$Id: HOWTO.windows,v 1.1 2003/06/26 17:39:45 idgay Exp $MINI-HOWTO to build and use uisp under cygwin/w32.---------------------------------------------------------------------------------------2002-06-23  Marc Wetzel  <mwse@gmx.de>	* First release. Cygwin part.2002-06-24  Theodore A. Roth  <troth@openavr.org>	* Minor formatting changes.Cygwin:-------Short version:--------------Get uisp-source../bootstrap  (Only needed if you get source from CVS)./configuremakemake installLong version:--------------Install cygwin as explained by redhat <http://sources.redhat.com/cygwin/>Be sure to also install the development tools: GNU-C and GNU-CPP,and don't forget to install 'make', too :)Create a directory e.g. "/home/username/uisp-cvs".  Get the latest cvs source/or snapshot out of savannah.gnu.org into this directory.CVS: <http://savannah.gnu.org/cvs/?group=uisp>  cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/uisp login  <hit just enter for the password>  cvs -z3 -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/uisp co uispCreate the configure script by calling `./bootstrap`.  Now we call`./configure` to create the necessary makefiles depending on your system.Your are ready to type `make && make install` to build UISP.This build will link uisp with the cygwin dll's to provide the unix subsystem(posix layer) on a plain windows box.  See the cygwin site to get a deeperknowledge of it.  But you can use this uisp/w32 by just copying the necessarydll's out of your cygwin directory into the windows\system or system32directory.Necessary are the following 3 dlls:  13.12.2001  11:33            22.016 cygintl-1.dll  22.11.2001  00:16            41.105 cygpcre.dll  25.02.2002  18:16           769.352 cygwin1.dllInstalling the printer-port driver:-----------------------------------Under Windows NT or Windows 2000 you need to install a special driver to getaccess to system resources like the printer port.  A ready to use lpt-driverfor uisp is for example giveio.  One place where GIVEIO is found is e.g. here:<http://irdeo.de/ntdriver.zip>.  Unzip the downloaded file to a location ofyour choice: e.g. "c:\Program Files\Giveio".  Copy the unzipped giveio.sys toyour "winnt\system32\drivers" directory.  Now run the program loaddrv.exe toinstall the driver, you'll have to change the "Full pathname of driver" to thelocation you copied the giveio.sys to:e.g. "C:\WINNT\SYSTEM32\DRIVERS\GIVEIO.SYS".  Now press install, thenstart.  You should see the status change to "Operation was successful" - Nowthe driver is installed.  You should now extend your preferredcompiler-startup-batch e.g. `run.cmd`  with the line `net start giveio` asthis driver is not installed automatically.  Or run the loaddrv.exe (withchanging to the right path) and press the start-button.You could extend your makefiles with the following two lines to have a newrule `make install` to flash the built .rom file into your avr.  Myprogramming-interface is a stk200 compatible one, and I like the hashes to seethat uisp is still working...ISP = C:/PATH-TO-UISP/uisp.exeinstall: $(TARG)		 $(ISP) -v=3 -dprog=stk200 --hash=1024 --erase --upload if=$(TARG).hexMinGW:To be continued...Any comments and/or corrections go to Marc Wetzel: <mailto:mwse@gmx.de>