?? cs8900a.reg
字號:
;==== VNT GETCE5B Driver Registry =====
; @CESYSGEN IF COREDLL_FULL_CRT
IF BSP_CIRRUS_CS8900A
[HKEY_LOCAL_MACHINE\Comm\CS8900A]
"DisplayName"="CS8900A Ethernet Driver"
"Group"="NDIS"
"ImagePath"="cs8900a.dll"
[HKEY_LOCAL_MACHINE\Comm\CS8900A\Linkage]
"Route"=multi_sz:"CS8900A1"
[HKEY_LOCAL_MACHINE\Comm\CS8900A1]
"DisplayName"="CS8900A Ethernet Driver"
"Group"="NDIS"
"ImagePath"="cs8900a.dll"
[HKEY_LOCAL_MACHINE\Comm\CS8900A1\Parms]
; BusNumber=0 and BusType=1 are proper for ix86 ISA bus.
; Change the entries depend on your hardware.
; Do NOT delete BusNumber or BusType, otherwise ends4isa.dll won't be loaded.
"BusNumber"=dword:0
"BusType"=dword:1
;This assumes the adapter will use IRQ 10.
;On CEPC this will be SYSINTR_FIRMWARE + IRQ
"InterruptNumber"=dword:0a
"Sysintr"=dword:1a
; DuplexMode: 0:AutoDetect; 1:HalfDuplex; 2:FullDuplex.
"DuplexMode"=dword:1
; The Ethernet Physical Address. For example,
; Ethernet Address 00:24:20:10:bf:03 is MACAddress1=0024,
; MACAddress2=2010,and MACAddress3=bf03.
; MACAddress=0000:0000:0000 means to read it from EEPROM.
"MACAddress1"=dword:0000
"MACAddress2"=dword:0000
"MACAddress3"=dword:0000
[HKEY_LOCAL_MACHINE\Comm\CS8900A1\Parms\TcpIp]
"EnableDHCP"=dword:1
"DefaultGateway"=""
"UseZeroBroadcast"=dword:0
"IpAddress"=""
"Subnetmask"=""
"DNS"=""
"WINS"=""
ENDIF BSP_CIRRUS_CS8900A
; @CESYSGEN ENDIF
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -