% Program 3-18
% gmsk.m
%
% Simulation program to realize GMSK transmission system
%
% Programmed by R.Sawai and H.Harada
%

%******************** Preparation part *************************************

sr=256000.0; % Symbol rate
ml=1;        % ml:Number of modulation levels 
br=sr.*ml;   % Bit rate
nd = 1000;   % Number of symbols that simulates in each loop
ebn0=5;      % Eb/N0
IPOINT=8;    % Number of oversamples

%************************* Filter initialization ***************************

irfn=21;                  % Number of taps
B=0.25*sr;
B2=0.6*sr;
[xh] = gaussf(B,irfn,IPOINT,sr,1);   %Transmitter filter coefficients 
[xh2] =gaussf(B2,irfn,IPOINT,sr,0);  %Receiver filter coefficients 

%******************** START CALCULATION *************************************

nloop=100;  % Number of simulation loops

noe = 0;    % Number of error data
nod = 0;    % Number of transmitted data

for iii=1:nloop 

%*************************** Data generation ******************************** 
    
    data1=rand(1,nd.*ml)>0.5;  % rand: built in function

%*************************** GMSK Modulation ********************************  

    data11=2*data1-1;
    data2=oversamp(data11,length(data11),IPOINT);    
    data3=conv(data2,xh);                           % NEW for GMSK

    th=zeros(1,length(data3)+1);
    ich2=zeros(1,length(data3)+1);
    qch2=zeros(1,length(data3)+1);

    for ii=2:length(data3)+1
	    th(1,ii)=th(1,ii-1)+pi/2*data3(1,ii-1)./IPOINT;
    end

    ich2=cos(th);
    qch2=sin(th);

%************************** Attenuation Calculation ***********************

    spow=sum(ich2.*ich2+qch2.*qch2)/nd;  % sum: built in function
	attn=0.5*spow*sr/br*10.^(-ebn0/10);
	attn=sqrt(attn);                     % sqrt: built in function
   
%********************** Fading channel **********************

    %[ifade,qfade]=sefade2(data2,qdata1,itau,dlvl1,th1,n0,itnd1,now1,length(data2),fftlen2,fstp,fd,flat);

%********************* Add White Gaussian Noise (AWGN) **********************
	
    [ich3,qch3]= comb(ich2,qch2,attn);% add white gaussian noise
	  
    [ich4,qch4] = compconv(ich3,qch3,xh2);
   
    syncpoint =irfn*IPOINT-IPOINT/2+1;
    ich5=ich4(syncpoint:IPOINT:length(ich4));
    qch5=qch4(syncpoint:IPOINT:length(qch4));
        
%**************************** GMSK Demodulation *****************************

    demoddata2(1,1)=-1;

    for k=3:2:nd*ml+1
         demoddata2(1,k)=ich5(1,k)*qch5(1,k-1)*cos(pi*(k))>0;
    end

    for n=2:2:nd*ml+1
         demoddata2(1,n)=ich5(1,n-1)*qch5(1,n)*cos(pi*(n))>0;
    end

    [demodata]=demoddata2(1,2:nd*ml+1);
    
%************************** Bit Error Rate (BER) ****************************
	
    noe2=sum(abs(data1-demodata));  % sum: built in function
	nod2=length(data1);  % length: built in function
	noe=noe+noe2;
	nod=nod+nod2;

	fprintf('%d\t%e\n',iii,noe2/nod2);  % fprintf: built in function

end % for iii=1:nloop    

%********************** Output result ***************************

ber = noe/nod;
fprintf('%d\t%d\t%d\t%e\n',ebn0,noe,nod,noe/nod);  % fprintf: built in function
fid = fopen('BERgmsk.dat','a');
fprintf(fid,'%d\t%e\t%f\t%f\t\n',ebn0,noe/nod,noe,nod);  % fprintf: built in function
fclose(fid);

%******************** end of file ***************************