/************************************************************
File Name	: camif.c
Descriptions
 -S3C2440 camera test routines & basic libraries
History
 - July 23, 2003. Draft Version 0.0 by purnnamu
 - Janualy 15, 2004. Modifed by Boaz

Copyright (c) 2004 SAMSUNG Electronics.
# However, Anybody can use this code without our permission.  
*************************************************************/

#include <ctype.h>
#include "def.h"
#include "2442addr.h"
#include "2442lib.h"
#include "camif.h"
#include "lcdlib.h"
#include "glib.h"
#include "camproset.h" // for camera setting
//#include ".\bmp\pqvga16bsm5.h"
#include ".\bmp\422jpeg.h"
#include ".\bmp\420jpeg.h"
#include ".\bmp\foreman_cif_420.H"

volatile U32 camTestMode;
volatile U32 camCodecCaptureCount;
volatile U32 camPviewCaptureCount;
volatile U32 camCodecStatus;
volatile U32 camPviewStatus;
volatile U32 amount;

U32 save_GPJCON, save_GPJDAT, save_GPJUP;

U8 flagCaptured_P = 0;
U8 flagCaptured_C = 0;


void * func_camera_test[][2]=
{	
	(void *)Test_CamPreview,		"Preview Test ",
	(void *)Test_CamCodec,			"Codec Test ",
	(void *)Camera_Iic_Test,		"IIC interface test ",
	(void *)Test_YCbCr_to_RGB,	"YCbCr2RGB test",
	0,0
};

void Camera_Test(void)
{
	int i;
	
	Uart_Printf("\n======  Camera Interface Test Start ======\n");

	CamReset();

#if 0 // 24MHz
	// Initializing camif
	rCLKCON |= (1<<19); // enable camclk
	CamPortSet();	
	ChangeUPllValue(60, 4, 1);		// UPLL clock = 96MHz, PLL input 16.9344MHz
	rCLKDIVN|=(1<<3); // UCLK 48MHz setting for UPLL 96MHz
	// 0:48MHz, 1:24MHz, 2:16MHz, 3:12MHz...
	// Camera clock = UPLL/[(CAMCLK_DIV+1)X2]
	Uart_Printf("1...\n");
#else   // 32MHz revision point
// Initializing camif
	rCLKCON |= (1<<19); // enable camclk
	CamPortSet();	
	ChangeUPllValue(26, 4, 0);		// UPLL clock = 96MHz, PLL input 16.9344MHz
	rCLKDIVN |= (1<<3);
	
	// 32MHz only indepedent CAMCLKDIV
	
	Uart_Printf("1...\n");
#endif
	switch(USED_CAM_TYPE)
	{
	case CAM_AU70H :
		if (AU70H_VIDEO_SIZE==1152)
			SetCAMClockDivider(CAMCLK24000000); //Set Camera Clock for SXGA
		if (AU70H_VIDEO_SIZE==640)
			SetCAMClockDivider(CAMCLK16000000); //Set Camera Clock for VGA
		break;
	case CAM_S5X3A1 :
		SetCAMClockDivider(CAMCLK24000000); //Set Camera Clock for SXGA
	
		break;
	default : 	// 24MHz
		//SetCAMClockDivider(CAMCLK24000000); //Set Camera Clock 24MHz s5x532, ov7620
		//SetCAMClockDivider(CAMCLK32000000);
		rCAMDIVN =0x30;

		Uart_Printf("clkdivn= %08x\n", rCAMDIVN);
		break;
	}
	Uart_Printf("2...\n");
	// Initializing camera module
	CamModuleReset(); // s5x532 must do this..
	Delay(500); // ready time of s5x433, s5x532 IIC interface. needed...
	CameraModuleSetting();

	Uart_Printf("Initializing end...\n");

	Uart_Printf("clkdivn2= %08x\n", rCAMDIVN);
	while(1)
	{
		i=0;
		Uart_Printf("\n\n");
		while(1)
		{   //display menu
			Uart_Printf("%2d:%s\n",i,func_camera_test[i][1]);
			i++;
			if((int)(func_camera_test[i][0])==0)
			{
				Uart_Printf("\n");
				break;
			}
			if((i%4)==0)
			Uart_Printf("\n");
		}

		Uart_Printf("\nPress only Enter key to exit : ");
		i = Uart_GetIntNum();
		if(i==-1) break;		// return.
		if(i>=0 && (i<((sizeof(func_camera_test)-1)/8)) )	// select and execute...
			( (void (*)(void)) (func_camera_test[i][0]) )();
	}
	
	Uart_Printf("\n====== Camera IF Test program end ======\n");

//	CamModuleReset(); // s5x532 must do this..
	rCLKCON &= ~(1<<19); // disable camclk
	
}


void CamPortSet(void)
{
	save_GPJCON = rGPJCON;
	save_GPJDAT = rGPJDAT;
	save_GPJUP = rGPJUP;

	rGPJCON = 0x2aaaaaa;
	rGPJDAT = 0;
	rGPJUP = 0;
}

void CamPortReturn(void)
{
	rGPJCON = save_GPJCON;
	rGPJDAT = save_GPJDAT;
	rGPJUP = save_GPJUP;
}

void CamPreviewIntUnmask(void)
{
    rINTSUBMSK &= ~(BIT_SUB_CAM_P);//INT CAMERA Port A ENABLE 
    rINTMSK &= ~(BIT_CAM);
}

void CamCodecIntUnmask(void)
{
    rINTSUBMSK &= ~(BIT_SUB_CAM_C);//INT CAMERA Port B ENABLE 
    rINTMSK &= ~(BIT_CAM);
}

void CamPreviewIntMask(void)
{
    rINTSUBMSK |= BIT_SUB_CAM_P;//INT CAMERA Port A ENABLE 
    rINTMSK |= (BIT_CAM);
}

void CamCodecIntMask(void)
{
    rINTSUBMSK |= BIT_SUB_CAM_C;//INT CAMERA Port B ENABLE 
    rINTMSK |= (BIT_CAM);
}


/******************************************************
 *                                                                      							*    
 *                       camera interface initialization                    		*
 *                                                                            					*     
 *******************************************************/

void CamReset(void)
{
	rCIGCTRL |= (1<<31); //camera I/F soft reset
	Delay(10);
	rCIGCTRL &= ~(1<<31);
}

void CamModuleReset(void)
{
	switch(USED_CAM_TYPE)
	{
	case CAM_OV7620 : // reset - active high
	case CAM_S5X532 : // reset - active low, but H/W inverted.. so, in this case active high
	case CAM_S5X433 : // reset - active low, but H/W inverted.. so, in this case active high
	case CAM_S5X3A1 : // reset - active low, but H/W inverted.. so, in this case active high
		rCIGCTRL |= (1<<30);	  //external camera reset high
		Delay(30);
		rCIGCTRL &= ~(1<<30);	//external camera reset low
		break;
	case CAM_AU70H : // reset - active low
	default :
		rCIGCTRL &= ~(1<<30);	//external camera reset low
		Delay(10);
		rCIGCTRL |= (1<<30); //external camera reset high
		break;
	}
}

// 0:48MHz, 1:24MHz, 2:16MHz, 3:12MHz...
// Camera clock = UPLL/[(CAMCLK_DIV+1)X2]
void SetCAMClockDivider(int divn) 
{
	//rCAMDIVN = (rCAMDIVN & ~(0xf))|(1<<4)|(divn); // CAMCLK is divided..
	rCAMDIVN |= ((1<<4)|(1<<5));
}

/* Description of Parameters
CoDstWidth: Destination Width of Codec Path
CoDstHeight: Destination Height of Codec Path
PrDstWidth: Destination Width of Preview Path
PrDstHeight: Destination Height of Preview Path
WinHorOffset: Size of Window Offset for Horizontal Direction
WinVerOffset: Size of Window Offset for Vertical Direction
CoFrameBuffer: Start Address for Codec DMA
PrFrameBuffer: Start Address for Previe DMA
*/
void CamInit(U32 CoDstWidth, U32 CoDstHeight, U32 PrDstWidth, U32 PrDstHeight, 
			U32 WinHorOffset, U32 WinVerOffset,  U32 CoFrameBuffer, U32 PrFrameBuffer)
{
	U32 WinOfsEn;
	U32 divisor, multiplier;
	U32 MainBurstSizeY, RemainedBurstSizeY, MainBurstSizeC, RemainedBurstSizeC, MainBurstSizeRGB, RemainedBurstSizeRGB;
	U32 H_Shift, V_Shift, PreHorRatio, PreVerRatio, MainHorRatio, MainVerRatio;
	U32 SrcWidth, SrcHeight;
	U32 ScaleUp_H_Co, ScaleUp_V_Co, ScaleUp_H_Pr, ScaleUp_V_Pr;

	//constant for calculating codec dma address
	if(CAM_CODEC_OUTPUT)
		divisor=2; //CCIR-422
	else
		divisor=4; //CCIR-420
		
	//constant for calculating preview dma address
	if(CAM_PVIEW_OUTPUT)
		multiplier=4;
	else
		multiplier=2;
	
	if(WinHorOffset==0 && WinVerOffset==0)
		WinOfsEn=0;
	else
		WinOfsEn=1;

	SrcWidth=CAM_SRC_HSIZE-WinHorOffset*2;
	SrcHeight=CAM_SRC_VSIZE-WinVerOffset*2;

	if(SrcWidth>=CoDstWidth) ScaleUp_H_Co=0; //down
	else ScaleUp_H_Co=1;		//up

	if(SrcHeight>=CoDstHeight) ScaleUp_V_Co=0;
	else ScaleUp_V_Co=1;		

	if(SrcWidth>=PrDstWidth) ScaleUp_H_Pr=0; //down
	else ScaleUp_H_Pr=1;		//up

	if(SrcHeight>=PrDstHeight) ScaleUp_V_Pr=0;   // edited 040225
	else ScaleUp_V_Pr=1;		

	////////////////// common control setting
	rCIGCTRL |= (1<<26)|(0<<27); // inverse PCLK, test pattern
	rCIWDOFST = (1<<30)|(0xf<<12); // clear overflow 
	rCIWDOFST = 0;	
	rCIWDOFST=(WinOfsEn<<31)|(WinHorOffset<<16)|(WinVerOffset);
	rCISRCFMT=(CAM_ITU601<<31)|(0<<30)|(0<<29)|(CAM_SRC_HSIZE<<16)|(CAM_ORDER_YCBYCR<<14)|(CAM_SRC_VSIZE);

	////////////////// codec port setting
	if (CAM_CODEC_4PP)
	{
		rCICOYSA1=CoFrameBuffer;
		rCICOYSA2=rCICOYSA1+CoDstWidth*CoDstHeight+2*CoDstWidth*CoDstHeight/divisor;
		rCICOYSA3=rCICOYSA2+CoDstWidth*CoDstHeight+2*CoDstWidth*CoDstHeight/divisor;
		rCICOYSA4=rCICOYSA3+CoDstWidth*CoDstHeight+2*CoDstWidth*CoDstHeight/divisor;
		
		rCICOCBSA1=rCICOYSA1+CoDstWidth*CoDstHeight;
		rCICOCBSA2=rCICOYSA2+CoDstWidth*CoDstHeight;
		rCICOCBSA3=rCICOYSA3+CoDstWidth*CoDstHeight;
		rCICOCBSA4=rCICOYSA4+CoDstWidth*CoDstHeight;

		rCICOCRSA1=rCICOCBSA1+CoDstWidth*CoDstHeight/divisor;
		rCICOCRSA2=rCICOCBSA2+CoDstWidth*CoDstHeight/divisor;
		rCICOCRSA3=rCICOCBSA3+CoDstWidth*CoDstHeight/divisor;
		rCICOCRSA4=rCICOCBSA4+CoDstWidth*CoDstHeight/divisor;
	}
	else
	{
		rCICOYSA1=CoFrameBuffer;
		rCICOYSA2=rCICOYSA1;
		rCICOYSA3=rCICOYSA1;
		rCICOYSA4=rCICOYSA1;
		
		rCICOCBSA1=rCICOYSA1+CoDstWidth*CoDstHeight;
		rCICOCBSA2=rCICOCBSA1;
		rCICOCBSA3=rCICOCBSA1;
		rCICOCBSA4=rCICOCBSA1;
		
		rCICOCRSA1=rCICOCBSA1+CoDstWidth*CoDstHeight/divisor;
		rCICOCRSA2=rCICOCRSA1;
		rCICOCRSA3=rCICOCRSA1;
		rCICOCRSA4=rCICOCRSA1;
	}
	rCICOTRGFMT=(CAM_CODEC_IN_422<<31)|(CAM_CODEC_OUTPUT<<30)|(CoDstWidth<<16)|(CAM_FLIP_NORMAL<<14)|(CoDstHeight);

	CalculateBurstSize(CoDstWidth, &MainBurstSizeY, &RemainedBurstSizeY);
	CalculateBurstSize(CoDstWidth/2, &MainBurstSizeC, &RemainedBurstSizeC);
	rCICOCTRL=(MainBurstSizeY<<19)|(RemainedBurstSizeY<<14)|(MainBurstSizeC<<9)|(RemainedBurstSizeC<<4);

	CalculatePrescalerRatioShift(SrcWidth, CoDstWidth, &PreHorRatio, &H_Shift);
	CalculatePrescalerRatioShift(SrcHeight, CoDstHeight, &PreVerRatio, &V_Shift);
	MainHorRatio=(SrcWidth<<8)/(CoDstWidth<<H_Shift);
	MainVerRatio=(SrcHeight<<8)/(CoDstHeight<<V_Shift);
    			
	rCICOSCPRERATIO=((10-H_Shift-V_Shift)<<28)|(PreHorRatio<<16)|(PreVerRatio);
	rCICOSCPREDST=((SrcWidth/PreHorRatio)<<16)|(SrcHeight/PreVerRatio); 
	rCICOSCCTRL=(CAM_SCALER_BYPASS_OFF<<31)|(ScaleUp_H_Co<<30)|(ScaleUp_V_Co<<29)|(MainHorRatio<<16)|(MainVerRatio);

	rCICOTAREA=CoDstWidth*CoDstHeight;

	///////////////// preview port setting
	if (CAM_PVIEW_4PP) // codec view mode
	{
		rCIPRCLRSA1=PrFrameBuffer;
		rCIPRCLRSA2=rCIPRCLRSA1+PrDstWidth*PrDstHeight*multiplier;
		rCIPRCLRSA3=rCIPRCLRSA2+PrDstWidth*PrDstHeight*multiplier;
		rCIPRCLRSA4=rCIPRCLRSA3+PrDstWidth*PrDstHeight*multiplier;
	}	
	else // direct preview mode
	{
		rCIPRCLRSA1=LCDFRAMEBUFFER;
		rCIPRCLRSA2=LCDFRAMEBUFFER;
		rCIPRCLRSA3=LCDFRAMEBUFFER;
		rCIPRCLRSA4=LCDFRAMEBUFFER;
	}	

	rCIPRTRGFMT=(PrDstWidth<<16)|(CAM_FLIP_NORMAL<<14)|(PrDstHeight);

	if (CAM_PVIEW_OUTPUT==CAM_RGB24B)
		CalculateBurstSize(PrDstWidth*4, &MainBurstSizeRGB, &RemainedBurstSizeRGB);
	else // RGB16B
		CalculateBurstSize(PrDstWidth*2, &MainBurstSizeRGB, &RemainedBurstSizeRGB);
   	rCIPRCTRL=(MainBurstSizeRGB<<19)|(RemainedBurstSizeRGB<<14);

	CalculatePrescalerRatioShift(SrcWidth, PrDstWidth, &PreHorRatio, &H_Shift);
	CalculatePrescalerRatioShift(SrcHeight, PrDstHeight, &PreVerRatio, &V_Shift);
	MainHorRatio=(SrcWidth<<8)/(PrDstWidth<<H_Shift);
	MainVerRatio=(SrcHeight<<8)/(PrDstHeight<<V_Shift);
	rCIPRSCPRERATIO=((10-H_Shift-V_Shift)<<28)|(PreHorRatio<<16)|(PreVerRatio);		 
	rCIPRSCPREDST=((SrcWidth/PreHorRatio)<<16)|(SrcHeight/PreVerRatio);
	rCIPRSCCTRL=(1<<31)|(CAM_PVIEW_OUTPUT<<30)|(ScaleUp_H_Pr<<29)|(ScaleUp_V_Pr<<28)|(MainHorRatio<<16)|(MainVerRatio);
    
	rCIPRTAREA= PrDstWidth*PrDstHeight;
}



/********************************************************
 CalculateBurstSize - Calculate the busrt lengths
 
 Description:	
 - dstHSize: the number of the byte of H Size.
 
*/
void CalculateBurstSize(U32 hSize,U32 *mainBurstSize,U32 *remainedBurstSize)
{
	U32 tmp;	
	tmp=(hSize/4)%16;
	switch(tmp) {
		case 0:
			*mainBurstSize=16;
			*remainedBurstSize=16;
			break;
		case 4:
			*mainBurstSize=16;
			*remainedBurstSize=4;
			break;
		case 8:
			*mainBurstSize=16;
			*remainedBurstSize=8;
			break;
		default: 
			tmp=(hSize/4)%8;
			switch(tmp) {
				case 0:
					*mainBurstSize=8;
					*remainedBurstSize=8;
					break;
				case 4:
					*mainBurstSize=8;
					*remainedBurstSize=4;
				default:
					*mainBurstSize=4;
					tmp=(hSize/4)%4;
					*remainedBurstSize= (tmp) ? tmp: 4;
					break;
			}
			break;
	}		    	    		
}



/********************************************************
 CalculatePrescalerRatioShift - none
 
 Description:	
 - none
 
*/
void CalculatePrescalerRatioShift(U32 SrcSize, U32 DstSize, U32 *ratio,U32 *shift)
{
	if(SrcSize>=64*DstSize) {
		Uart_Printf("ERROR: out of the prescaler range: SrcSize/DstSize = %d(< 64)\n",SrcSize/DstSize);
		while(1);
	}
	else if(SrcSize>=32*DstSize) {
		*ratio=32;
		*shift=5;
	}
	else if(SrcSize>=16*DstSize) {
		*ratio=16;
		*shift=4;
	}
	else if(SrcSize>=8*DstSize) {
		*ratio=8;
		*shift=3;
	}
	else if(SrcSize>=4*DstSize) {
		*ratio=4;
		*shift=2;
	}
	else if(SrcSize>=2*DstSize) {
		*ratio=2;
		*shift=1;
	}
	else {
		*ratio=1;
		*shift=0;
	}    	
}


/********************************************************
 CamCaptureStart - Start camera capture operation.
 
 Description:	
 - mode= CAM_CODEC_CAPTURE_ENABLE_BIT or CAM_PVIEW_CAPTURE_ENABLE_BIT or both
  
*/
void CamCaptureStart(U32 mode)
{ 
    
	if(mode&CAM_CODEC_SCALER_CAPTURE_ENABLE_BIT) {
		camCodecStatus=CAM_STARTED;
		rCICOSCCTRL|=CAM_CODEC_SACLER_START_BIT;
	}
	
	if(mode&CAM_PVIEW_SCALER_CAPTURE_ENABLE_BIT) {
		camPviewStatus=CAM_STARTED;
		rCIPRSCCTRL|=CAM_PVIEW_SACLER_START_BIT;
	}

	if(mode&CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT) {
		camCodecStatus=CAM_STARTED;
		rCICOSCCTRL|=CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT;
	}
	
	rCIIMGCPT|=CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT|mode;
}


void CamCaptureStop(void)
{
	camCodecStatus=CAM_STOP_ISSUED;
	camPviewStatus=CAM_STOP_ISSUED;
}


void _CamCodecStopHw(void)
{
	rCICOSCCTRL &= ~CAM_CODEC_SACLER_START_BIT; //stop codec scaler.
	rCIIMGCPT &= ~CAM_CODEC_SCALER_CAPTURE_ENABLE_BIT; //stop capturing for codec scaler.
	if(!(rCIIMGCPT & CAM_PVIEW_SCALER_CAPTURE_ENABLE_BIT))
		rCIIMGCPT &= ~CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT; //stop capturing for preview scaler if needed.
	rCICOCTRL |= (1<<2); //Enable last IRQ at the end of frame capture.
		       //NOTE:LastIrqEn bit should be set after clearing CAPTURE_ENABLE_BIT & SCALER_START_BIT
}

void _CamPviewStopHw(void)
{
	rCIPRSCCTRL &= ~CAM_PVIEW_SACLER_START_BIT; //stop preview scaler.
	rCIIMGCPT &= ~CAM_PVIEW_SCALER_CAPTURE_ENABLE_BIT; //stop capturing for preview scaler.
	if(!(rCIIMGCPT&CAM_CODEC_SCALER_CAPTURE_ENABLE_BIT))
		rCIIMGCPT &= ~CAM_CAMIF_GLOBAL_CAPTURE_ENABLE_BIT; //stop capturing for codec scaler if needed.
	rCIPRCTRL |= (1<<2); //Enable last IRQ at the end of frame capture.
       	//NOTE:LastIrqEn bit should be set after clearing CAPTURE_ENABLE_BIT & SCALER_START_BIT
}


void __irq CamIsr(void)
{

	U32 completedFrameIndex;

	if (rSUBSRCPND&BIT_SUB_CAM_C)
	{
		Uart_Printf("[C]");
		CamCodecIntMask();
		rSUBSRCPND |= BIT_SUB_CAM_C;
		ClearPending(BIT_CAM);
		switch(camCodecStatus) {
			case CAM_STOP_ISSUED:
				_CamCodecStopHw();
				camCodecStatus=CAM_LAST_CAPTURING;
				Uart_Printf("cr=%x\n", rCICOCTRL);
				//Uart_Printf("cS1\n");
				break;
			case CAM_LAST_CAPTURING:
				camCodecStatus=CAM_STOPPED;
				CamCodecIntMask();			
				//Uart_Printf("cS2\n");
				return;
			case CAM_STARTED:
				flagCaptured_C = 1;
//				_CamCodecStopHw();
				if(camTestMode&CAM_TEST_MODE_CODEC)	{
					if(camCodecCaptureCount>0)