亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

? 歡迎來到蟲蟲下載站! | ?? 資源下載 ?? 資源專輯 ?? 關于我們
? 蟲蟲下載站

?? cf_fft_1024_8.vhd.bak

?? VHDL 的FFT 1024點源碼。既有VHDL 的
?? BAK
?? 第 1 頁 / 共 5 頁
字號:
----  Copyright (c) 2003 Launchbird Design Systems, Inc.--  All rights reserved.--  --  Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:--    Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.--    Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.--  --  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,--  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.--  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,--  OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;--  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT--  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.--  --  --  Overview:--  --    Performs a radix 2 Fast Fourier Transform.--    The FFT architecture is pipelined on a rank basis; each rank has its own butterfly and ranks are--    isolated from each other using memory interleavers.  This FFT can perform calcualations on continuous--    streaming data (one data set right after another).  More over, inputs and outputs are passed in pairs,--    doubling the bandwidth.  For instance, a 2048 point FFT can perform a transform every 1024 cycles.--  --  Interface:--  --    Synchronization:--      clock_c  : Clock input.--      enable_i : Synchronous enable.--      reset_i  : Synchronous reset.--  --    Inputs:--      sync_i     : Input sync pulse must occur one frame prior to data input.--      data_0_i   : Input data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_i   : Input data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --    Outputs:--      sync_o     : Output sync pulse occurs one frame before data output.--      data_0_o   : Output data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_o   : Output data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --  Built In Parameters:--  --    FFT Points   = 1024--    Precision    = 8--  --  --  --  --  Generated by Confluence 0.6.3  --  Launchbird Design Systems, Inc.  --  www.launchbird.com--  --  Build Date : Fri Aug 22 08:42:00 CDT 2003--  --  Interface--  --    Build Name    : cf_fft_1024_8--    Clock Domains : clock_c  --    Vector Input  : enable_i(1)--    Vector Input  : reset_i(1)--    Vector Input  : sync_i(1)--    Vector Input  : data_0_i(16)--    Vector Input  : data_1_i(16)--    Vector Output : sync_o(1)--    Vector Output : data_0_o(16)--    Vector Output : data_1_o(16)--  --  --  library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_39 isport (clock_c : in std_logic;i1 : in  unsigned(15 downto 0);i2 : in  unsigned(15 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);o1 : out unsigned(15 downto 0);o2 : out unsigned(15 downto 0));end entity cf_fft_1024_8_39;architecture rtl of cf_fft_1024_8_39 issignal n1 : unsigned(15 downto 0) := "0000000000000000";signal n2 : unsigned(7 downto 0);signal n3 : unsigned(7 downto 0);signal n4 : unsigned(15 downto 0) := "0000000000000000";signal n5 : unsigned(7 downto 0);signal n6 : unsigned(7 downto 0);signal n7 : unsigned(7 downto 0) := "00000000";signal n8 : unsigned(7 downto 0) := "00000000";signal n9 : unsigned(7 downto 0) := "00000000";signal n10 : unsigned(7 downto 0) := "00000000";signal n11 : unsigned(15 downto 0) := "0000000000000000";signal n12 : unsigned(7 downto 0);signal n13 : unsigned(7 downto 0);signal n14 : unsigned(15 downto 0);signal n15 : unsigned(7 downto 0);signal n16 : unsigned(7 downto 0) := "00000000";signal n17 : unsigned(15 downto 0);signal n18 : unsigned(7 downto 0);signal n19 : unsigned(7 downto 0) := "00000000";signal n20 : unsigned(7 downto 0);signal n21 : unsigned(7 downto 0) := "00000000";signal n22 : unsigned(15 downto 0);signal n23 : unsigned(7 downto 0);signal n24 : unsigned(7 downto 0) := "00000000";signal n25 : unsigned(15 downto 0);signal n26 : unsigned(7 downto 0);signal n27 : unsigned(7 downto 0) := "00000000";signal n28 : unsigned(7 downto 0);signal n29 : unsigned(7 downto 0) := "00000000";signal n30 : unsigned(7 downto 0);signal n31 : unsigned(7 downto 0);signal n32 : unsigned(15 downto 0);signal n33 : unsigned(15 downto 0) := "0000000000000000";signal n34 : unsigned(7 downto 0);signal n35 : unsigned(7 downto 0);signal n36 : unsigned(15 downto 0);signal n37 : unsigned(15 downto 0) := "0000000000000000";beginprocess (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n1 <= "0000000000000000";    elsif i4 = "1" then      n1 <= i1;    end if;  end if;end process;n2 <= n1(15 downto 15) &  n1(14 downto 14) &  n1(13 downto 13) &  n1(12 downto 12) &  n1(11 downto 11) &  n1(10 downto 10) &  n1(9 downto 9) &  n1(8 downto 8);n3 <= n1(7 downto 7) &  n1(6 downto 6) &  n1(5 downto 5) &  n1(4 downto 4) &  n1(3 downto 3) &  n1(2 downto 2) &  n1(1 downto 1) &  n1(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n4 <= "0000000000000000";    elsif i4 = "1" then      n4 <= i2;    end if;  end if;end process;n5 <= n4(15 downto 15) &  n4(14 downto 14) &  n4(13 downto 13) &  n4(12 downto 12) &  n4(11 downto 11) &  n4(10 downto 10) &  n4(9 downto 9) &  n4(8 downto 8);n6 <= n4(7 downto 7) &  n4(6 downto 6) &  n4(5 downto 5) &  n4(4 downto 4) &  n4(3 downto 3) &  n4(2 downto 2) &  n4(1 downto 1) &  n4(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n7 <= "00000000";    elsif i4 = "1" then      n7 <= n2;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n8 <= "00000000";    elsif i4 = "1" then      n8 <= n7;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n9 <= "00000000";    elsif i4 = "1" then      n9 <= n3;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n10 <= "00000000";    elsif i4 = "1" then      n10 <= n9;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then     if i4 = "1" then      case i3 is        when "0" => n11 <= "0111111100000000";        when "1" => n11 <= "0000000010000000";        when others => n11 <= "XXXXXXXXXXXXXXXX";      end case;    end if;  end if;end process;n12 <= n11(15 downto 15) &  n11(14 downto 14) &  n11(13 downto 13) &  n11(12 downto 12) &  n11(11 downto 11) &  n11(10 downto 10) &  n11(9 downto 9) &  n11(8 downto 8);n13 <= n11(7 downto 7) &  n11(6 downto 6) &  n11(5 downto 5) &  n11(4 downto 4) &  n11(3 downto 3) &  n11(2 downto 2) &  n11(1 downto 1) &  n11(0 downto 0);n14 <= unsigned(signed(n5) * signed(n12));n15 <= n14(14 downto 14) &  n14(13 downto 13) &  n14(12 downto 12) &  n14(11 downto 11) &  n14(10 downto 10) &  n14(9 downto 9) &  n14(8 downto 8) &  n14(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n16 <= "00000000";    elsif i4 = "1" then      n16 <= n15;    end if;  end if;end process;n17 <= unsigned(signed(n6) * signed(n13));n18 <= n17(14 downto 14) &  n17(13 downto 13) &  n17(12 downto 12) &  n17(11 downto 11) &  n17(10 downto 10) &  n17(9 downto 9) &  n17(8 downto 8) &  n17(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n19 <= "00000000";    elsif i4 = "1" then      n19 <= n18;    end if;  end if;end process;n20 <= n16 - n19;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n21 <= "00000000";    elsif i4 = "1" then      n21 <= n20;    end if;  end if;end process;n22 <= unsigned(signed(n5) * signed(n13));n23 <= n22(14 downto 14) &  n22(13 downto 13) &  n22(12 downto 12) &  n22(11 downto 11) &  n22(10 downto 10) &  n22(9 downto 9) &  n22(8 downto 8) &  n22(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n24 <= "00000000";    elsif i4 = "1" then      n24 <= n23;    end if;  end if;end process;n25 <= unsigned(signed(n6) * signed(n12));n26 <= n25(14 downto 14) &  n25(13 downto 13) &  n25(12 downto 12) &  n25(11 downto 11) &  n25(10 downto 10) &  n25(9 downto 9) &  n25(8 downto 8) &  n25(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n27 <= "00000000";    elsif i4 = "1" then      n27 <= n26;    end if;  end if;end process;n28 <= n24 + n27;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n29 <= "00000000";    elsif i4 = "1" then      n29 <= n28;    end if;  end if;end process;n30 <= n8 + n21;n31 <= n10 + n29;n32 <= n30 & n31;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n33 <= "0000000000000000";    elsif i4 = "1" then      n33 <= n32;    end if;  end if;end process;n34 <= n8 - n21;n35 <= n10 - n29;n36 <= n34 & n35;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n37 <= "0000000000000000";    elsif i4 = "1" then      n37 <= n36;    end if;  end if;end process;o2 <= n37;o1 <= n33;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_38 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_38;architecture rtl of cf_fft_1024_8_38 issignal n1 : unsigned(2 downto 0);signal n2 : unsigned(2 downto 0);signal n3 : unsigned(2 downto 0);signal n4 : unsigned(0 downto 0);signal n5 : unsigned(0 downto 0);signal n6 : unsigned(0 downto 0);signal n7 : unsigned(0 downto 0);signal n8 : unsigned(0 downto 0);signal n9 : unsigned(0 downto 0);beginn1 <= "001";n2 <= "011";n3 <= "101";n4 <= "1" when i5 = n1 else "0";n5 <= "1" when i5 = n2 else "0";n6 <= "1" when i5 = n3 else "0";n7 <= i2 when n6 = "1" else i1;n8 <= i3 when n5 = "1" else n7;n9 <= i4 when n4 = "1" else n8;o1 <= n9;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_37 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);i6 : in  unsigned(0 downto 0);i7 : in  unsigned(0 downto 0);i8 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_37;architecture rtl of cf_fft_1024_8_37 is

?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频
色综合中文字幕国产| 丝袜美腿亚洲色图| 全国精品久久少妇| 国内久久精品视频| 欧美在线制服丝袜| 国产日产欧美一区| 日韩成人伦理电影在线观看| 国产麻豆精品在线观看| 欧美日韩视频第一区| 国产亚洲一二三区| 日韩精品国产精品| 成人动漫一区二区三区| 91精品国产综合久久精品| 欧美韩日一区二区三区四区| 亚洲综合一区二区| 99久久99久久免费精品蜜臀| 久久久久国产精品厨房| 亚洲成人综合网站| 成人国产精品免费| 精品国产制服丝袜高跟| 亚洲一区二区三区精品在线| 五月激情综合色| www.在线成人| 久久久久久久综合狠狠综合| 日韩二区在线观看| 欧美日韩小视频| 一区二区三区资源| 免费不卡在线视频| 欧美日韩国产bt| 日本强好片久久久久久aaa| 欧美日韩三级视频| 亚洲成人一区二区在线观看| 欧美在线三级电影| 三级成人在线视频| 91精品国产色综合久久久蜜香臀| 亚洲天堂福利av| 在线一区二区三区四区五区| 国产精品区一区二区三| 国产一区二区三区免费在线观看| 欧美色大人视频| 免费日本视频一区| 日韩一级高清毛片| 亚洲午夜成aⅴ人片| 99精品视频中文字幕| 成人欧美一区二区三区视频网页| 一本色道a无线码一区v| 亚洲成人精品在线观看| 6080国产精品一区二区| 狠狠色综合日日| 亚洲国产精品99久久久久久久久| 91麻豆免费看片| 欧美经典一区二区| 激情综合色综合久久| 久久久国际精品| 不卡视频在线看| 丝袜诱惑亚洲看片| 久久丝袜美腿综合| 欧美性受xxxx黑人xyx| 久久99久久精品欧美| 国产精品久久久久久亚洲毛片| 91免费看视频| 蜜桃久久久久久| 国产精品福利一区| 日韩免费福利电影在线观看| 99久久国产综合色|国产精品| 亚洲成人免费视| 中文字幕日本不卡| 精品999久久久| 在线播放亚洲一区| 99久久精品国产导航| 精品在线播放午夜| 亚洲激情一二三区| 国产精品色噜噜| 精品少妇一区二区三区视频免付费 | 91在线观看污| 紧缚奴在线一区二区三区| 中文av字幕一区| 日韩欧美中文字幕一区| 在线亚洲+欧美+日本专区| 丰满亚洲少妇av| 极品少妇xxxx偷拍精品少妇| 最新热久久免费视频| 国产亚洲综合av| 久久久青草青青国产亚洲免观| 精品成人佐山爱一区二区| 欧美一区二区三区电影| 欧美成人高清电影在线| 欧美日韩精品系列| 一区二区三区中文字幕精品精品 | 天天综合色天天| 天天综合网天天综合色| 蜜臀精品久久久久久蜜臀| 久久国产精品99精品国产| 国产一区二区三区电影在线观看 | 91精品国产综合久久香蕉麻豆 | 精品少妇一区二区三区在线视频| 久久综合久久综合久久综合| 国产日产欧美一区| 艳妇臀荡乳欲伦亚洲一区| 美脚の诱脚舐め脚责91| 成人高清免费在线播放| 欧美日韩国产一级| 国产欧美精品国产国产专区| 亚洲最大色网站| 国产一区不卡精品| 欧美色图天堂网| 久久久精品人体av艺术| 亚洲一二三四区不卡| 国产专区综合网| 91福利国产精品| 日本一区二区三区在线观看| 亚洲成av人片一区二区三区 | 久久久综合视频| 亚州成人在线电影| 成人精品国产免费网站| 日韩一区二区免费在线观看| 亚洲色图20p| 国产馆精品极品| 日韩欧美中文一区| 亚洲18影院在线观看| 99v久久综合狠狠综合久久| 精品久久久久香蕉网| 三级久久三级久久| 欧美日韩精品一二三区| 亚洲精品成a人| 99在线精品免费| 国产精品午夜春色av| 国内成人自拍视频| 日韩美女视频在线| 日本特黄久久久高潮 | 青青草原综合久久大伊人精品优势| 99久久精品免费精品国产| 在线观看亚洲专区| 椎名由奈av一区二区三区| 精品一区二区三区影院在线午夜| 欧美剧在线免费观看网站| 亚洲午夜久久久久久久久久久 | 亚洲日本va午夜在线影院| 国产成人午夜精品影院观看视频| 久久五月婷婷丁香社区| 精品一区二区免费在线观看| 日韩精品专区在线影院观看| 久久综合综合久久综合| 日韩视频国产视频| 国产一区二区三区精品欧美日韩一区二区三区 | 久久精品这里都是精品| 国产成人免费在线观看| 亚洲人精品午夜| 欧美在线免费观看亚洲| 欧美aaaaaa午夜精品| 亚洲精品一线二线三线| 成人久久久精品乱码一区二区三区| 国产精品久久久久影院亚瑟| 一本到不卡精品视频在线观看| 亚洲一区二区在线视频| 欧美mv日韩mv国产网站| 99精品国产视频| 天天色综合成人网| 国产喷白浆一区二区三区| 日本黄色一区二区| 久久精品国产成人一区二区三区| 国产喷白浆一区二区三区| 日本韩国一区二区| 国产一区三区三区| 亚洲综合色噜噜狠狠| 精品免费一区二区三区| 色婷婷亚洲一区二区三区| 人人狠狠综合久久亚洲| 中文字幕一区日韩精品欧美| 5858s免费视频成人| 99视频精品在线| 中文字幕av一区二区三区免费看 | 麻豆极品一区二区三区| 一区在线观看视频| 亚洲精品一区二区在线观看| 色噜噜狠狠成人中文综合| 国产乱对白刺激视频不卡| 亚洲一区二区三区国产| 国产精品久久久久天堂| 26uuu欧美日本| 日韩一区二区不卡| 欧美日韩成人一区二区| 日本韩国欧美一区二区三区| 成人中文字幕在线| 国产一区二区在线免费观看| 日本欧美大码aⅴ在线播放| 亚洲狠狠爱一区二区三区| 亚洲欧美日韩中文播放| 国产精品嫩草影院av蜜臀| 国产日韩三级在线| 欧美激情综合网| 中文字幕欧美国产| 久久色.com| 欧美国产精品一区二区三区| 久久久久综合网| 中文无字幕一区二区三区| 国产丝袜欧美中文另类| 国产欧美日韩三级| 中文字幕在线不卡国产视频| 最新日韩av在线|