?? example_28xswprioritizeddefaultisr.c
字號:
#endif
// Connected to PIEIER5_1 (use MINT5 and MG51 masks):
#if (G51PL != 0)
interrupt void T4PINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG51; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0051;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_2 (use MINT5 and MG52 masks):
#if (G52PL != 0)
interrupt void T4CINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG52; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0052;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_3 (use MINT5 and MG53 masks):
#if (G53PL != 0)
interrupt void T4UFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG53; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0053;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_4 (use MINT5 and MG54 masks):
#if (G54PL != 0)
interrupt void T4OFINT_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG54; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0054;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_5 (use MINT5 and MG55 masks):
#if (G55PL != 0)
interrupt void CAPINT4_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG55; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0055;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_6 (use MINT5 and MG56 masks):
#if (G56PL != 0)
interrupt void CAPINT5_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG56; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0056;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER5_7 (use MINT5 and MG57 masks):
#if (G57PL != 0)
interrupt void CAPINT6_ISR(void) // EV-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
IER |= M_INT5;
IER &= MINT5; // Set "global" priority
PieCtrlRegs.PIEIER5.all &= MG57; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER5.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0057;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// McBSP-A Default ISRs:
//
// Connected to PIEIER6_5 (use MINT6 and MG65 masks):
#if (G65PL != 0)
interrupt void MRINTA_ISR(void) // McBSP-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &= MG65; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0065;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER6_6 (use MINT6 and MG66 masks):
#if (G66PL != 0)
interrupt void MXINTA_ISR(void) // McBSP-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &= MG66; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0066;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// SPI-A Default ISRs:
//
// Connected to PIEIER6_1 (use MINT6 and MG61 masks):
#if (G61PL != 0)
interrupt void SPIRXINTA_ISR(void) // SPI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &= MG61; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0061;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER6_2 (use MINT6 and MG62 masks):
#if (G62PL != 0)
interrupt void SPITXINTA_ISR(void) // SPI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
IER |= M_INT6;
IER &= MINT6; // Set "global" priority
PieCtrlRegs.PIEIER6.all &= MG62; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER6.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0062;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// SCI-A Default ISRs:
//
// Connected to PIEIER9_1 (use MINT9 and MG91 masks):
#if (G91PL != 0)
interrupt void SCIRXINTA_ISR(void) // SCI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG91; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0091;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER9_2 (use MINT9 and MG92 masks):
#if (G92PL != 0)
interrupt void SCITXINTA_ISR(void) // SCI-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG92; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0092;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// SCI-B Default ISRs:
//
// Connected to PIEIER9_3 (use MINT9 and MG93 masks):
#if (G93PL != 0)
interrupt void SCIRXINTB_ISR(void) // SCI-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG93; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0093;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER9_4 (use MINT9 and MG94 masks):
#if (G94PL != 0)
interrupt void SCITXINTB_ISR(void) // SCI-B
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG94; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0094;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// eCAN-A Default ISRs:
//
// Connected to PIEIER9_5 (use MINT9 and MG95 masks):
#if (G95PL != 0)
interrupt void ECAN0INTA_ISR(void) // eCAN-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG95; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0095;
ISRTraceIndex++;
}
#endif
// Connected to PIEIER9_6 (use MINT9 and MG96 masks):
#if (G96PL != 0)
interrupt void ECAN1INTA_ISR(void) // eCAN-A
{
// Set interrupt priority:
volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
IER |= M_INT9;
IER &= MINT9; // Set "global" priority
PieCtrlRegs.PIEIER9.all &= MG96; // Set "group" priority
PieCtrlRegs.PIEACK.all = 0xFFFF; // Enable PIE interrupts
EINT;
// Insert ISR Code here.......
for(i = 1; i <= 10; i++) {}
// Restore registers saved:
DINT;
PieCtrlRegs.PIEIER9.all = TempPIEIER;
// Add ISR to Trace
ISRTrace[ISRTraceIndex] = 0x0096;
ISRTraceIndex++;
}
#endif
//---------------------------------------------------------------------------
// Catch All Default ISRs:
//
interrupt void PIE_RESERVED(void) // Interrupt not used default.
{
ESTOP0;
}
interrupt void INT_NOTUSED_ISR(void) // Interrupt not used default.
{
ESTOP0;
}
interrupt void rsvd_ISR(void) // Interrupt reserved default.
{
ESTOP0;
}
//===========================================================================
// No more.
//===========================================================================
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -