#include "config_GD61.h"
#include "include_GD61.h"

//////////////////////////////////////////////////////////////////////////
int main(void)
{


	WatchDog_Start(4000);	// watchDog reset time 4 seconds
	
	IRQDisable();
	SetDefaultUart0();					// UART0 assigned to IRQ 			slot0.	ok.
	
	Uart0SendString("self_testing program for RF_Modem");
	Uart0SendString("..........by Travis 27th Sep.2006");
	Uart0SendEnter();
	Uart0SendString("System Running......");
	Uart0SendEnter();
	Uart0SendEnter();
	
	EINT0_Initialize();					// 分配外部中斷0到向量中斷4			slot4   ok.
	TimerInitialize();					// 置定時器0中斷					slot5   ok.
	IRQEnable();						// 打開中斷
	
	RF_StartCC1000();
	RFtoRXmode();			// release RF channel	
	RFtoRXmode();			// release RF channel
	
	IO1DIR = (0xFF << 18);	// P1[25:18]控制LED8~LED1，低電平點亮
	IO1CLR = LED1;			// LED1點亮	
	IO1SET = LED5;			// LED1 off	
	IO1SET = LED6;			// LED1	off
	IO1SET = LED7;			// LED1	off
	IO1SET = LED8;			// LED1	off
	
	while(1){
		Uart0ToRF();		//for RF modem
		RFtoUart0();

		RFtoRXmode();		//release RF channel
		WatchDogClear();
	}

	
}

/**************************************************************************/
//                            End Of File
/**************************************************************************/