/* * USB hub driver. * * (C) Copyright 1999 Linus Torvalds * (C) Copyright 1999 Johannes Erdfelt * (C) Copyright 1999 Gregory P. Smith * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au) * */#include <linux/config.h>#include <linux/kernel.h>#include <linux/module.h>#include <linux/completion.h>#include <linux/sched.h>#include <linux/list.h>#include <linux/slab.h>#include <linux/smp_lock.h>#ifdef CONFIG_USB_DEBUG	#define DEBUG#else	#undef DEBUG#endif#include <linux/usb.h>#include <linux/usbdevice_fs.h>#include <asm/semaphore.h>#include <asm/uaccess.h>#include <asm/byteorder.h>#include "hub.h"/* Wakes up khubd */static spinlock_t hub_event_lock = SPIN_LOCK_UNLOCKED;static DECLARE_MUTEX(usb_address0_sem);static LIST_HEAD(hub_event_list);	/* List of hubs needing servicing */static LIST_HEAD(hub_list);		/* List containing all of the hubs (for cleanup) */static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);static int khubd_pid = 0;			/* PID of khubd */static DECLARE_COMPLETION(khubd_exited);#ifdef	DEBUGstatic inline char *portspeed (int portstatus){	if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))    		return "480 Mb/s";	else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))		return "1.5 Mb/s";	else		return "12 Mb/s";}#endif/* USB 2.0 spec Section 11.24.4.5 */static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size){	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),		USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,		USB_DT_HUB << 8, 0, data, size, HZ);}/* * USB 2.0 spec Section 11.24.2.1 */static int usb_clear_hub_feature(struct usb_device *dev, int feature){	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, HZ);}/* * USB 2.0 spec Section 11.24.2.2 * BUG: doesn't handle port indicator selector in high byte of wIndex */static int usb_clear_port_feature(struct usb_device *dev, int port, int feature){	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);}/* * USB 2.0 spec Section 11.24.2.13 * BUG: doesn't handle port indicator selector in high byte of wIndex */static int usb_set_port_feature(struct usb_device *dev, int port, int feature){	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, HZ);}/* * USB 2.0 spec Section 11.24.2.6 */static int usb_get_hub_status(struct usb_device *dev, void *data){	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),		USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,		data, sizeof(struct usb_hub_status), HZ);}/* * USB 2.0 spec Section 11.24.2.7 */static int usb_get_port_status(struct usb_device *dev, int port, void *data){	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),		USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,		data, sizeof(struct usb_hub_status), HZ);}static void hub_irq(struct urb *urb){	struct usb_hub *hub = (struct usb_hub *)urb->context;	unsigned long flags;	/* Cause a hub reset after 10 consecutive errors */	if (urb->status) {		if (urb->status == -ENOENT)			return;		dbg("nonzero status in irq %d", urb->status);		if ((++hub->nerrors < 10) || hub->error)			return;		hub->error = urb->status;	}	hub->nerrors = 0;	/* Something happened, let khubd figure it out */	spin_lock_irqsave(&hub_event_lock, flags);	if (list_empty(&hub->event_list)) {		list_add(&hub->event_list, &hub_event_list);		wake_up(&khubd_wait);	}	spin_unlock_irqrestore(&hub_event_lock, flags);}static void usb_hub_power_on(struct usb_hub *hub){	int i;	/* Enable power to the ports */	dbg("enabling power on all ports");	for (i = 0; i < hub->descriptor->bNbrPorts; i++)		usb_set_port_feature(hub->dev, i + 1, USB_PORT_FEAT_POWER);	/* Wait for power to be enabled */	wait_ms(hub->descriptor->bPwrOn2PwrGood * 2);}#if 0static void usb_hub_port_suspend(struct usb_hub *hub, int port){	usb_set_port_feature(hub->dev, port + 1, USB_PORT_FEAT_SUSPEND);}#endifstatic int usb_hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint){	struct usb_device *dev = hub->dev;	struct usb_hub_status hubstatus;	char portstr[USB_MAXCHILDREN + 1];	unsigned int pipe;	int i, maxp, ret;	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);	if (!hub->descriptor) {		err("Unable to kmalloc %Zd bytes for hub descriptor", sizeof(*hub->descriptor));		return -1;	}	/* Request the entire hub descriptor. */	ret = usb_get_hub_descriptor(dev, hub->descriptor, sizeof(*hub->descriptor));// BUSHI //#ifdef CONFIG_ARCH_S3C2410	if ((dev->devnum == 1)  // Root Hub			&& hub->descriptor->bNbrPorts > CONFIG_MAX_ROOT_PORTS) {		for (i=hub->descriptor->bNbrPorts-1; i>=0; i--) {			printk("port #%d ", i);			if (i > CONFIG_MAX_ROOT_PORTS-1) {//				usb_hub_port_suspend(hub, i);				printk("suspened!\n");			} else {				printk("alived!\n");			}		}		hub->descriptor->bNbrPorts = CONFIG_MAX_ROOT_PORTS;	}#endif/////////		/* <hub->descriptor> is large enough for a hub with 127 ports;		 * the hub can/will return fewer bytes here. */	if (ret < 0) {		err("Unable to get hub descriptor (err = %d)", ret);		kfree(hub->descriptor);		return -1;	}	dev->maxchild = hub->descriptor->bNbrPorts;	info("%d port%s detected", hub->descriptor->bNbrPorts, (hub->descriptor->bNbrPorts == 1) ? "" : "s");	le16_to_cpus(&hub->descriptor->wHubCharacteristics);	if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND)		dbg("part of a compound device");	else		dbg("standalone hub");	switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) {		case 0x00:			dbg("ganged power switching");			break;		case 0x01:			dbg("individual port power switching");			break;		case 0x02:		case 0x03:			dbg("unknown reserved power switching mode");			break;	}	switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) {		case 0x00:			dbg("global over-current protection");			break;		case 0x08:			dbg("individual port over-current protection");			break;		case 0x10:		case 0x18:			dbg("no over-current protection");                        break;	}	switch (dev->descriptor.bDeviceProtocol) {		case 0:			break;		case 1:			dbg("Single TT");			break;		case 2:			dbg("Multiple TT");			break;		default:			dbg("Unrecognized hub protocol %d",				dev->descriptor.bDeviceProtocol);			break;	}	switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {		case 0x00:			if (dev->descriptor.bDeviceProtocol != 0)				dbg("TT requires at most 8 FS bit times");			break;		case 0x20:			dbg("TT requires at most 16 FS bit times");			break;		case 0x40:			dbg("TT requires at most 24 FS bit times");			break;		case 0x60:			dbg("TT requires at most 32 FS bit times");			break;	}	dbg("Port indicators are %s supported", 	    (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) ? "" : "not");	dbg("power on to power good time: %dms", hub->descriptor->bPwrOn2PwrGood * 2);	dbg("hub controller current requirement: %dmA", hub->descriptor->bHubContrCurrent);	for (i = 0; i < dev->maxchild; i++)		portstr[i] = hub->descriptor->DeviceRemovable[((i + 1) / 8)] & (1 << ((i + 1) % 8)) ? 'F' : 'R';	portstr[dev->maxchild] = 0;	dbg("port removable status: %s", portstr);	ret = usb_get_hub_status(dev, &hubstatus);	if (ret < 0) {		err("Unable to get hub status (err = %d)", ret);		kfree(hub->descriptor);		return -1;	}	le16_to_cpus(&hubstatus.wHubStatus);	dbg("local power source is %s",		(hubstatus.wHubStatus & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good");	dbg("%sover-current condition exists",		(hubstatus.wHubStatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");	/* Start the interrupt endpoint */	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));	if (maxp > sizeof(hub->buffer))		maxp = sizeof(hub->buffer);	hub->urb = usb_alloc_urb(0);	if (!hub->urb) {		err("couldn't allocate interrupt urb");		kfree(hub->descriptor);		return -1;	}	FILL_INT_URB(hub->urb, dev, pipe, hub->buffer, maxp, hub_irq,		hub, endpoint->bInterval);	ret = usb_submit_urb(hub->urb);	if (ret) {		err("usb_submit_urb failed (%d)", ret);		kfree(hub->descriptor);		return -1;	}			/* Wake up khubd */	wake_up(&khubd_wait);	usb_hub_power_on(hub);	return 0;}static void *hub_probe(struct usb_device *dev, unsigned int i,		       const struct usb_device_id *id){	struct usb_interface_descriptor *interface;	struct usb_endpoint_descriptor *endpoint;	struct usb_hub *hub;	unsigned long flags;	interface = &dev->actconfig->interface[i].altsetting[0];	/* Some hubs have a subclass of 1, which AFAICT according to the */	/*  specs is not defined, but it works */	if ((interface->bInterfaceSubClass != 0) &&	    (interface->bInterfaceSubClass != 1)) {		err("invalid subclass (%d) for USB hub device #%d",			interface->bInterfaceSubClass, dev->devnum);		return NULL;	}	/* Multiple endpoints? What kind of mutant ninja-hub is this? */	if (interface->bNumEndpoints != 1) {		err("invalid bNumEndpoints (%d) for USB hub device #%d",			interface->bNumEndpoints, dev->devnum);		return NULL;	}	endpoint = &interface->endpoint[0];	/* Output endpoint? Curiousier and curiousier.. */	if (!(endpoint->bEndpointAddress & USB_DIR_IN)) {		err("Device #%d is hub class, but has output endpoint?",			dev->devnum);		return NULL;	}	/* If it's not an interrupt endpoint, we'd better punt! */	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) {		err("Device #%d is hub class, but has endpoint other than interrupt?",			dev->devnum);		return NULL;	}	/* We found a hub */	info("USB hub found");	hub = kmalloc(sizeof(*hub), GFP_KERNEL);	if (!hub) {		err("couldn't kmalloc hub struct");		return NULL;	}	memset(hub, 0, sizeof(*hub));	INIT_LIST_HEAD(&hub->event_list);	hub->dev = dev;	init_MUTEX(&hub->khubd_sem);	/* Record the new hub's existence */	spin_lock_irqsave(&hub_event_lock, flags);	INIT_LIST_HEAD(&hub->hub_list);	list_add(&hub->hub_list, &hub_list);	spin_unlock_irqrestore(&hub_event_lock, flags);	if (usb_hub_configure(hub, endpoint) >= 0)		return hub;	err("hub configuration failed for device #%d", dev->devnum);	/* free hub, but first clean up its list. */	spin_lock_irqsave(&hub_event_lock, flags);	/* Delete it and then reset it */	list_del(&hub->event_list);	INIT_LIST_HEAD(&hub->event_list);	list_del(&hub->hub_list);	INIT_LIST_HEAD(&hub->hub_list);	spin_unlock_irqrestore(&hub_event_lock, flags);	kfree(hub);	return NULL;}static void hub_disconnect(struct usb_device *dev, void *ptr){	struct usb_hub *hub = (struct usb_hub *)ptr;	unsigned long flags;	spin_lock_irqsave(&hub_event_lock, flags);	/* Delete it and then reset it */	list_del(&hub->event_list);	INIT_LIST_HEAD(&hub->event_list);	list_del(&hub->hub_list);	INIT_LIST_HEAD(&hub->hub_list);	spin_unlock_irqrestore(&hub_event_lock, flags);	down(&hub->khubd_sem); /* Wait for khubd to leave this hub alone. */	up(&hub->khubd_sem);	if (hub->urb) {		usb_unlink_urb(hub->urb);		usb_free_urb(hub->urb);		hub->urb = NULL;	}	if (hub->descriptor) {		kfree(hub->descriptor);		hub->descriptor = NULL;	}	/* Free the memory */	kfree(hub);}static int hub_ioctl(struct usb_device *hub, unsigned int code, void *user_data){	/* assert ifno == 0 (part of hub spec) */	switch (code) {	case USBDEVFS_HUB_PORTINFO: {		struct usbdevfs_hub_portinfo *info = user_data;		unsigned long flags;		int i;		spin_lock_irqsave(&hub_event_lock, flags);		if (hub->devnum <= 0)			info->nports = 0;		else {			info->nports = hub->maxchild;			for (i = 0; i < info->nports; i++) {				if (hub->children[i] == NULL)					info->port[i] = 0;				else					info->port[i] = hub->children[i]->devnum;			}		}		spin_unlock_irqrestore(&hub_event_lock, flags);		return info->nports + 1;		}	default:		return -ENOSYS;	}}static int usb_hub_reset(struct usb_hub *hub){	struct usb_device *dev = hub->dev;	int i;	/* Disconnect any attached devices */	for (i = 0; i < hub->descriptor->bNbrPorts; i++) {		if (dev->children[i])			usb_disconnect(&dev->children[i]);	}	/* Attempt to reset the hub */	if (hub->urb)		usb_unlink_urb(hub->urb);	else		return -1;	if (usb_reset_device(dev))		return -1;	hub->urb->dev = dev;                                                    	if (usb_submit_urb(hub->urb))		return -1;	usb_hub_power_on(hub);	return 0;}static void usb_hub_disconnect(struct usb_device *dev){	struct usb_device *parent = dev->parent;	int i;	/* Find the device pointer to disconnect */	if (parent) {		for (i = 0; i < parent->maxchild; i++) {			if (parent->children[i] == dev) {				usb_disconnect(&parent->children[i]);				return;			}		}	}	err("cannot disconnect hub %d", dev->devnum);}#define HUB_RESET_TRIES		5#define HUB_PROBE_TRIES		2#define HUB_SHORT_RESET_TIME	10#define HUB_LONG_RESET_TIME	200#define HUB_RESET_TIMEOUT	500/* return: -1 on error, 0 on success, 1 on disconnect.  */static int usb_hub_port_wait_reset(struct usb_device *hub, int port,