/*******************************************************************************
*                                                                            
*	Filename:	RA8803.h
* 
*   	Author:		Duke Chang
*   	Company:    	RAiO Technology Inc.
*	Case:
*	Device:		MXIC MX10E8050IQC at 18.432MHz
*   	Date:       	2005/10/1
*	Modifier:	Duke Chang
*	Modify Date:    2005/10/13
*   	Visions:   	1.0
*   	Compiled Using Keil C v7.50
*	
*******************************************************************************/

#include <stdio.h>
#include <intrins.h>
#include "MX10E8051I.h"
#include "RA8803Reg.h"
#include "UserDef.h"

//------------------------------------------------------------------------------
//Complier Defines
//------------------------------------------------------------------------------
//===== LCD Panel Size =====
#ifdef P320x240
#define cAWRR		39	
#define cAWBR		239     
#define cDWRR 		39      
#define cDWBR		239 	
#endif

//------------------------------------------------------------------------------
//Parameter Defines
//------------------------------------------------------------------------------
//===== MCU Interface =====
#ifdef Parallel
#define bRST		P2_0
//#define bINT		P3_3
#define bCSZ		P3_4
#define bWRZ		P3_6
#define bRDZ		P3_7
#define bRS		P3_3

#define DATA_BUS	P0

uchar volatile xdata CMD		_at_ 0xfeff;		//Command
uchar volatile xdata RAM		_at_ 0xffff;		//Display RAM
#endif

//------------------------------------------------------------------------------
//Subroutine Declare
//------------------------------------------------------------------------------
//RA8803 LCD Controller Function
void LCD_Reset(void);
void LCD_Initial(void);
void LCD_ON(void);
void LCD_OFF(void);
void LCD_Clear(void);
void LCD_GotoXY(uchar, uchar);
void LCD_BlkTim(uchar);

void LCD_Graphic(void);
void LCD_Text8x8(void);
void LCD_Text8x16(void);
void LCD_Text16x16(void);

void LCD_CmdWrite(uchar, uchar);
uchar LCD_CmdRead(uchar);
void LCD_DataWrite(uchar);
uchar LCD_DataRead(void);
void LCD_ChkBusy(void);

#ifdef Serial_3
void LCD_SendData(uchar buf);
uchar LCD_GetData(void);
#endif

#ifdef Serial_4A
void LCD_SendData(uchar buf);
uchar LCD_GetData(void);
#endif

#ifdef Serial_4B
void LCD_SendData_4B(uchar buf);
uchar LCD_GetData_4B(void);
#endif

void LCD_PrintStrD100ms(uchar *ptr, uchar x, uchar y, uchar time);

//Delay Function
extern void Delay2us(uchar);
extern void Delay100us(uchar);
extern void Delay1ms(uchar);
extern void Delay10ms(uchar);
extern void Delay100ms(uchar);

//------------------------------------------------------------------------------
//Const Declare
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//Variable Declare
//------------------------------------------------------------------------------