{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.2 Build 151 09/26/2007 SJ Full Version " "Info: Version 7.2 Build 151 09/26/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Mon Nov 26 13:25:49 2007 " "Info: Processing started: Mon Nov 26 13:25:49 2007" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off Block1 -c Block1 " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off Block1 -c Block1" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "Block1 EP1C3T144C8 " "Info: Selected device EP1C3T144C8 for design \"Block1\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Info" "ICUT_CUT_YGR_PLL_CAN_ACHIEVE_RATIO_AND_PHASE_SHIFT" "kkk:inst\|altpll:altpll_component\|pll " "Info: Implementing parameter values for PLL \"kkk:inst\|altpll:altpll_component\|pll\"" { { "Info" "ICUT_CUT_YGR_PLL_PARAMETERS_FACTORS" "kkk:inst\|altpll:altpll_component\|_clk0 6 5 0 0 " "Info: Implementing clock multiplication of 6, clock division of 5, and phase shift of 0 degrees (0 ps) for kkk:inst\|altpll:altpll_component\|_clk0 port" {  } {  } 0 0 "Implementing clock multiplication of %2!d!, clock division of %3!d!, and phase shift of %4!d! degrees (%5!d! ps) for %1!s! port" 0 0 "" 0}  } { { "altpll.tdf" "" { Text "c:/quartus/libraries/megafunctions/altpll.tdf" 895 3 0 } } { "kkk.vhd" "" { Text "D:/Documents and Settings/yyy/桌面/yue/kkk.vhd" 129 0 0 } } { "Block1.bdf" "" { Schematic "D:/Documents and Settings/yyy/桌面/yue/Block1.bdf" { { 40 160 400 200 "inst" "" } } } }  } 0 0 "Implementing parameter values for PLL \"%1!s!\"" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_TOP" "2 0 " "Info: The Fitter has identified 2 logical partitions of which 0 have a previous placement to use" { { "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_NONE_OVERRIDE" "200 Top " "Info: Previous placement does not exist for 200 of 200 atoms in partition Top" {  } {  } 0 0 "Previous placement does not exist for %1!d! of %1!d! atoms in partition %2!s!" 0 0 "" 0} { "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_NONE_OVERRIDE" "106 sld_hub:sld_hub_inst " "Info: Previous placement does not exist for 106 of 106 atoms in partition sld_hub:sld_hub_inst" {  } {  } 0 0 "Previous placement does not exist for %1!d! of %1!d! atoms in partition %2!s!" 0 0 "" 0}  } {  } 0 0 "The Fitter has identified %1!d! logical partitions of which %2!d! have a previous placement to use" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C6T144C8 " "Info: Device EP1C6T144C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "2 " "Info: Fitter converted 2 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 12 " "Info: Pin ~nCSO~ is reserved at location 12" {  } { { "c:/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 25 " "Info: Pin ~ASDO~ is reserved at location 25" {  } { { "c:/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_USER_OPTIMIZATION_GOALS" "" "Info: Detected fmax, tsu, tco, and/or tpd requirements -- optimizing circuit to achieve only the specified requirements" {  } {  } 0 0 "Detected fmax, tsu, tco, and/or tpd requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources" {  } {  } 0 0 "DQS I/O pins require %1!d! global routing resources" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_PLL_CLK_PROMOTION" "" "Info: Promoted PLL clock signals" { { "Info" "IFYGR_FYGR_PLL_PROMOTE_GCLK_USER" "kkk:inst\|altpll:altpll_component\|_clk0 " "Info: Promoted signal \"kkk:inst\|altpll:altpll_component\|_clk0\" to use global clock (user assigned)" {  } { { "c:/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/quartus/bin/Assignment Editor.qase" 1 { { 0 "kkk:inst\|altpll:altpll_component\|_clk0" } } } } { "Block1.bdf" "" { Schematic "D:/Documents and Settings/yyy/桌面/yue/Block1.bdf" { { 40 160 400 200 "inst" "" } } } } { "altpll.tdf" "" { Text "c:/quartus/libraries/megafunctions/altpll.tdf" 585 3 0 } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { kkk:inst|altpll:altpll_component|_clk0 } "NODE_NAME" } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { kkk:inst|altpll:altpll_component|_clk0 } "NODE_NAME" } }  } 0 0 "Promoted signal \"%1!s!\" to use global clock (user assigned)" 0 0 "" 0}  } {  } 0 0 "Promoted PLL clock signals" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "PLL Placement Operation " "Info: Completed PLL Placement Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "altera_internal_jtag~TCKUTAP Global clock " "Info: Automatically promoted signal \"altera_internal_jtag~TCKUTAP\" to use Global clock" {  } { { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { altera_internal_jtag~TDO } "NODE_NAME" } } { "c:/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/quartus/bin/TimingClosureFloorplan.fld" "" "" { altera_internal_jtag~TDO } "NODE_NAME" } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "" 0}