#include<intrins.h>
#define uchar unsigned char 
#define uint  unsigned int 

sbit LDAC=P2^4;      //控制DAC刷新
sbit DIN=P3^0;      //數據線
sbit SCLK=P3^1;      //時鐘線
sbit FS=P2^3;        //控制幀同步
sbit P2_0=P2^0;
sbit P2_1=P2^1;
sbit P2_2=P2^2;
sbit P2_7=P2^7;

unsigned char bdata buffer;    //字節反轉寄存器
unsigned char bdata buffer1;
sbit buffer_0=buffer^0;
sbit buffer_1=buffer^1;
sbit buffer_2=buffer^2;
sbit buffer_3=buffer^3;
sbit buffer_4=buffer^4;
sbit buffer_5=buffer^5;
sbit buffer_6=buffer^6;
sbit buffer_7=buffer^7;

sbit buffer1_0=buffer1^0;
sbit buffer1_1=buffer1^1;
sbit buffer1_2=buffer1^2;
sbit buffer1_3=buffer1^3;
sbit buffer1_4=buffer1^4;
sbit buffer1_5=buffer1^5;
sbit buffer1_6=buffer1^6;
sbit buffer1_7=buffer1^7;


void TLV_5614(uchar channel,uint da_value)
{
    bit bit_buffer;
    uint COM;

    switch(channel)
    {
      case 0: COM=da_value|0x1000; break;
      case 1: COM=da_value|0x5000; break;
      case 2: COM=da_value|0x9000; break;
      case 3: COM=da_value|0xd000; break;  // 注意|與||的區別
      default:  break;
    }

    buffer=(uchar)(COM>>8);          //高八位數據反轉處理

    bit_buffer=buffer_0;
    buffer_0=buffer_7;
    buffer_7=bit_buffer;

    bit_buffer=buffer_1;
    buffer_1=buffer_6;
    buffer_6=bit_buffer;

    bit_buffer=buffer_2;
    buffer_2=buffer_5;
    buffer_5=bit_buffer;

    bit_buffer=buffer_3;
    buffer_3=buffer_4;
    buffer_4=bit_buffer;



    buffer1=(uchar)(COM&0x00ff);      //低八位數據反轉處理

    bit_buffer=buffer1_0;
    buffer1_0=buffer1_7;
    buffer1_7=bit_buffer;

    bit_buffer=buffer1_1;
    buffer1_1=buffer1_6;
    buffer1_6=bit_buffer;

    bit_buffer=buffer1_2;
    buffer1_2=buffer1_5;
    buffer1_5=bit_buffer;

    bit_buffer=buffer1_3;
    buffer1_3=buffer1_4;
    buffer1_4=bit_buffer;

    P2_0=1;
    P2_1=0;
    P2_2=0;
    P2_7=1; //控制片選選通,P2_7置位使138有效。

    LDAC=0; //數據刷新
    FS=1;   
    FS=0;   //下降沿幀同步

	SBUF=buffer;
    while(!TI);
	TI=0;

    SBUF=buffer1;
    while(!TI);
	TI=0;

    LDAC=1;  //停止刷新
    FS=1;  

}



   //用IO口模擬SCLK傳送數據，速度慢，故采用串口TXD，RXD通信
   // for(i=16;i>0;i--)
   // { 
   //     DIN=(bit)(COM&0x8000);
   //     SCLK=1;
   //     COM=COM<<1;
   //     SCLK=0;
   // }
   // SCON=0X10; 
/*
void TLV_5614(uchar channel,uint da_value)
{
    uchar i;  
    uint COM;

    switch(channel)
    {
      case 0: COM=da_value|0x1000; break;
      case 1: COM=da_value|0x5000; break;
      case 2: COM=da_value|0x9000; break;
      case 3: COM=da_value|0xd000; break;
      default:  break;
    }

    P2_0=1;
    P2_1=0;
    P2_2=0; //控制片選選通

    LDAC=0; //數據刷新
    FS=1;   
    FS=0;   //下降沿幀同步

    for(i=16;i>0;i--)
    { 
        DIN=(bit)(COM&0x8000);
        SCLK=1;
        COM=COM<<1;
        SCLK=0;
    }

    //LDAC=1;  //停止刷新
    DIN=1;
	SCLK=1;
    FS=1; 

}
*/