//-----------------------------------------------------------------
//  名稱: LGM12864液晶頭文件
//-----------------------------------------------------------------
#define INT8U   unsigned char
#define INT16U  unsigned int
#define INT32U  unsigned long
#define _XTAL_FREQ 4000000UL
//LCD起始行/頁/列指令定義
#define LCD_START_ROW   0xC0       //起始行
#define LCD_PAGE        0xB8       //頁指令
#define LCD_COL         0x40       //列指令
//液晶控制引腳
#define E               RD0        //使能
#define R_W             RD1        //讀寫
#define D_I             RD2        //數據/指令
#define CS1             RD3        //右半屏選擇
#define CS2             RD4        //右半屏選擇
#define RST             RD5        //復位
//忙標志位
#define BUSY_STATUS     RB7        //忙標志位
//液晶端口
#define LCD_PORT        PORTB      //液晶數據端口
#define LCD_DDR         TRISB      //設置數據方向
//待顯示漢字點陣(在ZIMO軟件中取模時,設宋體小四號,縱向取模,字節倒序)
const INT8U DIGIT_Dot_Matrix[] = //0~9,.,-及空格的點陣(8*16)
{
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//.
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//-
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//Space
};
const INT8U WORD_Dot_Matrix[] = //溫度,阻值,℃,Ω的點陣(16*16)
{
/*--  文字:  鉑  --*/
0x40,0x30,0x2C,0xEB,0x28,0x28,0x08,0x00,0xF8,0x88,0x8C,0x8B,0x88,0x88,0xF8,0x00,
0x01,0x01,0x01,0x7F,0x21,0x11,0x09,0x00,0x7F,0x20,0x20,0x20,0x20,0x20,0x7F,0x00,
/*--  文字:  電  --*/
0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,
0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,
/*--  文字:  阻  --*/
0x00,0xFF,0x11,0x29,0xC7,0x01,0xFE,0x22,0x22,0x22,0x22,0x22,0xFE,0x00,0x00,0x00,
0x00,0xFF,0x02,0x04,0x43,0x40,0x7F,0x42,0x42,0x42,0x42,0x42,0x7F,0x40,0x40,0x00,
/*--  文字:  溫  --*/
0x10,0x21,0x86,0x70,0x00,0x7E,0x4A,0x4A,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00,0x00,
0x02,0xFE,0x01,0x40,0x7F,0x41,0x41,0x7F,0x41,0x41,0x7F,0x41,0x41,0x7F,0x40,0x00,
/*--  文字:  度  --*/
0x00,0x00,0xFC,0x04,0x24,0x24,0xFC,0xA5,0xA6,0xA4,0xFC,0x24,0x24,0x24,0x04,0x00,
0x80,0x60,0x1F,0x80,0x80,0x42,0x46,0x2A,0x12,0x12,0x2A,0x26,0x42,0xC0,0x40,0x00,
/*--  文字:  計  --*/
0x20,0x21,0x2E,0xE4,0x00,0x00,0x20,0x20,0x20,0x20,0xFF,0x20,0x20,0x20,0x20,0x00,
0x00,0x00,0x00,0x7F,0x20,0x10,0x08,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,
/*--  文字:  ?  --*/
0x00,0xFE,0xFE,0xFC,0xFC,0xF8,0xF8,0xF0,0xF0,0xF0,0xE0,0xE0,0xC0,0xC0,0x80,0x80,
0x00,0x3F,0x3F,0x1F,0x1F,0x0F,0x0F,0x07,0x07,0x07,0x03,0x03,0x01,0x01,0x00,0x00,
/*--  文字:  ℃  --*/
0x00,0x02,0x05,0xE2,0x18,0x04,0x02,0x02,0x02,0x02,0x02,0x02,0x04,0x1E,0x00,0x00,
0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x40,0x40,0x40,0x40,0x40,0x20,0x18,0x00,0x00
};
//-----------------------------------------------------------------
// 函數聲明
//-----------------------------------------------------------------
void LCD_Initialize();
void Wait_LCD_Ready();
void ClearScreen();
void LCD_Write_Command(INT8U cmd);
void LCD_Write_Data(INT8U dat);
void Common_Show(INT8U P,INT8U L,INT8U W,INT8U *r);
void Display_A_Char_8X16(INT8U P,INT8U L,INT8U *M);
void Display_A_WORD(INT8U P,INT8U L,INT8U *M);
void Display_A_WORD_String(INT8U P,INT8U L,INT8U C,INT8U *M);