--lpm_counter DEVICE_FAMILY="Cyclone" lpm_modulus=0 lpm_width=10 aclr clk_en(vcc) clock cnt_en q sclr
--VERSION_BEGIN 4.1 cbx_cycloneii 2004:05:18:11:27:16:SJ cbx_lpm_add_sub 2004:06:23:12:24:04:SJ cbx_lpm_compare 2004:04:12:17:30:12:SJ cbx_lpm_counter 2004:04:21:01:21:20:SJ cbx_lpm_decode 2004:03:10:10:44:06:SJ cbx_mgl 2004:06:17:17:30:06:SJ cbx_stratix 2004:04:28:15:20:14:SJ cbx_stratixii 2004:05:18:11:28:28:SJ  VERSION_END


--  Copyright (C) 1988-2002 Altera Corporation
--  Any  megafunction  design,  and related netlist (encrypted  or  decrypted),
--  support information,  device programming or simulation file,  and any other
--  associated  documentation or information  provided by  Altera  or a partner
--  under  Altera's   Megafunction   Partnership   Program  may  be  used  only
--  to program  PLD  devices (but not masked  PLD  devices) from  Altera.   Any
--  other  use  of such  megafunction  design,  netlist,  support  information,
--  device programming or simulation file,  or any other  related documentation
--  or information  is prohibited  for  any  other purpose,  including, but not
--  limited to  modification,  reverse engineering,  de-compiling, or use  with
--  any other  silicon devices,  unless such use is  explicitly  licensed under
--  a separate agreement with  Altera  or a megafunction partner.  Title to the
--  intellectual property,  including patents,  copyrights,  trademarks,  trade
--  secrets,  or maskworks,  embodied in any such megafunction design, netlist,
--  support  information,  device programming or simulation file,  or any other
--  related documentation or information provided by  Altera  or a megafunction
--  partner, remains with Altera, the megafunction partner, or their respective
--  licensors. No other licenses, including any licenses needed under any third
--  party's intellectual property, are provided herein.


FUNCTION cyclone_lcell (aclr, aload, cin, clk, dataa, datab, datac, datad, ena, inverta, regcascin, sclr, sload)
WITH ( 	cin_used,	lut_mask,	operation_mode,	output_mode,	register_cascade_mode,	sum_lutc_input,	synch_mode) 
RETURNS ( combout, cout, regout);

--synthesis_resources = lut 10 
SUBDESIGN cntr_e29
( 
	aclr	:	input;
	clk_en	:	input;
	clock	:	input;
	cnt_en	:	input;
	cout	:	output;
	q[9..0]	:	output;
	sclr	:	input;
) 
VARIABLE 
	counter_cella0 : cyclone_lcell
		WITH (
			cin_used = "false",
			lut_mask = "66AA",
			operation_mode = "arithmetic",
			synch_mode = "on"
		);
	counter_cella1 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella2 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella3 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella4 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella5 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella6 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella7 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella8 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	counter_cella9 : cyclone_lcell
		WITH (
			cin_used = "true",
			lut_mask = "6AA0",
			operation_mode = "arithmetic",
			sum_lutc_input = "cin",
			synch_mode = "on"
		);
	a_val[9..0]	: WIRE;
	aclr_actual	: WIRE;
	aset_node	: WIRE;
	data[9..0]	: NODE;
	s_val[9..0]	: WIRE;
	safe_q[9..0]	: WIRE;
	sload	: NODE;
	sset	: NODE;
	sset_node	: WIRE;
	time_to_clear	: WIRE;
	updownDir	: WIRE;

BEGIN 
	counter_cella[9..0].aclr = aclr_actual;
	counter_cella[9..0].aload = B"0000000000";
	counter_cella[1].cin = counter_cella[0].cout;
	counter_cella[2].cin = counter_cella[1].cout;
	counter_cella[3].cin = counter_cella[2].cout;
	counter_cella[4].cin = counter_cella[3].cout;
	counter_cella[5].cin = counter_cella[4].cout;
	counter_cella[6].cin = counter_cella[5].cout;
	counter_cella[7].cin = counter_cella[6].cout;
	counter_cella[8].cin = counter_cella[7].cout;
	counter_cella[9].cin = counter_cella[8].cout;
	counter_cella[9..0].clk = clock;
	counter_cella[9..0].dataa = safe_q[];
	counter_cella[9..0].datab = cnt_en;
	counter_cella[9..0].datac = ((sset & s_val[]) # ((! sset) & data[]));
	counter_cella[9..0].ena = clk_en;
	counter_cella[9..0].sclr = sclr;
	counter_cella[9..0].sload = (sset_node # sload);
	a_val[] = B"1111111111";
	aclr_actual = aclr;
	aset_node = B"0";
	cout = counter_cella[9].cout;
	data[] = GND;
	q[] = safe_q[];
	s_val[] = B"1111111111";
	safe_q[] = counter_cella[9..0].regout;
	sload = GND;
	sset = GND;
	sset_node = B"0";
	time_to_clear = B"0";
	updownDir = B"1";
	ASSERT (0) 
	REPORT "LPM_MODULUS input value is 0. It should be within the range of 1 to 2^10. Assume no modulus input"
	SEVERITY WARNING;
END;
--VALID FILE