#ifndef __CONFIG_H 
#define __CONFIG_H

//This segment should not be modified
#ifndef TRUE
#define TRUE  1
#endif

#ifndef FALSE
#define FALSE 0
#endif

#include "I2CINT.h"

/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */
/* 系統設置, Fosc、Fcclk、Fcco、Fpclk必須定義*/
#define Fosc            20000000                    //Crystal frequence,10MHz~25MHz，should be the same as actual status. 
						                            //應當與實際一至晶振頻率,10MHz~25MHz，應當與實際一至
#define Fcclk           (Fosc * 3)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz. 
						                            //系統頻率，必須為Fosc的整數倍(1~32)，且<=60MHZ
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz. 
						                            //CCO頻率，必須為Fcclk的2、4、8、16倍，范圍為156MHz~320MHz
#define Fpclk           (Fcclk / 4) * 4             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4).
						                            //VPB時鐘頻率，只能為(Fcclk / 4)的1、2、4倍

#endif