?? 0832.lst
字號:
C51 COMPILER V6.12 0832 01/07/2007 20:18:14 PAGE 1
C51 COMPILER V6.12, COMPILATION OF MODULE 0832
OBJECT MODULE PLACED IN .\0832.OBJ
COMPILER INVOKED BY: G:\單片機學習\單片機軟件\keil\C51\BIN\C51.EXE .\0832.c BROWSE DEBUG OBJECTEXTEND
stmt level source
1 #include <intrins.h>
2 #include <reg51.h>
3 #include <stdio.h>
4
5 #define ulong unsigned long
6 #define uint unsigned int
7 #define uchar unsigned char
8 uchar k,i,j;
9 float l;
10 sbit sw=P3^0; //159選通開關
11 sbit ADCS =P3^1; //ADC0832 chip seclect
12 sbit ADDI =P3^3; //ADC0832 k in
13 sbit ADDO =P3^3; //ADC0832 k out
14 sbit ADCLK =P3^2; //ADC0832 clock signal
15
16 uchar dsw[20]; //存放sprintf轉換字符
17 uchar idata value[149]; //點陣字符儲存
18 uchar code table[]={ //字符查表
19 0x00,0x00,0x00,0x30,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*".",0*/
20
21 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
22
23 0x00,0x00,0xE0,0x0F,0x10,0x10,0x08,0x20,0x08,0x20,0x10,0x10,0xE0,0x0F,0x00,0x00,/*"0",1*/
24
25 0x00,0x00,0x10,0x20,0x10,0x20,0xF8,0x3F,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,/*"1",2*/
26
27 0x00,0x00,0x70,0x30,0x08,0x28,0x08,0x24,0x08,0x22,0x88,0x21,0x70,0x30,0x00,0x00,/*"2",3*/
28
29 0x00,0x00,0x30,0x18,0x08,0x20,0x88,0x20,0x88,0x20,0x48,0x11,0x30,0x0E,0x00,0x00,/*"3",4*/
30
31 0x00,0x00,0x00,0x07,0xC0,0x04,0x20,0x24,0x10,0x24,0xF8,0x3F,0x00,0x24,0x00,0x00,/*"4",5*/
32
33 0x00,0x00,0xF8,0x19,0x08,0x21,0x88,0x20,0x88,0x20,0x08,0x11,0x08,0x0E,0x00,0x00,/*"5",6*/
34
35 0x00,0x00,0xE0,0x0F,0x10,0x11,0x88,0x20,0x88,0x20,0x18,0x11,0x00,0x0E,0x00,0x00,/*"6",7*/
36
37 0x00,0x00,0x38,0x00,0x08,0x00,0x08,0x3F,0xC8,0x00,0x38,0x00,0x08,0x00,0x00,0x00,/*"7",8*/
38
39 0x00,0x00,0x70,0x1C,0x88,0x22,0x08,0x21,0x08,0x21,0x88,0x22,0x70,0x1C,0x00,0x00,/*"8",9*/
40
41 0x00,0x00,0xE0,0x00,0x10,0x31,0x08,0x22,0x08,0x22,0x10,0x11,0xE0,0x0F,0x00,0x00,/*"9",10*/
42
43 0x08,0x00,0x78,0x00,0x88,0x07,0x00,0x38,0x00,0x0E,0xC8,0x01,0x38,0x00,0x08,0x00,/*"V",11*/
44 };
45
46
47 void delay(int c) //延時，C不能小于5
48 {
49 1 int i,j;
50 1 for(i=0;i<c;i++)
51 1 for(j=0;j<10;j++)
52 1 ;
53 1 }
54 /************
55 讀ADC0832函數
C51 COMPILER V6.12 0832 01/07/2007 20:18:14 PAGE 2
56 ************/
57
58 //采集并返回
59 unsigned int Adc0832(unsigned char channel) //AD轉換，返回結果
60 {
61 1 uchar i=0;
62 1 uchar j;
63 1 uint dat=0;
64 1 uchar ndat=0;
65 1
66 1 if(channel==0)channel=2;
67 1 if(channel==1)channel=3;
68 1 ADDI=1;
69 1 _nop_();
70 1 _nop_();
71 1 ADCS=0;//拉低CS端
72 1 _nop_();
73 1 _nop_();
74 1 ADCLK=1;//拉高CLK端
75 1 _nop_();
76 1 _nop_();
77 1 ADCLK=0;//拉低CLK端,形成下降沿1
78 1 _nop_();
79 1 _nop_();
80 1 ADCLK=1;//拉高CLK端
81 1 ADDI=channel&0x1;
82 1 _nop_();
83 1 _nop_();
84 1 ADCLK=0;//拉低CLK端,形成下降沿2
85 1 _nop_();
86 1 _nop_();
87 1 ADCLK=1;//拉高CLK端
88 1 ADDI=(channel>>1)&0x1;
89 1 _nop_();
90 1 _nop_();
91 1 ADCLK=0;//拉低CLK端,形成下降沿3
92 1 ADDI=1;//控制命令結束
93 1 _nop_();
94 1 _nop_();
95 1 dat=0;
96 1 for(i=0;i<8;i++)
97 1 {
98 2 dat|=ADDO;//收數據
99 2 ADCLK=1;
100 2 _nop_();
101 2 _nop_();
102 2 ADCLK=0;//形成一次時鐘脈沖
103 2 _nop_();
104 2 _nop_();
105 2 dat<<=1;
106 2 if(i==7)dat|=ADDO;
107 2 }
108 1 for(i=0;i<8;i++)
109 1 {
110 2 j=0;
111 2 j=j|ADDO;//收數據
112 2 ADCLK=1;
113 2 _nop_();
114 2 _nop_();
115 2 ADCLK=0;//形成一次時鐘脈沖
116 2 _nop_();
117 2 _nop_();
C51 COMPILER V6.12 0832 01/07/2007 20:18:14 PAGE 3
118 2 j=j<<7;
119 2 ndat=ndat|j;
120 2 if(i<7)ndat>>=1;
121 2 }
122 1 ADCS=1;//拉低CS端
123 1 ADCLK=0;//拉低CLK端
124 1 ADDO=1;//拉高數據端,回到初始狀態
125 1 dat<<=8;
126 1 dat|=ndat;
127 1 return(dat); //return ad k
128 1 }
129 /*************************************************
130 點陣字符采集函數
131 **************************************************/
132
133 void tra(uchar *p) //數組dsp[]里面的字符查詢后，再儲儲存到另一個顯示數組value[]
134 { for(i=0;i<5;i++)
135 1 {
136 2 if(i<4) //i=2時查的是句號，其他3個是電壓值
137 2 {
138 3 for(j=0;j<16;j++)
139 3 {
140 4 value[(i+1)*16+j]=table[(*p-0x2e)*16+j];
141 4 }
142 3 }
143 2 else
144 2 { for(j=0;j<16;j++) //電壓符號V
145 3 value[(i+1)*16+j]=table[12*16+j];
146 3 }
147 2
148 2 p++;
149 2 }
150 1 for(i=0;i<16;i++) //前16個和后21個消隱作用，不顯示
151 1 value[i]=0;
152 1 for(i=128;i<149;i++)
153 1 value[i]=0;
154 1 }
155
156
157 void main()
158 {
159 1
160 1 unsigned int b=0,i,j;
161 1 unsigned char a;
162 1
163 1
164 1
165 1 while(1)
166 1 {
167 2 k=Adc0832(0); //AD轉換結果
168 2 l=k/255.0*5.0;
169 2 sprintf(dsw,"%2.3f",l); //電壓值轉換成字符方式儲存，不明白的人上百度查一下sprintf函數的運用就清楚的，
-俺也是查的
170 2 tra(dsw);
171 2 j=0;
172 2 if(a>2) //移動間隔時間；越大移動越慢
173 2 {
174 3 a=0;
175 3 b+=2;
176 3 if(b>=85) //顯示到最后一個字，回頭顯示
177 3 {
178 4 b=0;
C51 COMPILER V6.12 0832 01/07/2007 20:18:14 PAGE 4
179 4 }
180 3 }
181 2 sw=1; //顯示字符，順序是從左掃到右，有16列，數據電平是從左1到左16，由低到高
182 2 for(i=0;i<16;i++) //sw是154選通開關。
183 2 {
184 3 P1=i;
185 3 P0=value[j+b];
186 3 P2=value[j+b+1];
187 3 delay(5);
188 3 P0=0x00;
189 3 P2=0x00;
190 3 j+=2;
191 3 }
192 2 sw=0;
193 2 for(i=0;i<16;i++)
194 2 {
195 3 P1=i;
196 3 P0=value[j+b];
197 3 P2=value[j+b+1];
198 3 delay(5);
199 3 P0=0x00;
200 3 P2=0x00;
201 3 j+=2;
202 3 }
203 2 a++;
204 2
205 2 }
206 1 }
207
MODULE INFORMATION: STATIC OVERLAYABLE
CODE SIZE = 593 ----
CONSTANT SIZE = 214 ----
XDATA SIZE = ---- ----
PDATA SIZE = ---- ----
DATA SIZE = 27 10
IDATA SIZE = 149 ----
BIT SIZE = ---- ----
END OF MODULE INFORMATION.
C51 COMPILATION COMPLETE. 0 WARNING(S), 0 ERROR(S)
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -