#include "StdAfx.h"
#include ".\getsn.h"
#include "Iptypes.h"
#include "Iphlpapi.h"

BYTE szSystemInfo[4096]; // 在程序執行完畢后，此處存儲取得的系統特征碼
UINT uSystemInfoLen = 0; // 在程序執行完畢后，此處存儲取得的系統特征碼的長度

#define  FILE_DEVICE_SCSI              0x0000001b
#define  IOCTL_SCSI_MINIPORT_IDENTIFY  ( ( FILE_DEVICE_SCSI << 16 ) + 0x0501 )

#define  IOCTL_SCSI_MINIPORT 0x0004D008  //  see NTDDSCSI.H for definition

#define  IDENTIFY_BUFFER_SIZE  512
#define  SENDIDLENGTH  ( sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE )

#define  IDE_ATAPI_IDENTIFY  0xA1  //  Returns ID sector for ATAPI.
#define  IDE_ATA_IDENTIFY    0xEC  //  Returns ID sector for ATA.
#define  DFP_RECEIVE_DRIVE_DATA   0x0007c088

typedef struct _IDSECTOR
{
    USHORT  wGenConfig;
    USHORT  wNumCyls;
    USHORT  wReserved;
    USHORT  wNumHeads;
    USHORT  wBytesPerTrack;
    USHORT  wBytesPerSector;
    USHORT  wSectorsPerTrack;
    USHORT  wVendorUnique[3];
    CHAR    sSerialNumber[20];
    USHORT  wBufferType;
    USHORT  wBufferSize;
    USHORT  wECCSize;
    CHAR    sFirmwareRev[8];
    CHAR    sModelNumber[40];
    USHORT  wMoreVendorUnique;
    USHORT  wDoubleWordIO;
    USHORT  wCapabilities;
    USHORT  wReserved1;
    USHORT  wPIOTiming;
    USHORT  wDMATiming;
    USHORT  wBS;
    USHORT  wNumCurrentCyls;
    USHORT  wNumCurrentHeads;
    USHORT  wNumCurrentSectorsPerTrack;
    ULONG   ulCurrentSectorCapacity;
    USHORT  wMultSectorStuff;
    ULONG   ulTotalAddressableSectors;
    USHORT  wSingleWordDMA;
    USHORT  wMultiWordDMA;
    BYTE    bReserved[128];
} IDSECTOR, *PIDSECTOR;

typedef struct _DRIVERSTATUS

{
    BYTE  bDriverError;  //  Error code from driver, or 0 if no error.
    BYTE  bIDEStatus;    //  Contents of IDE Error reGISter.
    //  Only valid when bDriverError is SMART_IDE_ERROR.
    BYTE  bReserved[2];  //  Reserved for future expansion.
    DWORD  dwReserved[2];  //  Reserved for future expansion.
} DRIVERSTATUS, *PDRIVERSTATUS, *LPDRIVERSTATUS;

typedef struct _SENDCMDOUTPARAMS
{
    DWORD         cBufferSize;   //  Size of bBuffer in bytes
    DRIVERSTATUS  DriverStatus;  //  Driver status structure.
    BYTE          bBuffer[1];    //  Buffer of arbitrary length in which to store the data read from the                                                       // drive.
} SENDCMDOUTPARAMS, *PSENDCMDOUTPARAMS, *LPSENDCMDOUTPARAMS;

typedef struct _SRB_IO_CONTROL
{
    ULONG HeaderLength;
    UCHAR Signature[8];
    ULONG Timeout;
    ULONG ControlCode;
    ULONG ReturnCode;
    ULONG Length;
} SRB_IO_CONTROL, *PSRB_IO_CONTROL;

typedef struct _IDEREGS
{
    BYTE bFeaturesReg;       // Used for specifying SMART "commands".
    BYTE bSectorCountReg;    // IDE sector count register
    BYTE bSectorNumberReg;   // IDE sector number register
    BYTE bCylLowReg;         // IDE low order cylinder value
    BYTE bCylHighReg;        // IDE high order cylinder value
    BYTE bDriveHeadReg;      // IDE drive/head register
    BYTE bCommandReg;        // Actual IDE command.
    BYTE bReserved;          // reserved for future use.  Must be zero.
} IDEREGS, *PIDEREGS, *LPIDEREGS;

typedef struct _SENDCMDINPARAMS
{
    DWORD     cBufferSize;   //  Buffer size in bytes
    IDEREGS   irDriveRegs;   //  Structure with drive register values.
    BYTE bDriveNumber;       //  Physical drive number to send 
    //  command to (0,1,2,3).
    BYTE bReserved[3];       //  Reserved for future expansion.
    DWORD     dwReserved[4]; //  For future use.
    BYTE      bBuffer[1];    //  Input buffer.
} SENDCMDINPARAMS, *PSENDCMDINPARAMS, *LPSENDCMDINPARAMS;

typedef struct _GETVERSIONOUTPARAMS
{
    BYTE bVersion;      // Binary driver version.
    BYTE bRevision;     // Binary driver revision.
    BYTE bReserved;     // Not used.
    BYTE bIDEDeviceMap; // Bit map of IDE devices.
    DWORD fCapabilities; // Bit mask of driver capabilities.
    DWORD dwReserved[4]; // For future use.
} GETVERSIONOUTPARAMS, *PGETVERSIONOUTPARAMS, *LPGETVERSIONOUTPARAMS;

//////////////////////////////////////////////////////////////////////

//結構定義 
typedef struct _UNICODE_STRING 
{ 
    USHORT  Length;//長度 
    USHORT  MaximUMLength;//最大長度 
    PWSTR  Buffer;//緩存指針 
} UNICODE_STRING,*PUNICODE_STRING; 

typedef struct _OBJECT_ATTRIBUTES 
{ 
    ULONG Length;//長度 18h 
    HANDLE RootDirectory;//  00000000 
    PUNICODE_STRING ObjectName;//指向?qū)ο竺闹羔?
    ULONG Attributes;//對象屬性00000040h 
    PVOID SecurityDescriptor;        // Points to type SECURITY_DESCRIPTOR，0 
    PVOID SecurityQualityOfService;  // Points to type SECURITY_QUALITY_OF_SERVICE，0 
} OBJECT_ATTRIBUTES; 
typedef OBJECT_ATTRIBUTES *POBJECT_ATTRIBUTES; 
/////////////////
typedef DWORD  (__stdcall *ZWOS)(PHANDLE,ACCESS_MASK,POBJECT_ATTRIBUTES);
typedef DWORD  (__stdcall *ZWMV)(HANDLE,HANDLE,PVOID,ULONG,ULONG,PLARGE_INTEGER,PSIZE_T,DWORD,ULONG,ULONG);
typedef DWORD  (__stdcall *ZWUMV)(HANDLE,PVOID);
BOOL WinNTHDSerialNumAsScsiRead( BYTE* dwSerial, UINT* puSerialLen, UINT uMaxSerialLen )
{
	BOOL bInfoLoaded = FALSE;
	
	for( int iController = 0; iController < 2; ++ iController )
	{
		HANDLE hScsiDriveIOCTL = 0;
		char   szDriveName[256];
	    
		//  Try to get a handle to PhysicalDrive IOCTL, report failure
		//  and exit if can't.
		sprintf( szDriveName, "\\\\.\\Scsi%d:", iController );

		//  Windows NT, Windows 2000, any rights should do
		hScsiDriveIOCTL = CreateFile( szDriveName,
			GENERIC_READ | GENERIC_WRITE, 
			FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
			OPEN_EXISTING, 0, NULL);

		// if (hScsiDriveIOCTL == INVALID_HANDLE_VALUE)
		//    printf ("Unable to open SCSI controller %d, error code: 0x%lX\n",
		//            controller, GetLastError ());
	    
		if( hScsiDriveIOCTL != INVALID_HANDLE_VALUE )
		{
			int iDrive = 0;
			for( iDrive = 0; iDrive < 2; ++ iDrive )
			{
				char szBuffer[sizeof( SRB_IO_CONTROL ) + SENDIDLENGTH] = { 0 };

				SRB_IO_CONTROL* p = ( SRB_IO_CONTROL* )szBuffer;
				SENDCMDINPARAMS* pin = ( SENDCMDINPARAMS* )( szBuffer + sizeof( SRB_IO_CONTROL ) );
				DWORD dwResult;

				p->HeaderLength = sizeof( SRB_IO_CONTROL );
				p->Timeout = 10000;
				p->Length = SENDIDLENGTH;
				p->ControlCode = IOCTL_SCSI_MINIPORT_IDENTIFY;
				strncpy( ( char* )p->Signature, "SCSIDISK", 8 );

				pin->irDriveRegs.bCommandReg = IDE_ATA_IDENTIFY;
				pin->bDriveNumber = iDrive;
	            
				if( DeviceIoControl( hScsiDriveIOCTL, IOCTL_SCSI_MINIPORT, 
					szBuffer,
					sizeof( SRB_IO_CONTROL ) + sizeof( SENDCMDINPARAMS ) - 1,
					szBuffer,
					sizeof( SRB_IO_CONTROL ) + SENDIDLENGTH,
					&dwResult, NULL ) )
				{
					SENDCMDOUTPARAMS* pOut = ( SENDCMDOUTPARAMS* )( szBuffer + sizeof( SRB_IO_CONTROL ) );
					IDSECTOR* pId = ( IDSECTOR* )( pOut->bBuffer );
					if( pId->sModelNumber[0] )
					{
						if( * puSerialLen + 20U <= uMaxSerialLen )
						{
							// 序列號
							CopyMemory( dwSerial + * puSerialLen, ( ( USHORT* )pId ) + 10, 20 );

							// Cut off the trailing blanks
							for( UINT i = 20; i != 0U && ' ' == dwSerial[* puSerialLen + i - 1]; -- i )
							{}
							* puSerialLen += i;

							// 型號
							CopyMemory( dwSerial + * puSerialLen, ( ( USHORT* )pId ) + 27, 40 );
							// Cut off the trailing blanks
							for( i = 40; i != 0U && ' ' == dwSerial[* puSerialLen + i - 1]; -- i )
							{}
							* puSerialLen += i;

							bInfoLoaded = TRUE;
						}
						else
						{
							::CloseHandle( hScsiDriveIOCTL );
							return bInfoLoaded;
						}
					}
				}
			}
			::CloseHandle( hScsiDriveIOCTL );
		}
	}
	return bInfoLoaded;
}

BOOL DoIdentify( HANDLE hPhysicalDriveIOCTL, PSENDCMDINPARAMS pSCIP,
				PSENDCMDOUTPARAMS pSCOP, BYTE bIDCmd, BYTE bDriveNum,
				PDWORD lpcbBytesReturned )
{
	// Set up data structures for IDENTIFY command.
	pSCIP->cBufferSize                  = IDENTIFY_BUFFER_SIZE;
	pSCIP->irDriveRegs.bFeaturesReg     = 0;
	pSCIP->irDriveRegs.bSectorCountReg  = 1;
	pSCIP->irDriveRegs.bSectorNumberReg = 1;
	pSCIP->irDriveRegs.bCylLowReg       = 0;
	pSCIP->irDriveRegs.bCylHighReg      = 0;
	
	// calc the drive number.
	pSCIP->irDriveRegs.bDriveHeadReg = 0xA0 | ( ( bDriveNum & 1 ) << 4 );

	// The command can either be IDE identify or ATAPI identify.
	pSCIP->irDriveRegs.bCommandReg = bIDCmd;
	pSCIP->bDriveNumber = bDriveNum;
	pSCIP->cBufferSize = IDENTIFY_BUFFER_SIZE;
	
	return DeviceIoControl( hPhysicalDriveIOCTL, DFP_RECEIVE_DRIVE_DATA,
		( LPVOID ) pSCIP,
		sizeof( SENDCMDINPARAMS ) - 1,
		( LPVOID ) pSCOP,
		sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE - 1,
		lpcbBytesReturned, NULL );
}

BOOL WinNTHDSerialNumASPhysicalRead( BYTE* dwSerial, UINT* puSerialLen, UINT uMaxSerialLen )
{
#define  DFP_GET_VERSION          0x00074080
	BOOL bInfoLoaded = FALSE;

	for( UINT uDrive = 0; uDrive < 4; ++ uDrive )
	{
		HANDLE hPhysicalDriveIOCTL = 0;

		//  Try to get a handle to PhysicalDrive IOCTL, report failure
		//  and exit if can't.
		char szDriveName [256];
		sprintf( szDriveName, "\\\\.\\PhysicalDrive%d", uDrive );

		//  Windows NT, Windows 2000, must have admin rights
		hPhysicalDriveIOCTL = CreateFile( szDriveName,
			GENERIC_READ | GENERIC_WRITE, 
			FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
			OPEN_EXISTING, 0, NULL);

		if( hPhysicalDriveIOCTL != INVALID_HANDLE_VALUE )
		{
			GETVERSIONOUTPARAMS VersionParams = { 0 };
			DWORD               cbBytesReturned = 0;

			// Get the version, etc of PhysicalDrive IOCTL
			if( DeviceIoControl( hPhysicalDriveIOCTL, DFP_GET_VERSION,
				NULL, 
				0,
				&VersionParams,
				sizeof( GETVERSIONOUTPARAMS ),
				&cbBytesReturned, NULL ) )
			{
				// If there is a IDE device at number "i" issue commands
				// to the device
				if( VersionParams.bIDEDeviceMap != 0 )
				{
					BYTE             bIDCmd = 0;   // IDE or ATAPI IDENTIFY cmd
					SENDCMDINPARAMS  scip = { 0 };

					// Now, get the ID sector for all IDE devices in the system.
					// If the device is ATAPI use the IDE_ATAPI_IDENTIFY command,
					// otherwise use the IDE_ATA_IDENTIFY command
					bIDCmd = ( VersionParams.bIDEDeviceMap >> uDrive & 0x10 ) ? IDE_ATAPI_IDENTIFY : IDE_ATA_IDENTIFY;
					BYTE IdOutCmd[sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE - 1] = { 0 };

					if( DoIdentify( hPhysicalDriveIOCTL, 
						&scip, 
						( PSENDCMDOUTPARAMS )&IdOutCmd, 
						( BYTE )bIDCmd,
						( BYTE )uDrive,
						&cbBytesReturned ) )
					{