亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

? 歡迎來到蟲蟲下載站! | ?? 資源下載 ?? 資源專輯 ?? 關于我們
? 蟲蟲下載站

?? cf_fft_1024_8.vhd

?? VHDL 的FFT 1024點源碼。既有VHDL 的
?? VHD
?? 第 1 頁 / 共 5 頁
字號:
----  Copyright (c) 2003 Launchbird Design Systems, Inc.--  All rights reserved.--  --  Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:--    Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.--    Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.--  --  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,--  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.--  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,--  OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;--  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT--  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.--  --  --  Overview:--  --    Performs a radix 2 Fast Fourier Transform.--    The FFT architecture is pipelined on a rank basis; each rank has its own butterfly and ranks are--    isolated from each other using memory interleavers.  This FFT can perform calcualations on continuous--    streaming data (one data set right after another).  More over, inputs and outputs are passed in pairs,--    doubling the bandwidth.  For instance, a 2048 point FFT can perform a transform every 1024 cycles.--  --  Interface:--  --    Synchronization:--      clock_c  : Clock input.--      enable_i : Synchronous enable.--      reset_i  : Synchronous reset.--  --    Inputs:--      sync_i     : Input sync pulse must occur one frame prior to data input.--      data_0_i   : Input data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_i   : Input data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --    Outputs:--      sync_o     : Output sync pulse occurs one frame before data output.--      data_0_o   : Output data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_o   : Output data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --  Built In Parameters:C--  --    FFT Points   = 1024--    Precision    = 8--  --  --  --  --  Generated by Confluence 0.6.3  --  Launchbird Design Systems, Inc.  --  www.launchbird.com--  --  Build Date : Fri Aug 22 08:42:00 CDT 2003--  --  Interface--  --    Build Name    : cf_fft_1024_8--    Clock Domains : clock_c  --    Vector Input  : enable_i(1)--    Vector Input  : reset_i(1)--    Vector Input  : sync_i(1)--    Vector Input  : data_0_i(16)--    Vector Input  : data_1_i(16)--    Vector Output : sync_o(1)--    Vector Output : data_0_o(16)--    Vector Output : data_1_o(16)--  --  --  library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_39 isport (clock_c : in std_logic;i1 : in  unsigned(15 downto 0);i2 : in  unsigned(15 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);o1 : out unsigned(15 downto 0);o2 : out unsigned(15 downto 0));end entity cf_fft_1024_8_39;architecture rtl of cf_fft_1024_8_39 issignal n1 : unsigned(15 downto 0) := "0000000000000000";signal n2 : unsigned(7 downto 0);signal n3 : unsigned(7 downto 0);signal n4 : unsigned(15 downto 0) := "0000000000000000";signal n5 : unsigned(7 downto 0);signal n6 : unsigned(7 downto 0);signal n7 : unsigned(7 downto 0) := "00000000";signal n8 : unsigned(7 downto 0) := "00000000";signal n9 : unsigned(7 downto 0) := "00000000";signal n10 : unsigned(7 downto 0) := "00000000";signal n11 : unsigned(15 downto 0) := "0000000000000000";signal n12 : unsigned(7 downto 0);signal n13 : unsigned(7 downto 0);signal n14 : unsigned(15 downto 0);signal n15 : unsigned(7 downto 0);signal n16 : unsigned(7 downto 0) := "00000000";signal n17 : unsigned(15 downto 0);signal n18 : unsigned(7 downto 0);signal n19 : unsigned(7 downto 0) := "00000000";signal n20 : unsigned(7 downto 0);signal n21 : unsigned(7 downto 0) := "00000000";signal n22 : unsigned(15 downto 0);signal n23 : unsigned(7 downto 0);signal n24 : unsigned(7 downto 0) := "00000000";signal n25 : unsigned(15 downto 0);signal n26 : unsigned(7 downto 0);signal n27 : unsigned(7 downto 0) := "00000000";signal n28 : unsigned(7 downto 0);signal n29 : unsigned(7 downto 0) := "00000000";signal n30 : unsigned(7 downto 0);signal n31 : unsigned(7 downto 0);signal n32 : unsigned(15 downto 0);signal n33 : unsigned(15 downto 0) := "0000000000000000";signal n34 : unsigned(7 downto 0);signal n35 : unsigned(7 downto 0);signal n36 : unsigned(15 downto 0);signal n37 : unsigned(15 downto 0) := "0000000000000000";beginprocess (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n1 <= "0000000000000000";    elsif i4 = "1" then      n1 <= i1;    end if;  end if;end process;n2 <= n1(15 downto 15) &  n1(14 downto 14) &  n1(13 downto 13) &  n1(12 downto 12) &  n1(11 downto 11) &  n1(10 downto 10) &  n1(9 downto 9) &  n1(8 downto 8);n3 <= n1(7 downto 7) &  n1(6 downto 6) &  n1(5 downto 5) &  n1(4 downto 4) &  n1(3 downto 3) &  n1(2 downto 2) &  n1(1 downto 1) &  n1(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n4 <= "0000000000000000";    elsif i4 = "1" then      n4 <= i2;    end if;  end if;end process;n5 <= n4(15 downto 15) &  n4(14 downto 14) &  n4(13 downto 13) &  n4(12 downto 12) &  n4(11 downto 11) &  n4(10 downto 10) &  n4(9 downto 9) &  n4(8 downto 8);n6 <= n4(7 downto 7) &  n4(6 downto 6) &  n4(5 downto 5) &  n4(4 downto 4) &  n4(3 downto 3) &  n4(2 downto 2) &  n4(1 downto 1) &  n4(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n7 <= "00000000";    elsif i4 = "1" then      n7 <= n2;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n8 <= "00000000";    elsif i4 = "1" then      n8 <= n7;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n9 <= "00000000";    elsif i4 = "1" then      n9 <= n3;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n10 <= "00000000";    elsif i4 = "1" then      n10 <= n9;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then     if i4 = "1" then      case i3 is        when "0" => n11 <= "0111111100000000";        when "1" => n11 <= "0000000010000000";        when others => n11 <= "XXXXXXXXXXXXXXXX";      end case;    end if;  end if;end process;n12 <= n11(15 downto 15) &  n11(14 downto 14) &  n11(13 downto 13) &  n11(12 downto 12) &  n11(11 downto 11) &  n11(10 downto 10) &  n11(9 downto 9) &  n11(8 downto 8);n13 <= n11(7 downto 7) &  n11(6 downto 6) &  n11(5 downto 5) &  n11(4 downto 4) &  n11(3 downto 3) &  n11(2 downto 2) &  n11(1 downto 1) &  n11(0 downto 0);n14 <= unsigned(signed(n5) * signed(n12));n15 <= n14(14 downto 14) &  n14(13 downto 13) &  n14(12 downto 12) &  n14(11 downto 11) &  n14(10 downto 10) &  n14(9 downto 9) &  n14(8 downto 8) &  n14(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n16 <= "00000000";    elsif i4 = "1" then      n16 <= n15;    end if;  end if;end process;n17 <= unsigned(signed(n6) * signed(n13));n18 <= n17(14 downto 14) &  n17(13 downto 13) &  n17(12 downto 12) &  n17(11 downto 11) &  n17(10 downto 10) &  n17(9 downto 9) &  n17(8 downto 8) &  n17(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n19 <= "00000000";    elsif i4 = "1" then      n19 <= n18;    end if;  end if;end process;n20 <= n16 - n19;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n21 <= "00000000";    elsif i4 = "1" then      n21 <= n20;    end if;  end if;end process;n22 <= unsigned(signed(n5) * signed(n13));n23 <= n22(14 downto 14) &  n22(13 downto 13) &  n22(12 downto 12) &  n22(11 downto 11) &  n22(10 downto 10) &  n22(9 downto 9) &  n22(8 downto 8) &  n22(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n24 <= "00000000";    elsif i4 = "1" then      n24 <= n23;    end if;  end if;end process;n25 <= unsigned(signed(n6) * signed(n12));n26 <= n25(14 downto 14) &  n25(13 downto 13) &  n25(12 downto 12) &  n25(11 downto 11) &  n25(10 downto 10) &  n25(9 downto 9) &  n25(8 downto 8) &  n25(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n27 <= "00000000";    elsif i4 = "1" then      n27 <= n26;    end if;  end if;end process;n28 <= n24 + n27;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n29 <= "00000000";    elsif i4 = "1" then      n29 <= n28;    end if;  end if;end process;n30 <= n8 + n21;n31 <= n10 + n29;n32 <= n30 & n31;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n33 <= "0000000000000000";    elsif i4 = "1" then      n33 <= n32;    end if;  end if;end process;n34 <= n8 - n21;n35 <= n10 - n29;n36 <= n34 & n35;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n37 <= "0000000000000000";    elsif i4 = "1" then      n37 <= n36;    end if;  end if;end process;o2 <= n37;o1 <= n33;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_38 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_38;architecture rtl of cf_fft_1024_8_38 issignal n1 : unsigned(2 downto 0);signal n2 : unsigned(2 downto 0);signal n3 : unsigned(2 downto 0);signal n4 : unsigned(0 downto 0);signal n5 : unsigned(0 downto 0);signal n6 : unsigned(0 downto 0);signal n7 : unsigned(0 downto 0);signal n8 : unsigned(0 downto 0);signal n9 : unsigned(0 downto 0);beginn1 <= "001";n2 <= "011";n3 <= "101";n4 <= "1" when i5 = n1 else "0";n5 <= "1" when i5 = n2 else "0";n6 <= "1" when i5 = n3 else "0";n7 <= i2 when n6 = "1" else i1;n8 <= i3 when n5 = "1" else n7;n9 <= i4 when n4 = "1" else n8;o1 <= n9;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_37 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);i6 : in  unsigned(0 downto 0);i7 : in  unsigned(0 downto 0);i8 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_37;architecture rtl of cf_fft_1024_8_37 is

?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频
日韩欧美亚洲国产精品字幕久久久| 国产精品99久久不卡二区| 国产欧美一区二区精品婷婷| 日韩欧美精品在线视频| 欧美日韩视频在线一区二区| 欧美色中文字幕| 欧美日韩综合一区| 欧美日韩二区三区| 欧美另类videos死尸| 欧美人体做爰大胆视频| 制服丝袜激情欧洲亚洲| 日韩三级中文字幕| 久久看人人爽人人| 国产免费成人在线视频| 亚洲欧美在线观看| 亚洲色图欧洲色图| 伊人夜夜躁av伊人久久| 婷婷开心激情综合| 韩日精品视频一区| av电影一区二区| 欧美少妇一区二区| 26uuuu精品一区二区| 中文乱码免费一区二区| 亚洲男人电影天堂| 免费日本视频一区| gogo大胆日本视频一区| 欧美午夜理伦三级在线观看| 日韩欧美成人午夜| 中文字幕在线视频一区| 婷婷激情综合网| 粉嫩欧美一区二区三区高清影视 | 日韩精品电影在线观看| 激情综合色播五月| 色综合色狠狠综合色| 欧美一区二区在线免费播放| 国产欧美在线观看一区| 亚洲国产一区在线观看| 国产成人精品免费一区二区| 92国产精品观看| 日韩一卡二卡三卡四卡| 国产精品日产欧美久久久久| 五月天丁香久久| 波多野结衣亚洲一区| 欧美一级黄色录像| 中文字幕制服丝袜一区二区三区| 天堂在线一区二区| 成人福利在线看| 7777精品伊人久久久大香线蕉的 | 国产亚洲一二三区| 亚洲国产精品嫩草影院| 国产成人夜色高潮福利影视| 欧美精品 日韩| 亚洲激情第一区| 成人免费va视频| 久久久久九九视频| 免费的成人av| 欧美日韩亚洲综合| 一区二区三区在线观看动漫| 高清免费成人av| 欧美tickling挠脚心丨vk| 首页综合国产亚洲丝袜| 在线亚洲免费视频| 亚洲视频一二三| 成人免费va视频| 中文字幕乱码亚洲精品一区| 国产精选一区二区三区| 精品国产乱码久久久久久免费| 五月天精品一区二区三区| 日本韩国一区二区| 亚洲精选一二三| 99精品视频在线免费观看| 中文av字幕一区| 波多野结衣的一区二区三区| 国产亚洲欧美中文| 国产精品一区不卡| 国产亚洲1区2区3区| 国产精品资源在线看| 国产亚洲短视频| 国产黄色精品网站| 国产精品欧美久久久久一区二区| 国产91在线看| 最好看的中文字幕久久| 91视视频在线观看入口直接观看www| 国产色91在线| 成人免费看视频| **性色生活片久久毛片| 99久久精品免费| 亚洲国产日产av| 欧美酷刑日本凌虐凌虐| 久久草av在线| 欧美国产一区在线| 91久久一区二区| 日av在线不卡| 精品国产一区久久| 成人免费观看av| 亚洲一区二区三区自拍| 欧美一区二区视频免费观看| 国产老肥熟一区二区三区| 国产精品女人毛片| 欧美性极品少妇| 国产一区二区三区综合| 亚洲色图一区二区| 9191国产精品| 国产成人av电影在线观看| 亚洲一区二区三区小说| 欧美xxx久久| 色婷婷亚洲精品| 韩国av一区二区三区四区| 国产精品美女久久久久久久久久久| 日本韩国一区二区| 九色|91porny| 一区二区三区精品视频在线| 久久这里只有精品首页| 日本精品裸体写真集在线观看| 免费在线观看日韩欧美| 亚洲视频每日更新| 精品成人佐山爱一区二区| 一本色道**综合亚洲精品蜜桃冫| 日本特黄久久久高潮| 久久蜜桃一区二区| 欧美三级电影在线观看| 风间由美一区二区三区在线观看| 日韩成人免费在线| 亚洲乱码国产乱码精品精98午夜 | 丁香亚洲综合激情啪啪综合| 亚洲国产一二三| 国产精品美日韩| 26uuu久久综合| 亚洲视频你懂的| 亚洲aaa精品| 亚洲欧美日韩小说| 久久久久久一级片| 日韩免费视频线观看| 欧美视频在线一区| 99在线精品免费| 国产高清精品久久久久| 三级不卡在线观看| 亚洲国产精品一区二区尤物区| 亚洲欧洲精品一区二区精品久久久 | 久久成人久久爱| 日韩高清一区二区| 亚洲国产成人tv| 亚洲综合一二区| 亚洲美女电影在线| 国产精品久久久久四虎| 欧美激情在线看| 国产亚洲精品中文字幕| 日韩精品一区二区三区老鸭窝| 69p69国产精品| 69av一区二区三区| 日韩欧美国产三级| 欧美一区二区三区人| 欧美日韩国产成人在线免费| 欧美人体做爰大胆视频| 欧美精品久久一区| 欧美一区二区三区四区久久| 欧美一区二区三区四区高清| 制服丝袜成人动漫| 日韩欧美激情在线| 久久奇米777| 国产精品情趣视频| 亚洲视频一区二区在线| 亚洲一区欧美一区| 日韩制服丝袜av| 久久电影网站中文字幕| 韩国视频一区二区| 成人夜色视频网站在线观看| 欧美艳星brazzers| 欧美日韩大陆一区二区| 91精品国产麻豆| 久久午夜免费电影| 综合久久久久久久| 丝袜亚洲另类欧美综合| 久久国产精品72免费观看| 国产一区二区三区四区五区美女| 成人激情午夜影院| 国产视频亚洲色图| 国产在线播放一区| 国产一区不卡在线| 国产91丝袜在线播放九色| 91免费在线看| 欧美精品亚洲一区二区在线播放| 欧美电影免费观看高清完整版在线 | 久热成人在线视频| 国产91精品久久久久久久网曝门| av在线播放成人| 欧美日韩亚洲综合一区| 久久综合久久久久88| 亚洲欧洲美洲综合色网| 日韩国产在线一| 波多野结衣中文字幕一区二区三区| 在线观看www91| 亚洲精品一区二区精华| 亚洲人成电影网站色mp4| 免费观看成人av| 在线精品观看国产| 欧美国产激情一区二区三区蜜月 | 精品国精品国产| 亚洲专区一二三| 国产91富婆露脸刺激对白|