?? dsp28_defaultisr.c
字號:
//###########################################################################
//
// FILE: DSP28_DefaultIsr.c
//
// TITLE: DSP28 Device Default Interrupt Service Routines.
//
//###########################################################################
//
// Ver | dd mmm yyyy | Who | Description of changes
// =====|=============|======|===============================================
// 0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
// 0.56| 20 May 2002 | L.H. | No change
// 0.57| 27 May 2002 | L.H. | No change
//###########################################################################
#include "DSP28_Device.h"
//---------------------------------------------------------------------------
// INT13, INT14, NMI, XINT1, XINT2 Default ISRs:
//
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// DATALOG, RTOSINT, EMUINT, RTOS Default ISRs:
//
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// ILLEGAL Instruction Trap ISR:
//
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
asm(" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// USER Traps Default ISRs:
//
interrupt void USER0_ISR(void) // User Defined trap 0
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// ADC Default ISR:
//
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// CPU Timer 0 Default ISR:
//
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
CpuTimer0.InterruptCount++;
#ifdef DAC7724_0_ENABLE
if(tongdao_flag[0] == 1)
{
*DA_PORT0 = xishu1[data_time[0]];
data_time[0]++;
if(data_time[0] == timer_sum[0])
{
data_time[0] = 0;
}
}
#endif
#ifdef DAC7724_1_ENABLE
if(tongdao_flag[1] == 1)
{
*DA_PORT1 = xishu2[data_time[1]];
data_time[1]++;
if(data_time[1] == timer_sum[1])
{
data_time[1] = 0;
}
}
#endif
#ifdef DAC7724_2_ENABLE
if(tongdao_flag[2] == 1)
{
*DA_PORT2 = xishu3[data_time[2]];
data_time[2]++;
if(data_time[2] == timer_sum[2])
{
data_time[2] = 0;
}
}
#endif
#ifdef DAC7724_3_ENABLE
if(tongdao_flag[3] == 1)
{
*DA_PORT3 = xishu4[data_time[3]];
data_time[3]++;
if(data_time[3] >= timer_sum[3])
{
data_time[3] = 0;
}
}
#endif
da_run();
PieCtrl.PIEACK.bit.ACK1 = 1;
EINT;
}
//---------------------------------------------------------------------------
// Watchdog Default ISR:
//
interrupt void WAKEINT_ISR(void) // WD
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only - remove after inserting
// ISR Code
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// EV-A Default ISRs:
//
interrupt void PDPINTA_ISR( void ) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void CMP1INT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void CMP2INT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void CMP3INT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void T1PINT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void T1CINT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void T1UFINT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void T1OFINT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP2;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void T2PINT_ISR(void) // EV-A
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP3;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -