NAMES 
END 

SEGMENTS /* here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. */
  ZEROPAGE_RAM      = READ_WRITE 0x0080 TO 0x00FF;
  RAM               = READ_WRITE 0x0100 TO 0x01FF;
  ROM               = READ_ONLY  0xBA00 TO 0xF9CD;
  BOOTLOADER_STATE  = READ_ONLY  0xF9CE TO 0xF9CF;  /* 2 bytes */
  SECONDARY_VECTORS = READ_ONLY  0xF9D0 TO 0xF9FF;  /* 3 x 16 bytes, JMP instructions */
  BOOTLOADER        = READ_ONLY  0xFFD0 TO 0xFFDF;
  PRIMARY_VECTORS   = READ_ONLY  0xFFE0 TO 0xFFFF;  /* 2 x 16 bytes, addresses only */ 
END

PLACEMENT /* here all predefined and user segments are placed into the SEGMENTS defined above. */
  DEFAULT_ROM                   INTO ROM;
  DEFAULT_RAM                   INTO RAM;
  Z_RAM                         INTO ZEROPAGE_RAM;
  PRIMARY_VECTORS_SEG     			INTO PRIMARY_VECTORS;
  SECONDARY_VECTORS_SEG         INTO SECONDARY_VECTORS;
  BOOTLOADER_SEG                INTO BOOTLOADER;
  BOOTLOADER_STATE_SEG          INTO BOOTLOADER_STATE;

END

STACKSIZE 0x60

ENTRIES /* keep the following unreferenced variables */
  primary_vectors
END