?? lpc2294.h
字號:
/****************************************Copyright (c)**************************************************
** Guangzou ZLG-MCU Development Co.,LTD.
** graduate school
** http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name: LPC2294.h
** Last modified Date: 2004-09-17
** Last Version: 1.0
** Descriptions: Defines the special registers and firmware programs for
** lpc22xx\lpc212x\lpc211x\lpc210x
**
**------------------------------------------------------------------------------------------------------
** Created by: Chenmingji
** Created date: 2004-09-17
** Version: 1.0
** Descriptions: The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
/* EXTERNAL MEMORY CONTROLLER (EMC) */
/* 外部總線控制器 */
#define BCFG0 (*((volatile unsigned int *) 0xFFE00000)) /* lpc22xx only */
#define BCFG1 (*((volatile unsigned int *) 0xFFE00004)) /* lpc22xx only */
#define BCFG2 (*((volatile unsigned int *) 0xFFE00008)) /* lpc22xx only */
#define BCFG3 (*((volatile unsigned int *) 0xFFE0000C)) /* lpc22xx only */
/* External Interrupts */
/* 外部中斷控制寄存器 */
#define EXTINT (*((volatile unsigned char *) 0xE01FC140))
#define EXTWAKE (*((volatile unsigned char *) 0xE01FC144))
#define EXTMODE (*((volatile unsigned char *) 0xE01FC148)) /* Not used for lpc210x*/
#define EXTPOLAR (*((volatile unsigned char *) 0xE01FC14C)) /* Not used for lpc210x*/
/* SMemory mapping control. */
/* 內存remap控制寄存器 */
#define MEMMAP (*((volatile unsigned char *) 0xE01FC040))
/* Phase Locked Loop (PLL) */
/* PLL控制寄存器 */
#define PLLCON (*((volatile unsigned char *) 0xE01FC080))
#define PLLCFG (*((volatile unsigned char *) 0xE01FC084))
#define PLLSTAT (*((volatile unsigned short*) 0xE01FC088))
#define PLLFEED (*((volatile unsigned char *) 0xE01FC08C))
/* Power Control */
/* 功率控制寄存器 */
#define PCON (*((volatile unsigned char *) 0xE01FC0C0))
#define PCONP (*((volatile unsigned long *) 0xE01FC0C4))
/* VPB Divider */
/* VLSI外設總線（VPB）分頻寄存器 */
#define VPBDIV (*((volatile unsigned char *) 0xE01FC100))
/* Memory Accelerator Module (MAM) */
/* 存儲器加速模塊 */
#define MAMCR (*((volatile unsigned char *) 0xE01FC000))
/* Vectored Interrupt Controller (VIC) */
/* 向量中斷控制器(VIC)的特殊寄存器 */
#define VICIRQStatus (*((volatile unsigned long *) 0xFFFFF000))
#define VICFIQStatus (*((volatile unsigned long *) 0xFFFFF004))
#define VICRawIntr (*((volatile unsigned long *) 0xFFFFF008))
#define VICIntSelect (*((volatile unsigned long *) 0xFFFFF00C))
#define VICIntEnable (*((volatile unsigned long *) 0xFFFFF010))
#define VICIntEnClr (*((volatile unsigned long *) 0xFFFFF014))
#define VICSoftInt (*((volatile unsigned long *) 0xFFFFF018))
#define VICSoftIntClear (*((volatile unsigned long *) 0xFFFFF01C))
#define VICProtection (*((volatile unsigned long *) 0xFFFFF020))
#define VICVectAddr (*((volatile unsigned long *) 0xFFFFF030))
#define VICDefVectAddr (*((volatile unsigned long *) 0xFFFFF034))
#define VICVectAddr0 (*((volatile unsigned long *) 0xFFFFF100))
#define VICVectAddr1 (*((volatile unsigned long *) 0xFFFFF104))
#define VICVectAddr2 (*((volatile unsigned long *) 0xFFFFF108))
#define VICVectAddr3 (*((volatile unsigned long *) 0xFFFFF10C))
#define VICVectAddr4 (*((volatile unsigned long *) 0xFFFFF110))
#define VICVectAddr5 (*((volatile unsigned long *) 0xFFFFF114))
#define VICVectAddr6 (*((volatile unsigned long *) 0xFFFFF118))
#define VICVectAddr7 (*((volatile unsigned long *) 0xFFFFF11C))
#define VICVectAddr8 (*((volatile unsigned long *) 0xFFFFF120))
#define VICVectAddr9 (*((volatile unsigned long *) 0xFFFFF124))
#define VICVectAddr10 (*((volatile unsigned long *) 0xFFFFF128))
#define VICVectAddr11 (*((volatile unsigned long *) 0xFFFFF12C))
#define VICVectAddr12 (*((volatile unsigned long *) 0xFFFFF130))
#define VICVectAddr13 (*((volatile unsigned long *) 0xFFFFF134))
#define VICVectAddr14 (*((volatile unsigned long *) 0xFFFFF138))
#define VICVectAddr15 (*((volatile unsigned long *) 0xFFFFF13C))
#define VICVectCntl0 (*((volatile unsigned long *) 0xFFFFF200))
#define VICVectCntl1 (*((volatile unsigned long *) 0xFFFFF204))
#define VICVectCntl2 (*((volatile unsigned long *) 0xFFFFF208))
#define VICVectCntl3 (*((volatile unsigned long *) 0xFFFFF20C))
#define VICVectCntl4 (*((volatile unsigned long *) 0xFFFFF210))
#define VICVectCntl5 (*((volatile unsigned long *) 0xFFFFF214))
#define VICVectCntl6 (*((volatile unsigned long *) 0xFFFFF218))
#define VICVectCntl7 (*((volatile unsigned long *) 0xFFFFF21C))
#define VICVectCntl8 (*((volatile unsigned long *) 0xFFFFF220))
#define VICVectCntl9 (*((volatile unsigned long *) 0xFFFFF224))
#define VICVectCntl10 (*((volatile unsigned long *) 0xFFFFF228))
#define VICVectCntl11 (*((volatile unsigned long *) 0xFFFFF22C))
#define VICVectCntl12 (*((volatile unsigned long *) 0xFFFFF230))
#define VICVectCntl13 (*((volatile unsigned long *) 0xFFFFF234))
#define VICVectCntl14 (*((volatile unsigned long *) 0xFFFFF238))
#define VICVectCntl15 (*((volatile unsigned long *) 0xFFFFF23C))
/* Pin Connect Block */
/* 管腳連接模塊控制寄存器 */
#define PINSEL0 (*((volatile unsigned long *) 0xE002C000))
#define PINSEL1 (*((volatile unsigned long *) 0xE002C004))
#define PINSEL2 (*((volatile unsigned long *) 0xE002C014)) /* Not used for lpc210x*/
/* General Purpose Input/Output (GPIO) */
/* 通用并行IO口的特殊寄存器 */
#define IOPIN (*((volatile unsigned long *) 0xE0028000)) /* lpc210x only */
#define IOSET (*((volatile unsigned long *) 0xE0028004)) /* lpc210x only */
#define IODIR (*((volatile unsigned long *) 0xE0028008)) /* lpc210x only */
#define IOCLR (*((volatile unsigned long *) 0xE002800C)) /* lpc210x only */
#define IO0PIN (*((volatile unsigned long *) 0xE0028000)) /* Not used for lpc210x*/
#define IO0SET (*((volatile unsigned long *) 0xE0028004)) /* Not used for lpc210x*/
#define IO0DIR (*((volatile unsigned long *) 0xE0028008)) /* Not used for lpc210x*/
#define IO0CLR (*((volatile unsigned long *) 0xE002800C)) /* Not used for lpc210x*/
#define IO1PIN (*((volatile unsigned long *) 0xE0028010)) /* Not used for lpc210x*/
#define IO1SET (*((volatile unsigned long *) 0xE0028014)) /* Not used for lpc210x*/
#define IO1DIR (*((volatile unsigned long *) 0xE0028018)) /* Not used for lpc210x*/
#define IO1CLR (*((volatile unsigned long *) 0xE002801C)) /* Not used for lpc210x*/
#define IO2PIN (*((volatile unsigned long *) 0xE0028020)) /* lpc22xx only */
#define IO2SET (*((volatile unsigned long *) 0xE0028024)) /* lpc22xx only */
#define IO2DIR (*((volatile unsigned long *) 0xE0028028)) /* lpc22xx only */
#define IO2CLR (*((volatile unsigned long *) 0xE002802C)) /* lpc22xx only */
#define IO3PIN (*((volatile unsigned long *) 0xE0028030)) /* lpc22xx only */
#define IO3SET (*((volatile unsigned long *) 0xE0028034)) /* lpc22xx only */
#define IO3DIR (*((volatile unsigned long *) 0xE0028038)) /* lpc22xx only */
#define IO3CLR (*((volatile unsigned long *) 0xE002803C)) /* lpc22xx only */
/* Universal Asynchronous Receiver Transmitter 0 (UART0) */
/* 通用異步串行口0(UART0)的特殊寄存器 */
#define U0RBR (*((volatile unsigned char *) 0xE000C000))
#define U0THR (*((volatile unsigned char *) 0xE000C000))
#define U0IER (*((volatile unsigned char *) 0xE000C004))
#define U0IIR (*((volatile unsigned char *) 0xE000C008))
#define U0FCR (*((volatile unsigned char *) 0xE000C008))
#define U0LCR (*((volatile unsigned char *) 0xE000C00C))
#define U0LSR (*((volatile unsigned char *) 0xE000C014))
#define U0SCR (*((volatile unsigned char *) 0xE000C01C))
#define U0DLL (*((volatile unsigned char *) 0xE000C000))
#define U0DLM (*((volatile unsigned char *) 0xE000C004))
/* Universal Asynchronous Receiver Transmitter 1 (UART1) */
/* 通用異步串行口1(UART1)的特殊寄存器 */
#define U1RBR (*((volatile unsigned char *) 0xE0010000))
#define U1THR (*((volatile unsigned char *) 0xE0010000))
#define U1IER (*((volatile unsigned char *) 0xE0010004))
#define U1IIR (*((volatile unsigned char *) 0xE0010008))
#define U1FCR (*((volatile unsigned char *) 0xE0010008))
#define U1LCR (*((volatile unsigned char *) 0xE001000C))
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -