SERIAL = `echo /dev/tty.KeySerial*`UISP = uisp -dprog=avr910 -dserial=$(SERIAL) -dpart=auto# The two lines above are for "uisp" and the AVR910 serial programmer connected# to a Keyspan USB to serial converter to a Mac running Mac OS X.# Choose your favorite programmer and interface.COMPILE = avr-gcc -Wall -Os -Iusbdrv -I. -mmcu=atmega8 -DDEBUG_LEVEL=0# NEVER compile the final product with debugging! Any debug output will# distort timing so that the specs can't be met.OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o hvprog.o\	isp.o serial.o stk500protocol.o timer.o utils.o vreg.o main.o# symbolic targets:all:	main.hex.c.o:	$(COMPILE) -c $< -o $@.S.o:	$(COMPILE) -x assembler-with-cpp -c $< -o $@# "-x assembler-with-cpp" should not be necessary since this is the default# file type for the .S (with capital S) extension. However, upper case# characters are not always preserved on Windows. To ensure WinAVR# compatibility define the file type manually..c.s:	$(COMPILE) -S $< -o $@flash:	all	$(UISP) --erase --upload --verify if=main.hexboot: all	./avrusbboot main.hex# Fuse high byte:# 0xc9 = 1 1 0 0   1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)#        ^ ^ ^ ^   ^ ^ ^------ BOOTSZ0#        | | | |   | +-------- BOOTSZ1#        | | | |   +---------- EESAVE (don't preserve EEPROM over chip erase)#        | | | +-------------- CKOPT (full output swing)#        | | +---------------- SPIEN (allow serial programming)#        | +------------------ WDTON (WDT not always on)#        +-------------------- RSTDISBL (reset pin is enabled)# Fuse low byte:# 0x9f = 1 0 0 1   1 1 1 1#        ^ ^ \ /   \--+--/#        | |  |       +------- CKSEL 3..0 (external >8M crystal)#        | |  +--------------- SUT 1..0 (crystal osc, BOD enabled)#        | +------------------ BODEN (BrownOut Detector enabled)#        +-------------------- BODLEVEL (2.7V)fuse:	$(UISP) --wr_fuse_h=0xc9 --wr_fuse_l=0x9fread_fuse:	$(UISP) --rd_fusesread_data:	$(UISP) --download --size=8192clean:	rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.bin *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s# file targets:main.bin:	$(OBJECTS)	$(COMPILE) -o main.bin $(OBJECTS)main.hex:	main.bin	rm -f main.hex main.eep.hex	avr-objcopy -j .text -j .data -O ihex main.bin main.hex	./checksize main.bin 8192 1024# do the checksize script as our last action to allow successful compilation# on Windows with WinAVR where the Unix commands will fail.disasm:	main.bin	avr-objdump -d main.bincpp:	$(COMPILE) -E main.c