?? microcontroller.h
字號:
//Microcontroller Microcontroller.h // Rev 9/1/05
//Copyright (C) 2005 Alex Brown rbirac@cox.net
//This program is free software; See license at the end of this file for details.
/* NOTES for MC9S12DP256:
COP appears to initialize disabled at reset
The boot flash appears to be protected automatically at reset
For execution in RAM from Dbug, DATA = 1000, Prog = 1200, Stack = 3C00
For execution in EEPROM from JmpEE, DATA = 1000, Prog = 0400, Stack = 4000
For execution in Flash from reset, DATA = 1000, Prog = 4000, Stack = 4000
Set up for 9600 baud rate and a 61 hz real time interrupt
vectors256.c must be part of the project and modified as attached
to enable the interrupts.
Revise the include file "hcs12dp256.h" as follows to agree with Motorola
documentation:
#define PWMPRCLK _P(0xA3) //was PWMPRCLC, changed to agree with docs
for Microcontroller, the Long Printf version is required
*/
#include <hcs12dp256.h> //for registers
#include <stdio.h> //for i/o prototypes
//CONSTANTS
#define USBtimeoutLimit 61
#define USBtimeoutOK 12
// OPEN SOURCE SOFTWARE LICENSE
/* Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -