?? test1.c

?? arm lpc2000 應用歷程 arm lpc2000 應用歷程
?? C
?? 第 1 頁 / 共 4 頁
字號:
12 3 4 下一頁
/****************************************************************************************
* 文件名：TEST.C
* 功能：GUI測試及演示程序。
* 作者：黃紹斌
* 日期：2003.09.09
****************************************************************************************/
#include "config.h"

#define   KEY_OK    3
#define   KEY_NEXT  2
#define   KEY_BACK  1


/****************************************************************************
* 名稱：DelayNS()
* 功能：長軟件延時
* 入口參數：dly		延時參數，值越大，延時越久
* 出口參數：無
****************************************************************************/
void  DelayNS(uint32  dly)
{  uint32  i;

   for(; dly>0; dly--) 
      for(i=0; i<5000; i++);
}


/****************************************************************************
* 名稱：WaitKey()
* 功能：等待一個有效按鍵，并返回按鍵值。本函數有去抖功能。
* 入口參數：無
* 出口參數：返回按鍵盤值。
****************************************************************************/
uint8  WaitKey(void)
{  uint32  i;
   uint8   key;
   uint8   key_bak;
   
   key = 0;							// 接收按鍵
   while(0==key)
   {  key = ZLG7290_GetKey();
      for(i=0; i<1000; i++);
   }
   
   key_bak = 1;
   while(0!=key_bak)				// 等待按鍵放開
   {  key_bak = ZLG7290_GetKey();
      for(i=0; i<1000; i++);
   }
    	
   return(key);
}




/****************************************************************************
* 名稱：DispLog()
* 功能：顯示LOG，用堅線填充屏幕(填充0xAA)。
* 入口參數：無
* 出口參數：無
****************************************************************************/
void  DispLog(void)
{  GUI_FillSCR(0xAA);				// 填充0xAA
   DelayNS(30);
}


/****************************************************************************
* 名稱：WaitAKey()
* 功能：等待任一個有效按鍵，并返回。
* 入口參數：無
* 出口參數：無
****************************************************************************/
void  WaitAKey(void)
{  uint8  key;

   while(1)
   {  key = WaitKey();
      if(key==KEY_NEXT) return;
      if(key==KEY_BACK) return;
      if(key==KEY_OK) return;
   }
}


/****************************************************************************
* 名稱：DemoLine()
* 功能：繪畫直線演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/
void  DemoLine(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Line for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
   
   /* 打鉤 */
   GUI_Line(90, 60, 110, 90, 1);
   GUI_Line(110, 90, 190, 50, 1);
   GUI_LineWith(50, 60, 70, 90, 3, 1);
   GUI_LineWith(70, 90, 170, 40, 3, 1);
   
   /* 畫垂直線及水平線 */
   GUI_RLine(70, 45, 70, 1);
   GUI_HLine(140, 85, 180, 1);
   
   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}


/****************************************************************************
* 名稱：DemoCircle()
* 功能：繪畫圓演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/
void  DemoCircle(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Circle for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
   
   /* 畫兩個圓 */
   GUI_CircleFill(75, 60, 15, 1);
   GUI_Circle(100, 70, 5, 1);
   
   /* 畫兩個交圓，并對交點進行填充 */
   GUI_Circle(135, 65, 20, 1);
   GUI_Circle(155, 65, 20, 1);
   GUI_FloodFill(145, 65, 1);  
   
   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}


/****************************************************************************
* 名稱：DemoArc()
* 功能：繪畫圓弧及扇形演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/
void  DemoArc(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Arc for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
   
   /* 畫兩個90度角的弧(第3、1像限) */
   GUI_Arc4(75, 70, 20, 3, 1);
   GUI_Arc4(65, 70, 20, 1, 1);
   
   GUI_Pieslice(110, 75, 20, 0, 135, 1);
   GUI_Arc(130, 60, 20, 30, 90, 1);
   GUI_Pieslice(160, 70, 20, 100, 0, 1);
   GUI_FloodFill(165, 72, 1);
   
   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}

/****************************************************************************
* 名稱：DemoEllipse()
* 功能：繪畫隨圓演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/  
void  DemoEllipse(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Ellipse for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
   
   GUI_Ellipse(50, 100, 50, 80, 1);				
   GUI_Ellipse(110, 130, 45, 90, 1);
   GUI_EllipseFill(140, 190, 60, 90, 1);
     
   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}



/****************************************************************************
* 名稱：DemoRectang()
* 功能：繪畫矩形演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/  
void  DemoRectang(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Rectang for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
     
   /* 畫一個矩形及填充矩形 */
   GUI_Rectangle(50, 45, 90, 85, 1);
   GUI_Rectangle(75, 50, 100, 88, 1);
   GUI_RectangleFill(80, 60, 130, 80, 1);
   GUI_Rectangle(110, 50, 180, 90, 1);
   GUI_Rectangle(135, 40, 190, 70, 1);
   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}


uint32  const mline[] = {120,40, 110,55, 90,60, 110,70, 120,90, 130,70, 150,60, 130,55, 120,40};
uint32  const poly5[] = {65,45, 50,60, 50,90, 80,90, 80,60, 65,45};
uint32  const poly4[] = {155,50, 190,50, 155,85, 190,85, 155,50};
/****************************************************************************
* 名稱：DemoPoly()
* 功能：繪畫多邊形演示。
* 入口參數：無
* 出口參數：無
****************************************************************************/  
void  DemoPoly(void)
{  WINDOWS  demow;
   
   /* 顯示演示窗口 */
   demow.x = 45;
   demow.y = 25;
   demow.with = 150;
   demow.hight = 80;
   demow.title = (uint8 *) "Poly for Demo";
   demow.state = (uint8 *) "Enter a key return.";
   GUI_WindowsDraw(&demow);
   
   GUI_LineS(poly5, 6, 1);
   GUI_LineS(mline, 9, 1);
   GUI_FloodFill(115, 55, 1);
   GUI_LineS(poly4, 5, 1);
   GUI_FloodFill(160, 52, 1);

   WaitAKey();						// 等待一按鍵
   GUI_WindowsHide(&demow);
}


/*--  調入了一幅圖像：C:\WINDOWS\Desktop\windows.bmp  --*/
/*--  寬度x高度=167x124  --*/
/*--  寬度不是8的倍數，現調整為：寬度x高度=168x124  --*/
uint8  const windows[] = {
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xF8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xF8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0x83,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0xF7,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0xEF,0xF0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x00,0x1F,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x0E,0x00,0x1F,0xE7,0xFE,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x1F,0xEF,0xFD,0xFF,0xFF,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x3E,0x00,0x1F,0xFF,
0xFF,0xFF,0xFF,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x3E,0x00,0x1F,0xFB,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x3F,0xF7,0xFE,0xFF,0xFF,0xFF,0xC0,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x7C,0x7F,0x3F,0xFF,0xFE,
0xFF,0xFF,0xFF,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,
0x00,0xFE,0x00,0x1F,0xFD,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xE0,0x00,0xFC,0x00,0x1F,0xF9,0xFF,0xFF,0xFF,0xFF,0xC0,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x01,0xFC,0x3F,0xBF,0xF9,0xFF,
0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xC0,0x03,0xF8,
0x00,0xFF,0x7F,0xF7,0xE1,0x1F,0xFF,0xFF,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0xF0,0x00,0xFE,0x7F,0xE7,0xE0,0x1F,0xF3,0xFF,0xFE,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xE0,0x01,0xFE,0x7F,0xEF,0xE0,0x1F,
12 3 4 下一頁
?? 文件大小 38863 K
?? 上傳用戶 zhangyan
?? 所屬分類軟件設計/軟件工程
??? 相關標簽

#2000 #arm #lpc
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? test1.c

?? 快捷鍵說明
