?? servo.c
字號:
// Return : TRUE/FALSE
// Side Effect :
// ***********************************************************************
BIT SERVO_Monitor()
{
WORD wTmp ;
//LJY0.87, defined it to enable reading data by way of 16x4 sectors.
#define DIVIDE_SECTOR
//LJY1.24, fix pause->play CDDA audio break when pause time exceed TIME_CHECK_STOP
#ifdef SUPPORT_CHECK_SERVO_STOP
static DWORD _dwLastDMATime = 0 ;
#endif
Service_420 () ;
if (!__bServoAutoCtrl)
return TRUE ;
if (gbServoRunning)
{
//TCC021, must add 1 to include the last sector
wTmp = (WORD) MIN(_bDMASector, (gdwEndLBA - gdwNextLBA + 1));
_bSendSector = (BYTE)wTmp;
//TCC023, if no data to transfer
if (wTmp < 1)
return TRUE ;
//LJY1.05, no need to do AV buffer control for NV data.
if (__bModePlay != MODE_PLAYCDROM)
{
// TCC037, if wTmp==1, it might be NV sector, don't do buffer control
if (bThreshold && wTmp != 1)
{
// TCC019, control video and audio buffer
if (__wDiscType & BOOK_DVD)
{
W99AV_ReadInfo (W99AV_INFO_VIDEO_REMAIN, &_dwSERVOTmp) ;
//LJY1.21, LJY1.11, reference __dwVOBuffer instead of _dwVBThreshold.
#ifdef SUPPORT_ANTISHOCK
if (_dwSERVOTmp > __dwVOBuffer)
{
#else
if (_dwSERVOTmp > _dwVBThreshold)
{
#endif
return TRUE;
}
}
else
{
//LJY1.10, for DVD JPEG&MP3
if (__bModePlay == MODE_PLAYAUDIO)
{
// CDDA title, or DVD MP3
W99AV_ReadInfo (W99AV_INFO_AUDIO_REMAIN, &_dwSERVOTmp) ;
// TCC274, don't check buffer empty but check buffer remainder.
// So that we can increase audio buffer w/o modify code.
// 15 sectors torelence time is 15/75=200ms.
if (_dwSERVOTmp < __dwW99AVABUFFSIZE/2)
{
//Kevin0.91, read more data instead of 1/2 audio buffer size when audio buffer remainder is less than 1/2 of buffer size
//wTmp = __dwW99AVABUFFSIZE/2/588 ;
//Kevin1.05, avoid the CDDA broken noise by preventing overflow since PCM audio buffer has been enlarged to 40K DW
///wTmp = (__dwW99AVABUFFSIZE-_dwSERVOTmp)/588 ;
//LJY1.22, LJY1.11b, use SECTOR_607, SECTOR_784 instead of 607 and 784
if(__bCDDA_DTS & CDDA_BITSTREAM_PURE)
{
wTmp = __dwW99AVABUFFSIZE/3/SECTOR_CDDA ; //LJY1.23, use SECTOR_CDDA instead of 588 or 784
}
//LJY1.24, use NO_CDG to determine whether CDG is supported.
#ifndef NO_CDG
else if(__bCDDA_DTS & CDDA_BITSTREAM_CDG)
{
wTmp = __dwW99AVABUFFSIZE/3/SECTOR_784 ; //with subcode
}
#endif
else
{
wTmp = __dwW99AVABUFFSIZE/3/SECTOR_588 ; //without subcode
}
}
else
return TRUE ;
}
else
{
//DVD JPEG
W99AV_ReadInfo (W99AV_INFO_VIDEO_REMAIN, &_dwSERVOTmp) ;
if (_dwSERVOTmp < __dwW99AVVBUFFSIZE/2)
wTmp = __dwW99AVVBUFFSIZE/3/SECTOR_512; //(2048/4=512)//LJY1.22, LJY1.11b, use SECTOR_512 instead of 512
else
return TRUE ;
}
if (gdwNextLBA+wTmp>gdwEndLBA)
{
wTmp = gdwEndLBA - gdwNextLBA ;
}
}
}
}
//LJY2.79 ** TCH2.79; begin...
#ifdef SUPPORT_CHECK_SERVO_STOP
{
if (UTL_GetSysTimer() - _dwLastDMATime > TIME_CHECK_STOP) // Over 5 minutes
{
// wyc.172, because DVS loader will have problem in Start Up command, so use seek command to replace it and not do
// power mode checking.
SERVO_Seek (gdwNextLBA,TRUE);
}
_dwLastDMATime = UTL_GetSysTimer() ;
}
#endif // ** TCH2.79; end...
// LJY0.87, not for CDDA
#ifdef DIVIDE_SECTOR
//LJY0.87a, don't do buffer control for NV sector
if((__wDiscType & BOOK_DVD) && (wTmp != 1))
// if (__wDiscType & BOOK_DVD)
{
W99AV_ReadInfo (W99AV_INFO_AUDIO_REMAIN, &_dwTitleKey[0]) ;
// LJY2.32, share same flow for both SCF/SCB and other play mode.
/*
if ((_dwTitleKey[0] < 2000) || (__bModeCmd == KEY_SCF)|| (__bModeCmd == KEY_SCB))
{
_bOneTimeSec = _bDMASector;
_bDMALoop = 1;
#ifdef _DUMP_INFO // ** TCH0.95;
printf ( "special [%d]", _bOneTimeSec );
#endif // _DUMP_INFO
}
else
*/
{
_bOneTimeSec = 16; //438MHz: OK
//Kevin2.33-2, fix Dolby Test DVD TT/CC=30/1 broken noise (DSP performance issue. PCM output repeats for a while)
// Decrease SERVO read sectors each time _bOneTimeSec=4 (Burst data into ACFIFO interrupts DSP. Smaller burst size=> less interrups during the same period)
if(__bAudioType==HAL_AUDIO_AC3)
{
W99AV_ReadDRAMData ( W99AV_DRAM_LOGO_START, & _dwSERVOCnt1 );
if ( ( HIWORD(_dwSERVOCnt1) == 0x1 ) && (_dwSERVOTmp <= 0x30) ) //still mode
{
_bOneTimeSec = 4; //399MHz 16:X 8:OK; 360MHz 8:X 16:X 4: OK, but may cause A/V unsmooth (A underflow)
}
}
_bDMALoop = _bDMASector / _bOneTimeSec;
// Chuan1.00-2, Check Audio Buffer overflow for all case.
//if ((_dwTitleKey[0] > _dwABThreshold) && (__bAudioType != HAL_AUDIO_LPCM))
//LJY1.21, LJY1.11, reference __dwAOBuffer instead of _dwABThreshold.
#ifdef SUPPORT_ANTISHOCK
if (_dwTitleKey[0] > __dwAOBuffer)
#else
if (_dwTitleKey[0] > _dwABThreshold)
#endif
return TRUE;
//Kevin2.33-2, comment
/*
if ((__bAudioType != HAL_AUDIO_LPCM) && (_dwSERVOTmp <= 0x30))
{
if ( _bSendSector > 10 ) // ** TCH0.91; Add it, other _bSendSector is modified. Fix the bug: Audio of Dolby AC3 title is broken
_bSendSector = 10;
// ** TCH0.91; _bOneTimeSec = 10;
}
// ** TCH0.91; else
// ** TCH0.91; _bOneTimeSec = 16;
*/
}
// Read data by several times
for (_bDMATimes =0; _bDMATimes <_bDMALoop; _bDMATimes++)
{
if (_bSendSector > _bOneTimeSec)
wTmp = (WORD)_bOneTimeSec;
else
wTmp = (WORD)_bSendSector;
if (SERVO_ReadData(gdwNextLBA, wTmp) == TRUE)
{
}
#if defined(SUPPORT_PRINTF) || defined(SERIAL_DEBUG)
else
{
printf("\n ReadData[%ld]~[%ld]failed", gdwNextLBA, gdwNextLBA+wTmp);
}
#endif
#ifdef _DUMP_INFO // ** TCH0.95;
{
printf ( "[%ld-%ld]", gdwNextLBA, gdwNextLBA+ wTmp- 1 );
_bSRV_Debug++;
if ( ! (_bSRV_Debug% 4 ) )
printf ( "\n" );
}
#endif // _DUMP_INFO
//LJY1.21, to speed up IR key response for OPEN/CLOSE/NEXT/PREV
if(UTL_QueryCapability(QUERY_ABORT_SERVO))
{
gbServoRunning = FALSE;
return FALSE ;
}
// ** TCH0.91; begin...
_bSendSector-= wTmp;
gdwNextLBA += wTmp;
if ( ! _bSendSector )
{
break;
}
W99AV_ReadInfo (W99AV_INFO_VIDEO_REMAIN, &_dwSERVOTmp) ;
W99AV_ReadInfo (W99AV_INFO_AUDIO_REMAIN, &_dwSERVOCnt2) ;
// wyc.170, add video underflow control for some cases video will underflow. When still mode we don't check video underflow status.
W99AV_ReadDRAMData ( W99AV_DRAM_LOGO_START, & _dwSERVOCnt1 );
//LJY1.21, LJY1.07e
#ifdef SUPPORT_ANTISHOCK
if (((_dwSERVOTmp >= __dwVOBuffer) && (_dwSERVOCnt2 >=1000)) || ((_dwSERVOCnt2 >= __dwAOBuffer) && ((_dwSERVOTmp >= 1000) || (HIWORD(_dwSERVOCnt1) == 0x1))) )
#else
// if (((_dwSERVOTmp >= _dwVBThreshold) && (_dwSERVOCnt2 >=1000)) || ((_dwSERVOCnt2 >= _dwABThreshold) && ((_dwSERVOTmp >= 1000) || (HIWORD(_dwSERVOCnt1) == 0x1))) )
//LJY2.32, only reference VRem for video overflow checking.
if ((_dwSERVOTmp >= _dwVBThreshold) || ((_dwSERVOCnt2 >= _dwABThreshold) && ((_dwSERVOTmp >= 1000) || (HIWORD(_dwSERVOCnt1) == 0x1))) )
#endif
{
break;
}
}
}
else
{
if (SERVO_ReadData(gdwNextLBA, wTmp) == TRUE)
{
//LJY1.23, LJY1.11b-2, don't update gdwNextLBA for CDDA otherwise OSD time would be updated when no bitstream input.
#ifdef SUPPORT_ANTISHOCK
if(__bAttrPlay == ATTR_CDDA)
gdwNextLBA += wTmp;
#endif
}
else
{
#if defined(SUPPORT_PRINTF) || defined(SERIAL_DEBUG)
printf("\n ReadData[%ld]~[%ld] failed", gdwNextLBA, gdwEndLBA);
#endif
#ifdef SUPPORT_ANTISHOCK
//Kevin2.37, fix CDDA L/R swap when beating the player
if(__bAttrPlay == ATTR_CDDA)
{
if (_bSERVOPLLUnlock)
{
W99AV_Reset(W99AV_RESET_CDIF);
HAL_Reset(HAL_RESET_PARSER);
HAL_ControlParser(HAL_PARSER_ENABLE, (BYTE)NULL );
_bSERVOPLLUnlock = FALSE;
}
}
#endif
}
//LJY1.23, LJY1.11b-2, don't update gdwNextLBA for CDDA otherwise OSD time would be updated when no bitstream input.
#ifdef SUPPORT_ANTISHOCK
if(__bAttrPlay != ATTR_CDDA)
#endif
gdwNextLBA += wTmp;
}
#else // #else of DIVIDE_SECTOR
if (SERVO_ReadData(gdwNextLBA, wTmp) == TRUE)
{
}
#if defined(SUPPORT_PRINTF) || defined(SERIAL_DEBUG)
else
printf("\n ReadData[%ld]~[%ld] failed", gdwNextLBA, gdwEndLBA);
#endif
gdwNextLBA += wTmp;
#endif // DIVIDE_SECTOR
if ((wTmp == 0) || (SERVO_CheckDiscEnding()))
{
gbServoRunning = FALSE;
}
}
//LJY1.24, not perform servo seek in SERVO_Monitor() for pause to fix pause->play CDDA audio break when pause time exceed TIME_CHECK_STOP.
// The audio buffer may be empty if performed servo seek and the audio break may be occur.
#ifdef SUPPORT_CHECK_SERVO_STOP
else
{
if(__btPause)
_dwLastDMATime = UTL_GetSysTimer() ;
}
#endif
return TRUE ;
}
// ***********************************************************************
// Function : SERVO_CheckDiscEnding
// Description : Used to check if play end
// Arguments : None
// Return : TRUE/FALSE
// Side Effect :
// ***********************************************************************
BIT SERVO_CheckDiscEnding()
{
if (gdwNextLBA > gdwEndLBA)
return TRUE;
else
return FALSE;
}
// ***********************************************************************
// Function : SERVO_ReadData
// Description : Used to read data from ude
// 1. Send command according to the disc type
// 2. Check if transfer complete
// Arguments : dwStartLBA : The starting sector number to read
// wSectorNum : number of sectors to read
// Return : TRUE/FALSE
// Side Effect :
// ***********************************************************************
BIT SERVO_ReadData(DWORD dwStartLBA, WORD wSectorNum)
{
_dwSERVOTmp = dwStartLBA + ((DWORD) wSectorNum) - 1;
// UDE_ClearPacket () ; //LJY2.31, remove UDE_ClearPacket
if (_bSERVODiscType == DISC_TYPE_DVD)
{
aPacket[0] = 9; // command paramater length is 9
aPacket[1] = UDE_COMMAND_READDVD; // UDE : Read_DVD command
aPacket[2] = HIBYTE(HIWORD(dwStartLBA));
aPacket[3] = LOBYTE(HIWORD(dwStartLBA));
aPacket[4] = HIBYTE(LOWORD(dwStartLBA));
aPacket[5] = LOBYTE(LOWORD(dwStartLBA));
aPacket[6] = HIBYTE(HIWORD(_dwSERVOTmp));
aPacket[7] = LOBYTE(HIWORD(_dwSERVOTmp));
aPacket[8] = HIBYTE(LOWORD(_dwSERVOTmp));
aPacket[9] = LOBYTE(LOWORD(_dwSERVOTmp));
//LJY277, to distinguish CDROM data, NVPAck or AV data
aPacket[10] = ((wSectorNum==1)||(__bModePlay==MODE_PLAYCDROM)) ? 0x01 : 0x00; // Data Type
}
else // for non-DVD type, all use cd type if (_bSERVODiscType == DISC_TYPE_VCD)
{
aPacket[0] = 7; // command paramater length is 7
aPacket[1] = UDE_COMMAND_READCD; // UDE : Read_CD command
//_HSGtoMSF(dwStartLBA);
_dwSERVOCnt1 = COMUTL_HSGtoMSF (dwStartLBA) ?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -