;******************************************************************************
;*   COPYRIGHT (C) 2002 TEXAS INSTRUMENTS INCORPORATED.
;*   ALL RIGHTS RESERVED. ONLY USE WITH TEXAS INSTRUMENTS SILICON.
;******************************************************************************
;*
;*   FILE:           UmpUsbXP.INF
;*   SUBSYSTEM:      VCP Devices
;*
;*   ABSTRACT:       Driver Installation file for
;*                   TI's VCP Driver for TUSB3410/TUSB5052, USB module
;*
;* REVISION HISTORY:
;*
;*   STR #   INIT   DATE            SHORT TITLE
;*  [.....]  PJG  08/20/02  Initial revision of win2000/XP....................
;*  [.....]  PJG  10/21/02  Fix Parity and GetCommStatus on reads............
;*  [.....]  DWB  10/30/02  Fix Timeout timing/Win2K UNINSTALL hang..........
;*  [.....]  DWB  17 JUL 03 Create EVM eeprom pid to differentiate GPIO/UART.
;*  [.....]   BK  24 NOV 03 Engr Bld 1.2.10.84 for 2k/XP enum, DUN, etc......
;*  [.....]   BK  22 DEC 03 Engr Bld 1.2.10.85 (*SPECIAL*) floating MSR w/a .
;*                           DSR=DCD=RI=0 whatever FW messages say...........
;*  [.....]   BK  23 DEC 03 Engr Bld 1.2.10.86 (SetMSRLines tags in INF/registry
;*                           control floating MSR w/a in driver.
;*  [.....]   BK  05 JAN 04 Engr Bld 1.2.10.87 Fix COM port assignment
;*  [.....]   BK  14 JAN 04 Engr Bld 1.2.10.88 Fix DUN surprise disconnect
;*  [xxxxx]  JCR  11 FEB 04 Engr Bld 1.2.10.90 Fix race condition on surprise removal
;*  [xxxxx]  JCR  19 FEB 04 Engr Bld 1.2.10.91 Fix the wait for threads......
;*  [xxxxx]   BK  12 JUN 04 Engr Bld 1.2.10.95 INF can set custom port display names
;*  [xxxxx]   BK  07 JUL 04 1.2.10.95 Add PID_505A for EEPROM boot header
;*  [xxxxx]  nnn  dd mmm yy .................................................
;*
;******************************************************************************
;*
[Version]
signature="$WINDOWS NT$"
Class = MultiportSerial
ClassGuid = {50906cb8-ba12-11d1-bf5d-0000f805f530}
Provider=%TIInc%
CatalogFile=UMPUSBXP.cat
;* LayoutFile=LAYOUT.INF
DriverVer   = 11/01/2004,1.2.11.03

[Manufacturer]
%TI.Mfg%=TI.Section

[ControlFlags]
ExcludeFromSelect = *

[SourceDisksNames]
1 = %DiskName%

[SourceDisksFiles]
umpf3410.i51=1
umpf5052.i51=1
umpusbxp.sys=1

[DestinationDirs]
DefaultDestDir=11               ; LDID_SYS

UMPUSB.CopyFiles.NT          = 10, system32\drivers
TI5052.CopyFiles.NT          = 10, system32\drivers
;TI5152.CopyFiles.NT          = 10, system32\drivers
TI3410.CopyFiles.NT          = 10, system32\drivers


;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
;   5052
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI5052.Boot.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT

[TI5052.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT

[TI5052.Boot.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.AddReg.NT.HW

[TI5052.Dev.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.Dev.AddReg.NT.HW

[TI5052.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"

[TI5252.Generic.Addreg.NT.HW]
HKR,,NumComPorts,%REG_DWORD%,2
HKR,,NumLptPorts,%REG_DWORD%,0

[TI5052.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TILDR5052"

[TI5052.Dev.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TIUSB5052"

; Vendor:  In these HWID strings, replace TI VID (0451) and PID (5052) with your own 
; VID/PID.  Or, replace the HWID in quotes with some other name unique to your company 
; and product.  This key is stored in the registry and is also used by Windows Update.  
;HKR,,Port1DeviceHWID,,"VID_0451_5052_com"   ; set to these for common port names  	; <------ TUSB5052 applications
;HKR,,Port2DeviceHWID,,"VID_0451_5052_com"             					; <------ TUSB5052 applications
HKR,,Port1DeviceHWID,,"VID_0451_5052_port1"  ; set to these for different port names 	; <------ TUSB5052 applications
HKR,,Port2DeviceHWID,,"VID_0451_5052_port2" 						; <------ TUSB5052 applications
;



; ****

[TI5052.CopyFiles.NT]
umpf5052.i51


;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
;   3410 -- Unitary driver. Bootloader and driver are same instance.
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI3410.Uni.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT

[TI3410.Uni.NT.HW]
AddReg=TI3410.AddReg.NT.HW

[TI3410.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT

[TI3410.Dev.NT.HW]
AddReg=TI3410.AddReg.NT.HW

[TI3410.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"

[TI3410.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf3410.i51"
HKR,,SetMSRLinesZero,%REG_BINARY%,0x00  ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS
HKR,,SetMSRLinesOne, %REG_BINARY%,0x00  ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS 
HKR,,NumComPorts,%REG_DWORD%,1
HKR,,NumLptPorts,%REG_DWORD%,0
HKR,,TIDeviceType,,"TIUSB3410"
; Release 1.2.10.96: This line sets the Virtual COM Port HW ID  


; Vendor: In this HWID string, replace TI VID (0451) and PID (3410) with your 
; own VID/PID; or, use some other string unique to your company and product.   This
; key is stored in the registry and is also used by Windows Update.   
;HKR,,Port1DeviceHWID,,"VID_0451_3410_com"					; <------------ TUSB3410 applications
HKR,,Port1DeviceHWID,,"MSP_FET430UIF_COM"                                       ; <------------ MSP-FET430UIF
; ****
; This defines the name shown by the Found New HW wizard for the COM port child device:
;HKR,,ComPortChildDeviceText,,"Texas Instruments UMP Serial Port"
HKR,,ComPortChildDeviceText,,"MSP-FET430UIF - Serial Port"


[TI3410.CopyFiles.NT]
umpf3410.i51

[TI3410.Uni.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[TI3410.Dev.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[TI3410.Uni.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[TI3410.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[TI5052.Boot.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[TI5052.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService

[StandardUMPUSB.AddService]
DisplayName    = %StandardUMPUSB.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\umpusbxp.sys
LoadOrderGroup = Base

; =================== Sections ==================================
; NOTE: All 5152 chipset IDs are now aliased to 5052.
[TI.Section]
; Vendor:  In the next line, replace "0451" with your VID, 
; and replace the last occurrence of "3410" with your PID
;%PID_3410.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_3410	  			; <------------ TUSB3410 applications
;%PID_341A.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_341A
%PID_F430.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_F430                          ; <------------ MSP-FET430UIF

%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5052
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_505A
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_505F

%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5152
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_515F

; =================== Global ==================================
[UMPUSB.CopyFiles.NT]
umpusbxp.sys,,,0x00000004

[UMPUSB.DelFiles]

; =================== Strings ==================================

[Strings]
; Vendor:  for each string below, customize for your application
TIInc="Texas Instruments, Inc"                           		; <------------ TUSB3410/TUSB5052 applications
USBClassName="TI UMP Devices"                           		; <------------ TUSB3410/TUSB5052 applications
StandardUMPUSB.SvcDesc="Texas Instruments VCP Device Driver"    	; <------------ TUSB3410/TUSB5052 applications

TI.Mfg="Texas Instruments"                           			; <------------ TUSB3410/TUSB5052 applications

DiskName="TI VCP Installation Disk"                           		; <------------ TUSB3410/TUSB5052 applications

; Vendor:  In the next line, replace 3410 with your PID, and change
; the string
;PID_3410.DeviceDesc="TUSB3410 Device"                           	; <------------ TUSB3410 applications

;PID_341A.DeviceDesc="TUSB3410UART EVM"
PID_F430.DeviceDesc="MSP-FET430UIF (TI USB FET) Adapter"                ; <------------ MSP-FET430UIF

; Vendor:  In the next lines, change the strings
PID_5052.DeviceDesc="TUSB5052 Loader"                           	; <------------ TUSB5052 applications
PID_505F.DeviceDesc="TUSB5052"                           		

REG_BINARY =0x00000001
REG_DWORD  =0x00010001