README: Wind River SBC8260 (wrSbc8260)This file contains board-specific information for the Wind River SBC8260target board. Specifically, this file contains information on any BSPinterface changes from previous software or hardware versions, andcontains caveats that the user must be aware of before using this BSP.Additionally, the target board's manual page entry (i.e., wrSbc8260/target.nr)provides board-specific information necessary to run VxWorks, andshould be read before this BSP is used.--------------------------------------------------------------------------------RELEASE (1.2/34):        Fix the error handeling problem with the FCC driver.RELEASE (1.2/33):        Make m8260IntrCtl.c local, and fix problem with the error interrupt.RELEASE (1.2/32):        Add sysIOPort.c driver.        Add support for two deferent MAC when using FCC & SCC.RELEASE (1.2/31):        Fix a bug with visionWARE 2.00 support.RELEASE (1.2/30):        Add support to lock code/data in L1 cache.        Rename BSP name to wrSbc8260.        Add TFFS support.        Add support for visionWARE 2.00 .RELEASE (1.2/29):        Fixing a bug in motFccInitMem() in sbcMotFccEnd.c.RELEASE (1.2/28):        Change 'config.h' to support to the new TM driver.        Fixing a bug in sysNvRamInit() in sysLib.c , calling to maloc() in sysNvRamInit()        when it is not allowed.        Change the BSP name to sbc8260 according to the Wind River naming standard.RELEASE (1.2/27):         Detect if we running from RAM or ROM and initialize the Ethernet driver          according to it. RELEASE (1.2/26):        Adding bootrom_res & vxWorks_romResident support.        Updating target.nr on how to support two MAC address, one for etch interface,        and how to create bootrom_res or vxWorks_romResident.RELEASE (1.2/25):        Correct the reset configuration word for 66Mhz        Change the name of the file from 'sbcm8260Intr.c' to 'sbcm8260IntrCtl.c'        Change the "Programming bootrom_uncmp to SBC8260 FLASH" section in the target.nr        to be more readble.        Update 'config.h' to support the Wind River H.S.I the new TM driver        Fixing problem in the function sysAuxClkEnable() in sbcm8260Timer.c         (the Aux clock frequency was incorrect).RELEASE (1.2/24):        Fixing the SDRAM initialization for the 60x and Local bus.        Changing the SDRAM refresh timing to support 66 Mhz input clock        Fixing problem in the function sysTimestampFreq() in sbcm8260Timer.c         (the timestamp clock frequency was incorrect).RELEASE (1.2/23):        Updating target.nr to support 66Mhz. Add instruction to change the DEC_CLK freq.        Rewriting the FCC driver to solve performance problem.        Fixing bug in sysLib.c in function "sysClkRateAdjust"        Changing #include "vxworks.h" to #include "vxWorks.h" in sysNet.h        Adding On Line Help for the BSP in Tornado II        Change version number according to the BSP developer kit standard.RELEASE (2.0/2):        Updating target.nr to support 66Mhz, and checking the BSP with 66Mhz.        Changing the macro "DEFAULT_DEC_CLK_FREQ" in sbcm8260Timer.c to support 66Mhz.RELEASE (2.0/1):        Fixing a bug in sysNet.c in function sysEnetAddrSet(). The MAC address was         save to NvRam in the opposite order.RELEASE (2.0/0):        Adding target.nr file to the BSP directory.