$NOMOD51
;------------------------------------------------------------------------------
;  This file is part of the C51 Compiler package
;  Copyright (c) 1988-2001 Keil Elektronik GmbH and Keil Software, Inc.
;  Startup code for Dallas 390/5240 CPU, Contigious Mode
;------------------------------------------------------------------------------
;  START390.A51:  This code is executed after processor reset.
;  You may add this file to a uVision2 project.
;
;  To translate this file use A51 with the following invocation:
;
;     AX51 START390.A51 MOD_CONT
;
;  To link the modified STARTUP.OBJ file to your application use the following
;  LX51 invocation:
;
;     LX51 <your object file list>, START390.OBJ <controls>
;
;------------------------------------------------------------------------------
;
; Chip Specific Options 
;
; SA: Ext1nd Stack Address Mode Enable (ACON.2)
SA   EQU 0  ; 0 = 8051 compatible stack in IDATA memory
;           ; 1 = Use 1KB stack in on-chip XDATA space
;
; IDM1, IDM0:  Internal Data Memory Configuration Bits (MCON.7, MCON.6)
IDM  EQU 0  ; 0 = 4KB on-chip SRAM location X:0x00F000 - X:0x00FFFF
;           ; 1 = 4KB on-chip SRAM location X:0x000000 - X:0x000FFF
;           ; 2 = 4KB on-chip SRAM location X:0x400000 - X:0x400FFF
;           ; 3 = 4KB on-chip SRAM location X:0x400000 - X:0x400FFF
;                 and code memory C:0x400000 - C:0x400FFF
;
; CMA: CAN Data Memory Assignment (MCON.5)
CMA  EQU 0  ; 0 = CAN0 X:0x00EE00 - X:0x00EEFF, CAN1 X:0x00EF00 - X:0x00EFFF
            ; 1 = CAN0 X:0x401000 - X:0x4010FF, CAN1 X:0x401100 - X:0x4011FF
;
; PDCE3 .. PDCE0: Program/Data Chip Enable (MCON.3, MCON.2, MCON.1, MCON.0)
; Program/Data Chip Enable selects whether the CEx signal functions as the chip 
; enable for external program memory only (PDCE=0), or as a merged chip enable 
; for program and data memory (PDCE=1).
PDCE3 EQU 1 ; PDCE3=0: standard:      RD signal for MOVX
            ; PDCE3=1: von-Neumann: PSEN signal for MOVX
PDCE2 EQU 1 ; PDCE2=0: standard:      RD signal for MOVX
            ; PDCE2=1: von-Neumann: PSEN signal for MOVX
PDCE1 EQU 1 ; PDCE1=0: standard:      RD signal for MOVX
            ; PDCE1=1: von-Neumann: PSEN signal for MOVX
PDCE0 EQU 1 ; PDCE0=0: standard:      RD signal for MOVX
            ; PDCE0=1: von-Neumann: PSEN signal for MOVX

; Port 4 Function Control (P4CNT)
; ===============================
; Port 4 Pin Function (P4CNT.0 .. P4CNT.2)
P4PF EQU 7  ; 0 : all pin used as I/O pin (P4.0 - P4.3)
;           ; 4 : P4.0 is CE0
;           ; 5 : P4.0 is CE0, P4.1 is CE1
;           ; 6 : P4.0 is CE0, P4.1 is CE1, P4.2 is CE2
;           ; 7 : P4.0 is CE0, P4.1 is CE1, P4.2 is CE2, P4.3 is CE3
;
; Program Memory Chip Enable Window Size (P4CNT.5 .. P4CNT.3)
PCES EQU 7  ; 0 = 32KB  address window (0 - 0x7FFF)
;           ; 4 = 128KB address window (0 - 0x1FFFF)
;           ; 5 = 256KB address window (0 - 0x3FFFF)
;           ; 6 = 512KB address window (0 - 0x7FFFF)
;           ; 7 = 1MB   address window (0 - 0xFFFFF)
;
; Single CAN Configuration (P4CNT.6)
SBCAN EQU 0 ; 1 = connects both CAN receive inputs and outputs to P5.0 and P5.1
            ; 0 = both CAN interfaces work on their respective I/O pins

; Port 5 Function Control (P5CNT)
; ===============================
; Serial Port 1 External Connections (P5CNT.5)
SP1EC EQU 1  ; 0 = Serial Port is routed to P1.2/P1.3
;	     ; 1 = Serial Port is routed to P5.2/P5.3
;
; Can I/O Enable (P5CNT.3 .. P5CNT.4)
CX_IO EQU 0  ; 0 = P5.0 - P5.3 used as I/O pins
;            ; 1 = P5.2 & P5.3 used as I/O pins, P5.0 & P5.1 used by CAN0
;            ; 2 = P5.0 & P5.1 used as I/O pins, P5.2 & P5.3 used by CAN1;
;            ; 3 = P5.0 & P5.1 used by CAN0, P5.2 & P5.3 used by CAN1;
;
; Port 5 Pin Function (P5CNT.2 .. P5CNT.0)
P5PF EQU 0  ; 0 : all pin used as I/O pin (P4.4,P5.5-P5.7)
;           ; 4 : P4.4 is PCE0
;           ; 5 : P4.4 is PCE0, P5.5 is PCE1
;           ; 6 : P4.4 is PCE0, P5.5 is PCE1, P5.6 is PCE2
;           ; 7 : P4.4 is PCE0, P5.5 is PCE1, P5.6 is PCE2, P5.7 is PCE3

;
;------------------------------------------------------------------------------
;
;  User-defined Power-On Initialization of Memory
;
;  With the following EQU statements the initialization of memory
;  at processor reset can be defined:
;
;		; the absolute start-address of IDATA memory is always 0
IDATALEN	EQU	080H	; the length of IDATA memory in bytes.
;
XDATASTART	EQU	0F000H	; the absolute start-address of XDATA memory
XDATALEN	EQU	0FFFH	; the length of XDATA memory in bytes.
;
PDATASTART	EQU	0H	; the absolute start-address of PDATA memory
PDATALEN	EQU	0FFH	; the length of PDATA memory in bytes.
;
;  Notes:  The IDATA space overlaps physically the DATA and BIT areas of the
;          8051 CPU. At minimum the memory space occupied from the C51 
;          run-time routines must be set to zero.
;------------------------------------------------------------------------------
;
;  Reentrant Stack Initilization
;
;  The following EQU statements define the stack pointer for reentrant
;  functions and initialized it:
;
;  Stack Space for reentrant functions in the SMALL model.
IBPSTACK	EQU	0	; set to 1 if small reentrant is used.
IBPSTACKTOP	EQU	0F0H+1	; set top of stack to highest location+1.
;
;  Stack Space for reentrant functions in the LARGE model.	
XBPSTACK	EQU	1	; set to 1 if large reentrant is used.
XBPSTACKTOP	EQU	0FFD7H+1; set top of stack to highest location+1.
;
;  Stack Space for reentrant functions in the COMPACT model.	
PBPSTACK	EQU	1	; set to 1 if compact reentrant is used.
PBPSTACKTOP	EQU	0F4FFH+1; set top of stack to highest location+1.
;
;------------------------------------------------------------------------------
;
;  Page Definition for Using the Compact Model with 64 KByte xdata RAM
;
;  The following EQU statements define the xdata page used for pdata
;  variables. The EQU PPAGE must conform with the PPAGE control used
;  in the linker invocation.
;
PPAGEENABLE	EQU	1	; set to 1 if pdata object are used.
PPAGE		EQU	0F4H	; define PPAGE number. 
;
;------------------------------------------------------------------------------

#include <REG390.H>

		NAME	?C_STARTUP


?C_C51STARTUP	SEGMENT   CODE

IF SA = 1
  IF IDM = 0
    
    ?STACK SEGMENT XDATA AT 0F000H
  ENDIF

  IF IDM = 1
    ?STACK SEGMENT XDATA AT 00000H
  ENDIF

  IF IDM = 2
    ?STACK SEGMENT HDATA AT 0400000H
  ENDIF

  IF IDM = 3
    __ERROR__ "Extended Stack not possible when on-chip XRAM is mapped as code & xdata"
  ENDIF

		RSEG	?STACK
		DS	1024
ELSE

?STACK		SEGMENT   IDATA

		RSEG	?STACK
		DS	1
ENDIF

		EXTRN CODE (?C_START)
		PUBLIC	?C_STARTUP

?C_CPURESET?0	SEGMENT CODE OFFS 0
		RSEG	?C_CPURESET?0	

?C_STARTUP 	LABEL	NEAR
		DB	02H	; LJMP in Classic 8051 Mode
		DW	WORD0 STARTUP1
		RSEG	?C_C51STARTUP

STARTUP1:      
	    	
	    	MOV     TA,#0xAA        ; Enable access to P4CNT
        	MOV     TA,#0x55       
P4CNT_VAL EQU (SBCAN SHL 6) OR (PCES SHL 3) OR (P4PF)
		MOV     P4CNT,#P4CNT_VAL

         	MOV     TA,#0xAA        ; Enable access to P5CNT
        	MOV     TA,#0x55       
P5CNT_VAL EQU (SP1EC SHL 5) OR (CX_IO SHL 3) OR (P5PF)
		MOV     P5CNT,#P5CNT_VAL	              



                MOV     TA,#0xAA        ; Enable access to ACON
                MOV     TA,#0x55
ACON_VAL EQU (2 OR (SA SHL 2)) ; 22-bit contigious mode, SA bit
                MOV     ACON,#ACON_VAL

                MOV     TA,#0xAA        ; Enable access to MCON
                MOV     TA,#0x55
MCON_VAL SET (IDM SHL 6) OR (CMA SHL 5) OR (PDCE3 SHL 3) OR (PDCE2 SHL 2)
MCON_VAL SET MCON_VAL OR (PDCE1 SHL 1) OR (PDCE0)
                MOV     MCON,#MCON_VAL


IF IDATALEN <> 0
		MOV	R0,#IDATALEN - 1
		CLR	A
IDATALOOP:	MOV	@R0,A
		DJNZ	R0,IDATALOOP
ENDIF

IF XDATALEN <> 0
		MOV	DPTR,#XDATASTART
		MOV	R7,#BYTE0 (XDATALEN)
  IF (BYTE0 (XDATALEN)) <> 0
		MOV	R6,#(BYTE1 XDATALEN) +1
  ELSE
		MOV	R6,#BYTE1 (XDATALEN)
  ENDIF
  IF (BYTE1 (XDATALEN)) <> 0
		MOV	R5,#(BYTE2 XDATALEN) +1
  ELSE
		MOV	R5,#BYTE2 (XDATALEN)
  ENDIF
		CLR	A
XDATALOOP:	MOVX	@DPTR,A
		INC	DPTR
		DJNZ	R7,XDATALOOP
		DJNZ	R6,XDATALOOP
		DJNZ	R5,XDATALOOP
ENDIF

IF PPAGEENABLE <> 0
		MOV	P2,#PPAGE
                MOV     MXAX,#0
ENDIF

IF PDATALEN <> 0
		MOV	R0,#PDATASTART
		MOV	R7,#LOW (PDATALEN)
		CLR	A
PDATALOOP:	MOVX	@R0,A
		INC	R0
		DJNZ	R7,PDATALOOP
ENDIF

IF IBPSTACK <> 0
EXTRN DATA (?C_IBP)

		MOV	?C_IBP,#LOW IBPSTACKTOP
ENDIF

IF XBPSTACK <> 0
EXTRN DATA (?C_XBP)

		MOV	?C_XBP,#HIGH XBPSTACKTOP
		MOV	?C_XBP+1,#LOW XBPSTACKTOP
ENDIF

IF PBPSTACK <> 0
EXTRN DATA (?C_PBP)
		MOV	?C_PBP,#LOW PBPSTACKTOP
ENDIF

IF SA = 1
		MOV	SP,#BYTE0 (?STACK-1)
		MOV     ESP,#BYTE1 (?STACK-1)
ELSE
		MOV	SP,#?STACK-1
ENDIF
		LJMP	?C_START

		END