?? lib_at91rm9200.c
字號:
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg pio to be disabled
{
pPio->PIO_MDDR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_GetMultiDriverStatus
//* \brief Return PIO Multi Driver Status
//*----------------------------------------------------------------------------
unsigned int AT91F_PIO_GetMultiDriverStatus( // \return PIO Multi Driver Status
AT91PS_PIO pPio) // \arg pointer to a PIO controller
{
return pPio->PIO_MDSR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsMultiDriverSet
//* \brief Test if PIO MultiDriver is Set
//*----------------------------------------------------------------------------
int AT91F_PIO_IsMultiDriverSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_PIO_GetMultiDriverStatus(pPio) & flag);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_A_RegisterSelection
//* \brief PIO A Register Selection
//*----------------------------------------------------------------------------
void AT91F_PIO_A_RegisterSelection(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg pio A register selection
{
pPio->PIO_ASR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_B_RegisterSelection
//* \brief PIO B Register Selection
//*----------------------------------------------------------------------------
void AT91F_PIO_B_RegisterSelection(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg pio B register selection
{
pPio->PIO_BSR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_Get_AB_RegisterStatus
//* \brief Return PIO Interrupt Status
//*----------------------------------------------------------------------------
unsigned int AT91F_PIO_Get_AB_RegisterStatus( // \return PIO AB Register Status
AT91PS_PIO pPio) // \arg pointer to a PIO controller
{
return pPio->PIO_ABSR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsAB_RegisterSet
//* \brief Test if PIO AB Register is Set
//*----------------------------------------------------------------------------
int AT91F_PIO_IsAB_RegisterSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_PIO_Get_AB_RegisterStatus(pPio) & flag);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_OutputWriteEnable
//* \brief Output Write Enable PIO
//*----------------------------------------------------------------------------
void AT91F_PIO_OutputWriteEnable(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg pio output write to be enabled
{
pPio->PIO_OWER = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_OutputWriteDisable
//* \brief Output Write Disable PIO
//*----------------------------------------------------------------------------
void AT91F_PIO_OutputWriteDisable(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg pio output write to be disabled
{
pPio->PIO_OWDR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_GetOutputWriteStatus
//* \brief Return PIO Output Write Status
//*----------------------------------------------------------------------------
unsigned int AT91F_PIO_GetOutputWriteStatus( // \return PIO Output Write Status
AT91PS_PIO pPio) // \arg pointer to a PIO controller
{
return pPio->PIO_OWSR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsOutputWriteSet
//* \brief Test if PIO OutputWrite is Set
//*----------------------------------------------------------------------------
int AT91F_PIO_IsOutputWriteSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_PIO_GetOutputWriteStatus(pPio) & flag);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_GetCfgPullup
//* \brief Return PIO Configuration Pullup
//*----------------------------------------------------------------------------
unsigned int AT91F_PIO_GetCfgPullup( // \return PIO Configuration Pullup
AT91PS_PIO pPio) // \arg pointer to a PIO controller
{
return pPio->PIO_PPUSR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsOutputDataStatusSet
//* \brief Test if PIO Output Data Status is Set
//*----------------------------------------------------------------------------
int AT91F_PIO_IsOutputDataStatusSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_PIO_GetOutputDataStatus(pPio) & flag);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsCfgPullupStatusSet
//* \brief Test if PIO Configuration Pullup Status is Set
//*----------------------------------------------------------------------------
int AT91F_PIO_IsCfgPullupStatusSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (~AT91F_PIO_GetCfgPullup(pPio) & flag);
}
/* *****************************************************************************
SOFTWARE API FOR TWI
***************************************************************************** */
//*----------------------------------------------------------------------------
//* \fn AT91F_TWI_EnableIt
//* \brief Enable TWI IT
//*----------------------------------------------------------------------------
void AT91F_TWI_EnableIt (
AT91PS_TWI pTWI, // \arg pointer to a TWI controller
unsigned int flag) // \arg IT to be enabled
{
//* Write to the IER register
pTWI->TWI_IER = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_TWI_DisableIt
//* \brief Disable TWI IT
//*----------------------------------------------------------------------------
void AT91F_TWI_DisableIt (
AT91PS_TWI pTWI, // \arg pointer to a TWI controller
unsigned int flag) // \arg IT to be disabled
{
//* Write to the IDR register
pTWI->TWI_IDR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_TWI_Configure
//* \brief Configure TWI in master mode
//*----------------------------------------------------------------------------
void AT91F_TWI_Configure ( AT91PS_TWI pTWI ) // \arg pointer to a TWI controller
{
//* Disable interrupts
pTWI->TWI_IDR = (unsigned int) -1;
//* Reset peripheral
pTWI->TWI_CR = AT91C_TWI_SWRST;
//* Set Master mode
pTWI->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_TWI_GetInterruptMaskStatus
//* \brief Return TWI Interrupt Mask Status
//*----------------------------------------------------------------------------
unsigned int AT91F_TWI_GetInterruptMaskStatus( // \return TWI Interrupt Mask Status
AT91PS_TWI pTwi) // \arg pointer to a TWI controller
{
return pTwi->TWI_IMR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_TWI_IsInterruptMasked
//* \brief Test if TWI Interrupt is Masked
//*----------------------------------------------------------------------------
int AT91F_TWI_IsInterruptMasked(
AT91PS_TWI pTwi, // \arg pointer to a TWI controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_TWI_GetInterruptMaskStatus(pTwi) & flag);
}
/* *****************************************************************************
SOFTWARE API FOR USART
***************************************************************************** */
//*----------------------------------------------------------------------------
//* \fn AT91F_US_Baudrate
//* \brief Caluculate baud_value according to the main clock and the baud rate
//*----------------------------------------------------------------------------
unsigned int AT91F_US_Baudrate (
const unsigned int main_clock, // \arg peripheral clock
const unsigned int baud_rate) // \arg UART baudrate
{
unsigned int baud_value = ((main_clock*10)/(baud_rate * 16));
if ((baud_value % 10) >= 5)
baud_value = (baud_value / 10) + 1;
else
baud_value /= 10;
return baud_value;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_SetBaudrate
//* \brief Set the baudrate according to the CPU clock
//*----------------------------------------------------------------------------
void AT91F_US_SetBaudrate (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int mainClock, // \arg peripheral clock
unsigned int speed) // \arg UART baudrate
{
//* Define the baud rate divisor register
pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_SetTimeguard
//* \brief Set USART timeguard
//*----------------------------------------------------------------------------
void AT91F_US_SetTimeguard (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int timeguard) // \arg timeguard value
{
//* Write the Timeguard Register
pUSART->US_TTGR = timeguard ;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_EnableIt
//* \brief Enable USART IT
//*----------------------------------------------------------------------------
void AT91F_US_EnableIt (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int flag) // \arg IT to be enabled
{
//* Write to the IER register
pUSART->US_IER = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_DisableIt
//* \brief Disable USART IT
//*----------------------------------------------------------------------------
void AT91F_US_DisableIt (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int flag) // \arg IT to be disabled
{
//* Write to the IER register
pUSART->US_IDR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_Configure
//* \brief Configure USART
//*----------------------------------------------------------------------------
void AT91F_US_Configure (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int mainClock, // \arg peripheral clock
unsigned int mode , // \arg mode Register to be programmed
unsigned int baudRate , // \arg baudrate to be programmed
unsigned int timeguard ) // \arg timeguard to be programmed
{
//* Disable interrupts
pUSART->US_IDR = (unsigned int) -1;
//* Reset receiver and transmitter
pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ;
//* Define the baud rate divisor register
AT91F_US_SetBaudrate(pUSART, mainClock, baudRate);
//* Write the Timeguard Register
AT91F_US_SetTimeguard(pUSART, timeguard);
//* Clear Transmit and Receive Counters
AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR));
//* Define the USART mode
pUSART->US_MR = mode ;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_EnableRx
//* \brief Enable receiving characters
//*----------------------------------------------------------------------------
void AT91F_US_EnableRx (
AT91PS_USART pUSART) // \arg pointer to a USART controller
{
//* Enable receiver
pUSART->US_CR = AT91C_US_RXEN;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_EnableTx
//* \brief Enable sending characters
//*----------------------------------------------------------------------------
void AT91F_US_EnableTx (
AT91PS_USART pUSART) // \arg pointer t?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -