?? reg 061.h
字號:
#ifndef __REG_061_h__
#define __REG_061_h__
//-----------------------------------------------------------------------------------
//SPCE061A硬件端口操作頭
//桂林電子工業學院 通信與信息工程系 科技協會
//可以位操作,可以對字節操作,每一個單元(單位為16位的字)可以分為高八位和低八位操作;
//使用方法:下面的硬件寄存器都定義為了UNport結構體型的指針變量;
//端口名->bit.bit0就可以操作端口的第0位;
//端口名->byte.bytel就可以操作端口的低八位;
//端口名->port就可以操作整個端口;
//------------------------------------------------------------------------------------
#define Uint unsigned int
typedef struct
{
Uint bit0 : 1;
Uint bit1 : 1;
Uint bit2 : 1;
Uint bit3 : 1;
Uint bit4 : 1;
Uint bit5 : 1;
Uint bit6 : 1;
Uint bit7 : 1;
Uint bit8 : 1;
Uint bit9 : 1;
Uint bit10 : 1;
Uint bit11 : 1;
Uint bit12 : 1;
Uint bit13 : 1;
Uint bit14 : 1;
Uint bit15 : 1;
}Bit;
typedef struct
{
Uint bytel : 8;
Uint byteh : 8;
}Byte;
typedef struct
{
Uint rsc : 6;
Uint pwm : 4;
Uint others : 6;
}Tunit;
typedef union
{
Bit bit;
Byte byte;
Tunit tunit;
Uint port;
}UNport;
#define PA ((volatile UNport *)(0x7000)) //PA_Data
#define PA_Buffer ((volatile UNport *)(0x7001))
#define PA_Dir ((volatile UNport *)(0x7002))
#define PA_Attrib ((volatile UNport *)(0x7003))
#define PA_Latch ((volatile UNport *)(0x7004))
#define PB ((volatile UNport *)(0x7005)) //PB_Data
#define PB_Buffer ((volatile UNport *)(0x7006))
#define PB_Dir ((volatile UNport *)(0x7007))
#define PB_Attrib ((volatile UNport *)(0x7008))
#define Poscu ((volatile UNport *)(0x7013))
#define Ptbu ((volatile UNport *)(0x700e))
#define Ptbc ((volatile UNport *)(0x700f))
#define Pt0 ((volatile UNport *)(0x700a))
#define Pt1 ((volatile UNport *)(0x700c))
#define Pt0u ((volatile UNport *)(0x700b))
#define Pt1u ((volatile UNport *)(0x700d))
#define Pintu ((volatile UNport *)(0x7010))
#define Pintc ((volatile UNport *)(0x7011))
#define Padm ((volatile UNport *)(0x7014))
#define Padl ((volatile UNport *)(0x702c))
#define Padu ((volatile UNport *)(0x7015))
#define Padmuxu ((volatile UNport *)(0x702b))
#define Pda0 ((volatile UNport *)(0x7017))
#define Pda1 ((volatile UNport *)(0x7016))
#define Pdau ((volatile UNport *)(0x702a))
#define Pwdogc ((volatile UNport *)(0x7012))
#define Pflashu ((volatile UNport *)(0x7555))
#define Watchdog_Clear Pwdogc->port
#define P0_0 PA->bit.bit0
#define P0_1 PA->bit.bit1
#define P0_2 PA->bit.bit2
#define P0_3 PA->bit.bit3
#define P0_4 PA->bit.bit4
#define P0_5 PA->bit.bit5
#define P0_6 PA->bit.bit6
#define P0_7 PA->bit.bit7
#define P0_8 PA->bit.bit8
#define P0_9 PA->bit.bit9
#define P0_10 PA->bit.bit10
#define P0_11 PA->bit.bit11
#define P0_12 PA->bit.bit12
#define P0_13 PA->bit.bit13
#define P0_14 PA->bit.bit14
#define P0_15 PA->bit.bit15
#define P1_0 PB->bit.bit0
#define P1_1 PB->bit.bit1
#define P1_2 PB->bit.bit2
#define P1_3 PB->bit.bit3
#define P1_4 PB->bit.bit4
#define P1_5 PB->bit.bit5
#define P1_6 PB->bit.bit6
#define P1_7 PB->bit.bit7
#define P1_8 PB->bit.bit8
#define P1_9 PB->bit.bit9
#define P1_10 PB->bit.bit10
#define P1_11 PB->bit.bit11
#define P1_12 PB->bit.bit12
#define P1_13 PB->bit.bit13
#define P1_14 PB->bit.bit14
#define P1_15 PB->bit.bit15
#define P0 PA->port
#define P0_Buffer PA_Buffer->port
#define P0_Dir PA_Dir->port
#define P0_Attrib PA_Attrib->port
#define P0_Latch PA_Latch->port
#define P0_Lowbyte PA->byte.bytel
#define P0_Highbyte PA->byte.byteh
#define P0_Dir_Lowbyte PA_Dir->byte.bytel
#define P0_Dir_Highbyte PA_Dir->byte.byteh
#define P0_Attrib_Lowbyte PA_Attrib->byte.bytel
#define P0_Attrib_Highbyte PA_Attrib->byte.byteh
#define P0_Buffer_Lowbyte PA_Buffer->byte.bytel
#define P0_Buffer_Highbyte PA_Buffer->byte.byteh
#define P1 PB->port
#define P1_Buffer PB_Buffer->port
#define P1_Dir PB_Dir->port
#define P1_Attrib PB_Attrib->port
#define P1_Lowbyte PB->byte.bytel
#define P1_Highbyte PB->byte.byteh
#define P1_Dir_Lowbyte PB_Dir->byte.bytel
#define P1_Dir_Highbyte PB_Dir->byte.byteh
#define P1_Attrib_Lowbyte PB_Attrib->byte.bytel
#define P1_Attrib_Highbyte PB_Attrib->byte.byteh
#define OSC_Unit Poscu->port
#define Timebase_Unit Ptbu->port
#define Timebase_Clear Ptbc->port
#define T0 Pt0->port
#define T1 Pt1->port
#define TA_Unit Pt0u->port
#define TB_Unit Pt1u->port
#define INT_Unit Pintu->port
#define INT_Clear Pintc->port
#define AD_Unit Padu->port
#define ADMUX_Unit Padmuxu->port
#define AD_Mic Padm->port
#define AD_Line Padl->port
#define DA_Unit Pdau->port
#define DA0 Pda0->port
#define DA1 Pda1->port
#define Flash_Unit Pflashu->port
#define T0_Unit Pt0u->tunit.rsc
#define T1_Unit Pt1u->tunit.rsc
#define PWM0 Pt0u->tunit.pwm
#define PWM1 Pt1u->tunit.pwm
#define EXT0 PB->bit.bit2
#define EXT1 PB->bit.bit3
#define EXT0_Dir PB_Dir->bit.bit2
#define EXT1_Dir PB_Dir->bit.bit3
#define EXT0_Attrib PB_Attrib->bit.bit2
#define EXT1_Attrib PB_Attrib->bit.bit3
#define UART_Unit1 Puartu1->byte.bytel
#define UART_Unit2 Puartu2->byte.bytel
#define UART Puart->byte.bytel
#define UART_Baud_Low Puartbaudl->byte.bytel
#define UART_Baud_High Puartbaudh->byte.bytel
////////////////iic////////////////////
/*
#define SCK_Dir PB_Dir->bit.bit0
#define SDA_Dir PB_Dir->bit.bit1
#define SCK_Attrib PB_Attrib->bit.bit0
#define SDA_Attrib PB_Attrib->bit.bit1
*/
/*
#define SCK PA->bit.bit0
#define SDA PA->bit.bit1
#define SCK_Dir PA_Dir->bit.bit0
#define SDA_Dir PA_Dir->bit.bit1
#define SCK_Attrib PA_Attrib->bit.bit0
#define SDA_Attrib PA_Attrib->bit.bit1
*/
/////////////////////////////////////////////
#define Rx_Dir PB_Dir->bit.bit7
#define Tx_Dir PB_Dir->bit.bit10
#define Rx_Attrib PB_Attrib->bit.bit7
#define Tx_Attrib PB_Attrib->bit.bit10
#define Rx P1_7
#define Tx P1_10
#define Rx_Int_EN Puartu1->bit.bit7
#define Tx_Int_EN Puartu1->bit.bit6
#define UART_Reset Puartu1->bit.bit5
#define Parity Puartu1->bit.bit3
#define Parity_EN Puartu1->bit.bit7
#define Rx_EM Puartu2->bit.bit7
#define Tx_EM Puartu2->bit.bit6
#define Rx_RDY Puartu2->bit.bit7
#define Tx_RDY Puartu2->bit.bit6
#define UART_FE Puartu2->bit.bit5
#define UART_OE Puartu2->bit.bit4
#define UART_PE Puartu2->bit.bit3
#endif
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -