/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                            const.h
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                                    Forrest Yu, 2005
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/

#ifndef	_TINIX_CONST_H_
#define	_TINIX_CONST_H_


/* EXTERN */
#define	EXTERN	extern	/* EXTERN is defined as extern except in global.c */

/* 函數類型 */
#define	PUBLIC		/* PUBLIC is the opposite of PRIVATE */
#define	PRIVATE	static	/* PRIVATE x limits the scope of x */

/* Boolean */
#define	TRUE	1
#define	FALSE	0

/* Color */
/*
 * e.g.	MAKE_COLOR(BLUE, RED)
 *	MAKE_COLOR(BLACK, RED) | BRIGHT
 *	MAKE_COLOR(BLACK, RED) | BRIGHT | FLASH
 */
#define	BLACK	0x0	/* 0000 */
#define	WHITE	0x7	/* 0111 */
#define	RED	0x4	/* 0100 */
#define	GREEN	0x2	/* 0010 */
#define	BLUE	0x1	/* 0001 */
#define	FLASH	0x80	/* 1000 0000 */
#define	BRIGHT	0x08	/* 0000 1000 */
#define	MAKE_COLOR(x,y)	(x | y)	/* MAKE_COLOR(Background,Foreground) */

/* GDT 和 IDT 中描述符的個數 */
#define	GDT_SIZE	128
#define	IDT_SIZE	256

/* 權限 */
#define	PRIVILEGE_KRNL	0
#define	PRIVILEGE_TASK	1
#define	PRIVILEGE_USER	3
/* RPL */
#define	RPL_KRNL	SA_RPL0
#define	RPL_TASK	SA_RPL1
#define	RPL_USER	SA_RPL3

/* 8259A interrupt controller ports. */
#define	INT_M_CTL	0x20	/* I/O port for interrupt controller         <Master> */
#define	INT_M_CTLMASK	0x21	/* setting bits in this port disables ints   <Master> */
#define	INT_S_CTL	0xA0	/* I/O port for second interrupt controller  <Slave>  */
#define	INT_S_CTLMASK	0xA1	/* setting bits in this port disables ints   <Slave>  */

/* 8253/8254 PIT (Programmable Interval Timer) */
#define TIMER0          0x40	/* I/O port for timer channel 0 */
#define TIMER_MODE      0x43	/* I/O port for timer mode control */
#define RATE_GENERATOR	0x34	/* 00-11-010-0 : Counter0 - LSB then MSB - rate generator - binary */
#define TIMER_FREQ	1193182L/* clock frequency for timer in PC and AT */
#define HZ		100	/* clock freq (software settable on IBM-PC) */

/* AT keyboard */
/* 8042 ports */
#define	KB_DATA		0x60	/* I/O port for keyboard data
					Read : Read Output Buffer 
					Write: Write Input Buffer(8042 Data&8048 Command) */
#define	KB_CMD		0x64	/* I/O port for keyboard command
					Read : Read Status Register
					Write: Write Input Buffer(8042 Command) */

/* Hardware interrupts */
#define	NR_IRQ		16	/* Number of IRQs */
#define	CLOCK_IRQ	0
#define	KEYBOARD_IRQ	1
#define	CASCADE_IRQ	2	/* cascade enable for 2nd AT controller */
#define	ETHER_IRQ	3	/* default ethernet interrupt vector */
#define	SECONDARY_IRQ	3	/* RS232 interrupt vector for port 2 */
#define	RS232_IRQ	4	/* RS232 interrupt vector for port 1 */
#define	XT_WINI_IRQ	5	/* xt winchester */
#define	FLOPPY_IRQ	6	/* floppy disk */
#define	PRINTER_IRQ	7
#define	AT_WINI_IRQ	14	/* at winchester */


/* system call */
#define	NR_SYS_CALL	1


#endif /* _TINIX_CONST_H_ */