//###########################################################################
//
// FILE:	DSP28_DefaultIsr.c
//
// TITLE:	DSP28 Device Default Interrupt Service Routines.
//
//###########################################################################
//
//  Ver | dd mmm yyyy | Who  | Description of changes
// =====|=============|======|===============================================
//  0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
//  0.56| 20 May 2002 | L.H. | No change
//  0.57| 27 May 2002 | L.H. | No change
//###########################################################################
#include "DSP28_Device.h"

//---------------------------------------------------------------------------
// INT13, INT14, NMI, XINT1, XINT2 Default ISRs:
//
interrupt void INT13_ISR(void)     // INT13 or CPU-Timer1
{
  // Insert ISR Code here
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
     asm ("      ESTOP0");
     for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void INT14_ISR(void)     // CPU-Timer2
{
  // Insert ISR Code here
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
     asm ("      ESTOP0");
     for(;;);
 
  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void NMI_ISR(void)       // Non-maskable interrupt
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void  XINT1_ISR(void)
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}     

interrupt void  XINT2_ISR(void)
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

//---------------------------------------------------------------------------
// DATALOG, RTOSINT, EMUINT, RTOS Default ISRs:
//
interrupt void DATALOG_ISR(void)   // Datalogging interrupt
{
  // Insert ISR Code here
 
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void RTOSINT_ISR(void)   // RTOS interrupt
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void EMUINT_ISR(void)    // Emulation interrupt
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

//---------------------------------------------------------------------------
// ILLEGAL Instruction Trap ISR:
//
interrupt void ILLEGAL_ISR(void)   // Illegal operation TRAP
{
  // Insert ISR Code here
  asm("          ESTOP0");
  for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

//---------------------------------------------------------------------------
// USER Traps Default ISRs:
//
interrupt void USER0_ISR(void)     // User Defined trap 0
{
 // Insert ISR Code here
 
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER1_ISR(void)     // User Defined trap 1
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER2_ISR(void)     // User Defined trap 2
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void USER3_ISR(void)     // User Defined trap 3
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void USER4_ISR(void)     // User Defined trap 4
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER5_ISR(void)     // User Defined trap 5
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER6_ISR(void)     // User Defined trap 6
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER7_ISR(void)     // User Defined trap 7
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void USER8_ISR(void)     // User Defined trap 8
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void USER9_ISR(void)     // User Defined trap 9
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void USER10_ISR(void)    // User Defined trap 10
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void USER11_ISR(void)    // User Defined trap 11
{
  // Insert ISR Code here

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;

}

//---------------------------------------------------------------------------
// ADC Default ISR: 
//
interrupt void  ADCINT_ISR(void)     // ADC
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP1; 
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

//---------------------------------------------------------------------------
// CPU Timer 0 Default ISR: 
//
interrupt void  TINT0_ISR(void)      // CPU-Timer 0
{
	CpuTimer0.InterruptCount++;
#ifdef DAC7724_0_ENABLE	
	if(tongdao_flag[0] == 1)
	{
	    *DA_PORT0 = xishu1[data_time[0]];
	    data_time[0]++;
	    if(data_time[0] == timer_sum[0])
	    {
	    	data_time[0] = 0;
	    }
	}
#endif
#ifdef DAC7724_1_ENABLE	
	if(tongdao_flag[1] == 1)
	{
	    *DA_PORT1 = xishu2[data_time[1]];
	    data_time[1]++;
	    if(data_time[1] == timer_sum[1])
	    {
	    	data_time[1] = 0;
	    }
	}
#endif
#ifdef DAC7724_2_ENABLE		
	if(tongdao_flag[2] == 1)
	{
	    *DA_PORT2 = xishu3[data_time[2]];
	    data_time[2]++;
	    if(data_time[2] == timer_sum[2])
	    {
	    	data_time[2] = 0;
	    }	
	}
#endif
#ifdef DAC7724_3_ENABLE		
	if(tongdao_flag[3] == 1)
	{
	    *DA_PORT3 = xishu4[data_time[3]];
	    data_time[3]++;
	    if(data_time[3] >= timer_sum[3])
	    {
	    	data_time[3] = 0;
	    }
	}
#endif	
	da_run();
	PieCtrl.PIEACK.bit.ACK1 = 1;
	EINT;
}

//---------------------------------------------------------------------------
// Watchdog Default ISR: 
//
interrupt void  WAKEINT_ISR(void)    // WD
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP1; 
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
   

  // Uncomment this line after adding ISR Code 
  // return;
}

//---------------------------------------------------------------------------
// EV-A Default ISRs: 
//
interrupt void PDPINTA_ISR( void )    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP1;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);
   
  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void CMP1INT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void CMP2INT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);
   
  // Uncomment this line after adding ISR Code 
  // return;

}

interrupt void CMP3INT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void T1PINT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void T1CINT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void T1UFINT_ISR(void)   // EV-A
{
  // Insert ISR Code here

   
  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;
  
  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}

interrupt void T1OFINT_ISR(void)   // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);

  // Uncomment this line after adding ISR Code 
  // return;
}
      
interrupt void T2PINT_ISR(void)     // EV-A
{
  // Insert ISR Code here

  // To recieve more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrl.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only - remove after inserting
  // ISR Code
   asm ("      ESTOP0");
   for(;;);