Partially Ordered TODO list:DONE: oprofile1) Fix rmmod to handle module offsets in /proc/modulesDONE: Andi1) Fix new rmmod to set O_SYNCDONE: Petr1) Fix install mess which blows away old modutils sometimes.DONE: Petr2) Dummy insmod -p, -s and -f options.DONE: Modprobe0) Implement modprobe -c (for RH install scripts).DONE: Modprobe5) Implement modules.conf -> modprobe.conf translatorDONE: depmod2) Rewrite depmod so it works with modern kernels.DONE: Kallsyms0) Fix kallsyms in modules bug (Ricky Beam's report)DONE: depmod5) Implement PCI ID support etc.DONE: Modprobe1) Release 0.8	Requires Andi1, oprofile1, depmod1, depmod2, Modprobe0, Petr1, Petr2oprofile2) Fix /proc/modules format	Needs oprofile1oprofile3) Put module location in /proc/modules	Needs oprofile2, Rth7Andi2) Change module->live to module->state, and show in /proc/modulesAndi3) Fix kernel to detect old rmmods (using O_SYNC)	Needs Andi2Misc1) Add truncated module check.Adam1) Don't drop lock when rmmod O_NONBLOCK.depmod1) Return depmod to run at "make modules_install" step.depmod3) Implement .modalias supportdepmod4) Implement symbol: support.Modprobe2) Implement options in modprobe.confModprobe3) Implement install in modprobe.confModprobe4) Release 0.9	Requires Modprobe2 and Modprobe3Kallsyms1) Drop the optimization which checks against addr between _stext and   _etext, as this skips __init functions on most archs.Kallsyms2) Only put in the symbols for functions (currently CONFIG_KALLSYMS=y   adds 400k on my laptop: ouch!).Kallsyms3) Use a simple scheme like the mini-oopser did to reduce the symbol   table size furthur (I got it down to 70k IIRC).Kallsyms4) Speed up prototype script by rewriting in C.Kallsyms5) It'd be nice if CONFIG_KALLSYMS=m worked.Rth0) Stylize Rth's patch (piss in the corners, add Rth's copyright)Rth1) Update modutils to handle rth's RT_DYN patch: extensionsRth2) Update depmod to handle rth's export-symbol stuff.Modprobe6) Release 0.10	Requires Rth2modules_install0) Return to subdirs since mkinitrd needs them	Requires Modprobe1Modprobe7) Restore symbol: support.	Requires depmod4Modprobe8) Restore .modalias support	Requires depmod3Rth3) Update rth's patch to handle ksymoopsRth4) Update rth's patch to handle parametersRth5) Port rth's patch to ppc and ppc64Rth6) Port rth's patch to ia64Rth7) Send rth's patch to Linus	Requires Rth0, Rth1, Rth2, Rth3, Rth4, Modprobe6