亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

? 歡迎來到蟲蟲下載站! | ?? 資源下載 ?? 資源專輯 ?? 關于我們
? 蟲蟲下載站

?? cf_fft_1024_8.vhd

?? VHDL 的FFT 1024點源碼。既有VHDL 的
?? VHD
?? 第 1 頁 / 共 5 頁
字號:
----  Copyright (c) 2003 Launchbird Design Systems, Inc.--  All rights reserved.--  --  Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:--    Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.--    Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.--  --  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,--  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.--  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,--  OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;--  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT--  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.--  --  --  Overview:--  --    Performs a radix 2 Fast Fourier Transform.--    The FFT architecture is pipelined on a rank basis; each rank has its own butterfly and ranks are--    isolated from each other using memory interleavers.  This FFT can perform calcualations on continuous--    streaming data (one data set right after another).  More over, inputs and outputs are passed in pairs,--    doubling the bandwidth.  For instance, a 2048 point FFT can perform a transform every 1024 cycles.--  --  Interface:--  --    Synchronization:--      clock_c  : Clock input.--      enable_i : Synchronous enable.--      reset_i  : Synchronous reset.--  --    Inputs:--      sync_i     : Input sync pulse must occur one frame prior to data input.--      data_0_i   : Input data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_i   : Input data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --    Outputs:--      sync_o     : Output sync pulse occurs one frame before data output.--      data_0_o   : Output data 0.  Width is 2 * precision.  Real on the left, imag on the right.--      data_1_o   : Output data 1.  Width is 2 * precision.  Real on the left, imag on the right.--  --  Built In Parameters:C--  --    FFT Points   = 1024--    Precision    = 8--  --  --  --  --  Generated by Confluence 0.6.3  --  Launchbird Design Systems, Inc.  --  www.launchbird.com--  --  Build Date : Fri Aug 22 08:42:00 CDT 2003--  --  Interface--  --    Build Name    : cf_fft_1024_8--    Clock Domains : clock_c  --    Vector Input  : enable_i(1)--    Vector Input  : reset_i(1)--    Vector Input  : sync_i(1)--    Vector Input  : data_0_i(16)--    Vector Input  : data_1_i(16)--    Vector Output : sync_o(1)--    Vector Output : data_0_o(16)--    Vector Output : data_1_o(16)--  --  --  library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_39 isport (clock_c : in std_logic;i1 : in  unsigned(15 downto 0);i2 : in  unsigned(15 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);o1 : out unsigned(15 downto 0);o2 : out unsigned(15 downto 0));end entity cf_fft_1024_8_39;architecture rtl of cf_fft_1024_8_39 issignal n1 : unsigned(15 downto 0) := "0000000000000000";signal n2 : unsigned(7 downto 0);signal n3 : unsigned(7 downto 0);signal n4 : unsigned(15 downto 0) := "0000000000000000";signal n5 : unsigned(7 downto 0);signal n6 : unsigned(7 downto 0);signal n7 : unsigned(7 downto 0) := "00000000";signal n8 : unsigned(7 downto 0) := "00000000";signal n9 : unsigned(7 downto 0) := "00000000";signal n10 : unsigned(7 downto 0) := "00000000";signal n11 : unsigned(15 downto 0) := "0000000000000000";signal n12 : unsigned(7 downto 0);signal n13 : unsigned(7 downto 0);signal n14 : unsigned(15 downto 0);signal n15 : unsigned(7 downto 0);signal n16 : unsigned(7 downto 0) := "00000000";signal n17 : unsigned(15 downto 0);signal n18 : unsigned(7 downto 0);signal n19 : unsigned(7 downto 0) := "00000000";signal n20 : unsigned(7 downto 0);signal n21 : unsigned(7 downto 0) := "00000000";signal n22 : unsigned(15 downto 0);signal n23 : unsigned(7 downto 0);signal n24 : unsigned(7 downto 0) := "00000000";signal n25 : unsigned(15 downto 0);signal n26 : unsigned(7 downto 0);signal n27 : unsigned(7 downto 0) := "00000000";signal n28 : unsigned(7 downto 0);signal n29 : unsigned(7 downto 0) := "00000000";signal n30 : unsigned(7 downto 0);signal n31 : unsigned(7 downto 0);signal n32 : unsigned(15 downto 0);signal n33 : unsigned(15 downto 0) := "0000000000000000";signal n34 : unsigned(7 downto 0);signal n35 : unsigned(7 downto 0);signal n36 : unsigned(15 downto 0);signal n37 : unsigned(15 downto 0) := "0000000000000000";beginprocess (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n1 <= "0000000000000000";    elsif i4 = "1" then      n1 <= i1;    end if;  end if;end process;n2 <= n1(15 downto 15) &  n1(14 downto 14) &  n1(13 downto 13) &  n1(12 downto 12) &  n1(11 downto 11) &  n1(10 downto 10) &  n1(9 downto 9) &  n1(8 downto 8);n3 <= n1(7 downto 7) &  n1(6 downto 6) &  n1(5 downto 5) &  n1(4 downto 4) &  n1(3 downto 3) &  n1(2 downto 2) &  n1(1 downto 1) &  n1(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n4 <= "0000000000000000";    elsif i4 = "1" then      n4 <= i2;    end if;  end if;end process;n5 <= n4(15 downto 15) &  n4(14 downto 14) &  n4(13 downto 13) &  n4(12 downto 12) &  n4(11 downto 11) &  n4(10 downto 10) &  n4(9 downto 9) &  n4(8 downto 8);n6 <= n4(7 downto 7) &  n4(6 downto 6) &  n4(5 downto 5) &  n4(4 downto 4) &  n4(3 downto 3) &  n4(2 downto 2) &  n4(1 downto 1) &  n4(0 downto 0);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n7 <= "00000000";    elsif i4 = "1" then      n7 <= n2;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n8 <= "00000000";    elsif i4 = "1" then      n8 <= n7;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n9 <= "00000000";    elsif i4 = "1" then      n9 <= n3;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n10 <= "00000000";    elsif i4 = "1" then      n10 <= n9;    end if;  end if;end process;process (clock_c) begin  if rising_edge(clock_c) then     if i4 = "1" then      case i3 is        when "0" => n11 <= "0111111100000000";        when "1" => n11 <= "0000000010000000";        when others => n11 <= "XXXXXXXXXXXXXXXX";      end case;    end if;  end if;end process;n12 <= n11(15 downto 15) &  n11(14 downto 14) &  n11(13 downto 13) &  n11(12 downto 12) &  n11(11 downto 11) &  n11(10 downto 10) &  n11(9 downto 9) &  n11(8 downto 8);n13 <= n11(7 downto 7) &  n11(6 downto 6) &  n11(5 downto 5) &  n11(4 downto 4) &  n11(3 downto 3) &  n11(2 downto 2) &  n11(1 downto 1) &  n11(0 downto 0);n14 <= unsigned(signed(n5) * signed(n12));n15 <= n14(14 downto 14) &  n14(13 downto 13) &  n14(12 downto 12) &  n14(11 downto 11) &  n14(10 downto 10) &  n14(9 downto 9) &  n14(8 downto 8) &  n14(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n16 <= "00000000";    elsif i4 = "1" then      n16 <= n15;    end if;  end if;end process;n17 <= unsigned(signed(n6) * signed(n13));n18 <= n17(14 downto 14) &  n17(13 downto 13) &  n17(12 downto 12) &  n17(11 downto 11) &  n17(10 downto 10) &  n17(9 downto 9) &  n17(8 downto 8) &  n17(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n19 <= "00000000";    elsif i4 = "1" then      n19 <= n18;    end if;  end if;end process;n20 <= n16 - n19;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n21 <= "00000000";    elsif i4 = "1" then      n21 <= n20;    end if;  end if;end process;n22 <= unsigned(signed(n5) * signed(n13));n23 <= n22(14 downto 14) &  n22(13 downto 13) &  n22(12 downto 12) &  n22(11 downto 11) &  n22(10 downto 10) &  n22(9 downto 9) &  n22(8 downto 8) &  n22(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n24 <= "00000000";    elsif i4 = "1" then      n24 <= n23;    end if;  end if;end process;n25 <= unsigned(signed(n6) * signed(n12));n26 <= n25(14 downto 14) &  n25(13 downto 13) &  n25(12 downto 12) &  n25(11 downto 11) &  n25(10 downto 10) &  n25(9 downto 9) &  n25(8 downto 8) &  n25(7 downto 7);process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n27 <= "00000000";    elsif i4 = "1" then      n27 <= n26;    end if;  end if;end process;n28 <= n24 + n27;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n29 <= "00000000";    elsif i4 = "1" then      n29 <= n28;    end if;  end if;end process;n30 <= n8 + n21;n31 <= n10 + n29;n32 <= n30 & n31;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n33 <= "0000000000000000";    elsif i4 = "1" then      n33 <= n32;    end if;  end if;end process;n34 <= n8 - n21;n35 <= n10 - n29;n36 <= n34 & n35;process (clock_c) begin  if rising_edge(clock_c) then    if i5 = "1" then      n37 <= "0000000000000000";    elsif i4 = "1" then      n37 <= n36;    end if;  end if;end process;o2 <= n37;o1 <= n33;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_38 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_38;architecture rtl of cf_fft_1024_8_38 issignal n1 : unsigned(2 downto 0);signal n2 : unsigned(2 downto 0);signal n3 : unsigned(2 downto 0);signal n4 : unsigned(0 downto 0);signal n5 : unsigned(0 downto 0);signal n6 : unsigned(0 downto 0);signal n7 : unsigned(0 downto 0);signal n8 : unsigned(0 downto 0);signal n9 : unsigned(0 downto 0);beginn1 <= "001";n2 <= "011";n3 <= "101";n4 <= "1" when i5 = n1 else "0";n5 <= "1" when i5 = n2 else "0";n6 <= "1" when i5 = n3 else "0";n7 <= i2 when n6 = "1" else i1;n8 <= i3 when n5 = "1" else n7;n9 <= i4 when n4 = "1" else n8;o1 <= n9;end architecture rtl;library ieee;use ieee.std_logic_1164.all;use ieee.numeric_std.all;entity cf_fft_1024_8_37 isport (i1 : in  unsigned(0 downto 0);i2 : in  unsigned(0 downto 0);i3 : in  unsigned(0 downto 0);i4 : in  unsigned(0 downto 0);i5 : in  unsigned(0 downto 0);i6 : in  unsigned(0 downto 0);i7 : in  unsigned(0 downto 0);i8 : in  unsigned(2 downto 0);o1 : out unsigned(0 downto 0));end entity cf_fft_1024_8_37;architecture rtl of cf_fft_1024_8_37 is

?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频
国产91精品免费| 欧美一级片在线观看| 欧美精品第一页| 国产精品亲子伦对白| 人人爽香蕉精品| 色综合久久久久综合99| 国产欧美一区二区三区网站| 日韩精品每日更新| 色婷婷综合在线| 日本一区二区三区久久久久久久久不 | 国产精品一区二区久久不卡| 在线观看日韩av先锋影音电影院| 久久久777精品电影网影网 | 7777精品久久久大香线蕉| 综合网在线视频| 精品一区二区免费视频| 日韩精品专区在线影院观看| 亚洲国产高清不卡| 国产精品一区二区久久精品爱涩| 91精品国产综合久久福利| 一区二区欧美在线观看| 91视视频在线直接观看在线看网页在线看| 欧美一级二级在线观看| 亚洲成av人片在线观看无码| 在线观看亚洲a| 亚洲精品自拍动漫在线| 99综合电影在线视频| 日本一区二区三区高清不卡 | 中文字幕高清不卡| 国产激情视频一区二区在线观看| www激情久久| 国产精品123| 国产亚洲一二三区| 国产精品中文欧美| 久久久久久免费| 国产精品99久久久久久久女警 | 日韩成人一级大片| 欧美一区二区三区免费在线看| 亚洲成在人线免费| 欧美人xxxx| 九一九一国产精品| 久久久国产午夜精品| 国产精品白丝av| 日韩一区在线看| 91啪亚洲精品| 亚洲mv在线观看| 欧美一级黄色大片| 国产精品一区二区无线| 国产精品免费视频观看| 91麻豆精品国产91久久久资源速度| 亚洲亚洲人成综合网络| 欧美一二三四在线| 国产一区二区精品久久| 国产精品视频一二三区| 99re热这里只有精品视频| 亚洲综合在线视频| 欧美日韩美女一区二区| 美国欧美日韩国产在线播放| 国产三级精品三级| 91视频精品在这里| 日本美女视频一区二区| 久久精品在线观看| 99热在这里有精品免费| 天天爽夜夜爽夜夜爽精品视频 | 欧美巨大另类极品videosbest | 欧美视频三区在线播放| 久久精品国产亚洲a| 综合在线观看色| 欧美变态tickle挠乳网站| av亚洲精华国产精华| 日韩国产精品久久久| 国产欧美一区视频| 91麻豆精品久久久久蜜臀| 99久精品国产| 成人性色生活片免费看爆迷你毛片| 日韩伦理免费电影| 精品国精品自拍自在线| 色综合天天综合色综合av | 久久久国产午夜精品| 欧美日韩色一区| 成人动漫一区二区在线| 久久国产人妖系列| 亚洲va国产天堂va久久en| 国产欧美久久久精品影院| 91精品国产欧美一区二区成人| 99精品视频中文字幕| 老司机一区二区| 午夜免费久久看| 亚洲欧洲精品一区二区三区不卡| 欧美一区二区播放| 欧美在线不卡视频| 成人国产在线观看| 国产一级精品在线| 免费观看在线综合色| 亚洲一区成人在线| 亚洲另类一区二区| 国产精品国产三级国产有无不卡| 2023国产精品| 欧美成人精品1314www| 欧美丰满少妇xxxxx高潮对白 | 成人av在线资源网| 国产成人aaaa| 国产69精品久久久久毛片| 狠狠色2019综合网| 久久99久久99精品免视看婷婷 | 日av在线不卡| 午夜视频在线观看一区二区三区| 亚洲人成网站影音先锋播放| 日本一区免费视频| 国产精品美女久久久久av爽李琼| 精品va天堂亚洲国产| 精品免费日韩av| 欧美mv和日韩mv国产网站| 国产亲近乱来精品视频| 久久综合色天天久久综合图片| 日韩美女在线视频| 亚洲精品一区二区三区蜜桃下载 | 6080亚洲精品一区二区| 欧美日韩你懂得| 51精品国自产在线| 日韩欧美一区二区在线视频| 日韩欧美中文一区二区| 日韩欧美高清dvd碟片| 欧美xxxx在线观看| 国产农村妇女毛片精品久久麻豆 | 91蜜桃免费观看视频| 91福利国产成人精品照片| 色婷婷精品大在线视频| 欧美午夜电影网| 日韩视频在线观看一区二区| 久久影院午夜论| 亚洲欧美福利一区二区| 天天射综合影视| 国产一本一道久久香蕉| 色综合久久六月婷婷中文字幕| 欧美高清激情brazzers| 精品国免费一区二区三区| 国产精品成人一区二区艾草 | 色av成人天堂桃色av| 欧美日韩精品一区二区| 久久久三级国产网站| 亚洲九九爱视频| 日本女优在线视频一区二区| 国产成人免费视频网站高清观看视频| 97久久人人超碰| 欧美成人女星排行榜| 亚洲人一二三区| 蜜臀va亚洲va欧美va天堂| 岛国精品一区二区| 欧美日韩情趣电影| 国产精品乱码人人做人人爱| 午夜影视日本亚洲欧洲精品| 国产一区 二区| 欧美日韩成人综合天天影院| 久久久99精品免费观看| 亚洲成av人影院| 99riav久久精品riav| 精品对白一区国产伦| 一区二区三区鲁丝不卡| 国产成人免费av在线| 91精品国产综合久久久蜜臀粉嫩| 国产精品传媒视频| 国产一区二区三区免费| 欧美日韩视频在线第一区| 国产精品美女久久久久aⅴ| 日韩黄色小视频| 在线亚洲欧美专区二区| 国产免费久久精品| 久久不见久久见免费视频7| 欧美色欧美亚洲另类二区| 国产欧美一区二区精品性| 麻豆精品国产传媒mv男同| 欧美亚洲高清一区| 日韩伦理av电影| 不卡视频在线看| 久久久精品蜜桃| 激情五月播播久久久精品| 欧美精品v国产精品v日韩精品| 一区二区三区免费| 91在线观看高清| 中文字幕亚洲电影| 国产精品综合av一区二区国产馆| 日韩欧美卡一卡二| 免费观看在线综合| 日韩一区二区三区精品视频| 五月婷婷激情综合网| 欧美视频中文一区二区三区在线观看| 中文字幕第一区第二区| 国产精品一区二区在线看| 久久一区二区三区四区| 九九在线精品视频| 日韩一区二区三区视频在线| 婷婷中文字幕综合| 欧美一级xxx| 精品一区二区三区欧美| 精品国产a毛片| 国产一区二区在线视频| 久久青草欧美一区二区三区| 国产一区二三区| 国产精品久久久久久久久图文区|