX command register 2 */#define EPC5 0x38 /*Endpoint5 register */#define TXD3 0x39 /*TX data register 3 */#define TXS3 0x3A /*TX status register 3 */#define TXC3 0x3B /*TX command register 3 */#define EPC6 0x3C /*Endpoint6 register */#define RXD3 0x3D /*RX data register 3 */#define RXS3 0x3E /*RX status register 3 */#define RXC3 0x3F /*RX command register 3 *//* MCNTRL bits ********************************************************/#define SRST 0x01 /*software reset */#define DBG 0x02 /*debug mode */#define VGE 0x04 /*voltage regulator enable*/#define NAT 0x08 /*node attached */#define INT_DIS 0x00 /*interrupts disabled */#define INT_L_O 0x40 /*act lo ints, open drain */#define INT_H_P 0x80 /*act hi ints, push pull */#define INT_L_P 0xC0 /*act lo ints, push pull *//* CCONF bits ********************************************************/#define CODIS 0x80 /*disable clock output *//* FAR bits ********************************************************/#define AD_EN 0x80 /*address enable *//* EPCX bits ********************************************************/#define DEF 0x40 /*force def. adr (0 only) */#define STALL 0x80 /*force stall handshakes */#define ISO 0x20 /*set for isochr. (1-3) */#define EP_EN 0x10 /*enables endpt. (1-3) *//* NFSR bits ********************************************************/#define RST_ST 0x00 /*reset state */#define RSM_ST 0x01 /*resume state */#define OPR_ST 0x02 /*operational state */#define SUS_ST 0x03 /*suspend state *//* MAEV, MAMSK bits ***************************************************/#define WARN 0x01 /*warning bit has been set*/#define ALT 0x02 /*alternate event */#define TX_EV 0x04 /*transmit event */#define FRAME 0x08 /*SOF packet received */#define NAK 0x10 /*NAK event */#define ULD 0x20 /*unlock locked detected */#define RX_EV 0x40 /*receive event */#define INTR_E 0x80 /*master interrupt enable *//* ALTEV, ALTMSK bits *************************************************/#define EOP 0x08 /*end of packet */#define SD3 0x10 /*3 ms suspend */#define SD5 0x20 /*5 ms suspend */#define RESET_A 0x40 /*reset detected */#define RESUME_A 0x80 /*resume detected *//* TXEV, TXMSK bits ***************************************************/#define TXFIFO0 0x01 /*TX_DONE, FIFO 0 */#define TXFIFO1 0x02 /*TX_DONE, FIFO 1 */#define TXFIFO2 0x04 /*TX_DONE, FIFO 2 */#define TXFIFO3 0x08 /*TX_DONE, FIFO 3 */#define TXUDRN0 0x10 /*TX_URUN, FIFO 0 */#define TXUDRN1 0x20 /*TX_URUN, FIFO 1 */#define TXUDRN2 0x40 /*TX_URUN, FIFO 2 */#define TXUDRN3 0x80 /*TX_URUN, FIFO 3 *//* RXEV, RXMSK bits ***************************************************/#define RXFIFO0 0x01 /*RX_DONE, FIFO 0 */#define RXFIFO1 0x02 /*RX_DONE, FIFO 1 */#define RXFIFO2 0x04 /*RX_DONE, FIFO 2 */#define RXFIFO3 0x08 /*RX_DONE, FIFO 3 */#define RXOVRN0 0x10 /*RX_OVRN, FIFO 0 */#define RXOVRN1 0x20 /*RX_OVRN, FIFO 1 */#define RXOVRN2 0x40 /*RX_OVRN, FIFO 2 */#define RXOVRN3 0x80 /*RX_OVRN, FIFO 3 *//* NAKEV, NAKMSK bits *************************************************/#define NAK_I0 0x01 /*IN NAK, FIFO 0 */#define NAK_I1 0x02 /*IN NAK, FIFO 1 */#define NAK_I2 0x04 /*IN NAK, FIFO 2 */#define NAK_I3 0x08 /*IN NAK, FIFO 3 */#define NAK_O0 0x10 /*OUT NAK, FIFO 0 */#define NAK_O1 0x20 /*OUT NAK, FIFO 1 */#define NAK_O2 0x40 /*OUT NAK, FIFO 2 */#define NAK_O3 0x80 /*OUT NAK, FIFO 3 *//* TXCx bits ********************************************************/#define TX_EN 0x01 /*transmit enable */#define TX_LAST 0x02 /*last data in FIFO */#define TX_TOGL 0x04 /*specifies PID used */#define FLUSH 0x08 /*flushes all FIFO data */#define IGN_IN 0x10 /*ignore in tokens *//* TXS0 bits ********************************************************/#define TX_DONE 0x20 /*transmit done */#define ACK_STAT 0x40 /*ack status of xmission *//* RXC0 bits ********************************************************/#define RX_EN 0x01 /*receive enable */#define IGN_OUT 0x02 /*ignore out tokens */#define IGN_SETUP 0x04 /*ignore setup tokens *//* RXS0 bits ********************************************************/#define RX_LAST 0x10 /*indicates RCOUNT valid */#define RX_TOGL 0x20 /*last pkt was DATA1 PID */#define SETUP_R 0x40 /*setup packet received */#define RX_ERR 0x80 /*last packet had an error*//* Some new 9603 bits *************************************************//* WKUP bits ********************************************************/#define PNDUSB 0x01 /* Pending USB WakeUp */#define PNDUC 0x02 /* Pending uC WakeUp */#define ENUSB 0x04 /* Enable USB */#define ENUC 0x08 /* Enable Microcontroller */#define WKMODE 0x20 /* Wake Up Mode */#define HOS 0x40 /* Halt On Suspend */#define FHT 0x80 /* Force Halt *//**********************************************************************//* 9602 commands and constants *//**********************************************************************/#define USBREAD 0x00 /*reads data at spec. addr*/#define USBWRITE 0x80 /*write selected register */#define USBBURST 0xC0 /*burst write *//* RCOUNT bits ********************************************************/#define RCOUNT 0x0F?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -