#include <REG89C51RD.H>
#include <absacc.h>
#include <intrins.h>
#include"zongxiangzimo.h"
#include"qgj.h"

void lcd_init();
void lcd_clear();
void WriteOneHZ(uint,uchar,uchar,uchar*);//光標指針地址低位,高位,字庫首地址
void WriteOneChar(uint PagSel,uchar CurHIGH,uchar CurLOW,uchar*ZiKu);/*在指定位置顯示1個字符*/
void MyDelay(uint);
void MoveCursor(uchar PagSel,uchar CurHIGH,uchar CurLOW,int State);//光棒產生函數
void MoveCursorFar(uchar PagSel,uchar CurHIGH,uchar CurLOW,uint State);//光棒消失函數
int i;
void main()
{
 lcd_init();
 lcd_clear();
W_COM =0x4f; /*光標地址自動向下增=*/
WriteOneHZ(1,2,0,QIE);/*切*/
WriteOneHZ(1,4,0,GE);/*割*/
WriteOneHZ(1,6,0,SU);/*速*/
WriteOneHZ(1,8,0,DU);/*度*/
WriteOneHZ(1,0X0A,0,MAO);/*：*/
WriteOneChar(1,0x0c,0,DIAN0);
WriteOneChar(1,0x0D,0,ZERO);
WriteOneChar(1,0x0E,0,ZERO);
WriteOneHZ(1,0,0x10,SHANG);/*上*/
WriteOneHZ(1,2,0x10,PO);/*坡*/
WriteOneHZ(1,4,0x10,KOU);/*口*/
WriteOneHZ(1,6,0x10,JIAO);/*角*/
WriteOneHZ(1,8,0x10,DU);/*度*/
WriteOneHZ(1,0X0A,0x10,MAO);/*:*/
WriteOneHZ(1,0,0x20,XIA);/*下*/
WriteOneHZ(1,2,0x20,PO);/*坡*/
WriteOneHZ(1,4,0x20,KOU);/*口*/
WriteOneHZ(1,6,0x20,JIAO);/*角*/
WriteOneHZ(1,8,0x20,DU);/*度*/
WriteOneHZ(1,0X0A,0x20,MAO);/*:*/
MoveCursor(2,2,0x00,-1);/*光棒產生反碼*/
//MoveCursor(2,2,0x00,5);
//MoveCursor1(2,0,0x20,6);
//MoveCursorFar(2,2,0x40,5);/*光棒消失原碼*/
//MoveCursor(2,0,0x20,6);
while(1);
}

/*WriteOneHZ(1,0,0,HA);
WriteOneHZ(1,2,0,ER);
WriteOneHZ(1,4,0,BIN);
WriteOneHZ(1,6,0,GONG);
WriteOneHZ(1,8,0,CHENG);
WriteOneHZ(1,0x0a,0,DA);
WriteOneHZ(1,0X0c,0,XUE);*/