# Makefile - make rules for target/config/s3c2410x## DESCRIPTION# This file contains rules for building VxWorks for the OMU# with an s3c2410x microprocessor module.## INCLUDES#     makeTarget#*/CPU		= ARMARCH4TOOL		= gnuEXTRA_DEFINE	= -Wcomment -DCPU_920T \		  -DARMMMU=ARMMMU_920T -DARMCACHE=ARMCACHE_920TTGT_DIR = $(WIND_BASE)/targetinclude $(TGT_DIR)/h/make/defs.bsp#include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)#include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)## Only redefine make definitions below this point, or your definitions will## be overwritten by the makefile stubs above.TARGET_DIR	= s3c2410xVENDOR		= HITSATBOARD		= OMURELEASE		+= bootrom.bin## The constants ROM_TEXT_ADRS, ROM_SIZE, and RAM_HIGH_ADRS are defined# in config.h and Makefile.# All definitions for these constants must be identical.#ROM_TEXT_ADRS	= 00000000 # ROM entry addressROM_WARM_ADRS	= 00000004 # ROM warm addressROM_SIZE	= 00200000 # number of bytes of ROM spaceRAM_LOW_ADRS	= 30001000 # RAM text/data addressRAM_HIGH_ADRS	= 33e00000 # RAM text/data addressVMA_START	= 0x$(ROM_TEXT_ADRS)# Binary version of VxWorks ROM images, suitable for programming# into Flash using tools provided by ARM.  If other ROM images need to# be put into Flash, add similar rules here.bootrom.bin: bootrom	- @ $(RM) $@	$(EXTRACT_BIN) -O binary bootrom $@bootrom_res.bin: bootrom_res	- @ $(RM) $@	$(EXTRACT_BIN) -O binary bootrom_res $@bootrom_uncmp.bin: bootrom_uncmp	- @ $(RM) $@	$(EXTRACT_BIN) -O binary bootrom_uncmp $@vxWorks_rom.bin: vxWorks_rom	- @ $(RM) $@	$(EXTRACT_BIN) -O binary vxWorks_rom $@vxWorks.st_rom.bin: vxWorks.st_rom	- @ $(RM) $@	$(EXTRACT_BIN) -O binary vxWorks.st_rom $@vxWorks.res_rom.bin: vxWorks.res_rom	- @ $(RM) $@	$(EXTRACT_BIN) -O binary vxWorks.res_rom $@vxWorks.res_rom_nosym.bin: vxWorks.res_rom_nosym	- @ $(RM) $@	$(EXTRACT_BIN) -O binary vxWorks.res_rom_nosym $@## Only redefine make definitions above this point, or the expansion of## makefile target dependencies may be incorrect.include $(TGT_DIR)/h/make/rules.bsp#include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)