//-----------------------------------------------------------------
// 名稱: LCD1602液晶控制與顯示程序
//-----------------------------------------------------------------
#include <pic.h>
#include "LCD1602.h"
//-----------------------------------------------------------------
// LCD忙等待 
//-----------------------------------------------------------------
void LCD_BUSY_WAIT()
{
    INT8U status;
    TRIS_LCD_DAT  = 0xFF;                         //將端口設為輸入
     RS = 0; RW = 1;                              //讀狀態寄存器
     do 
     { 



     } while (status & 0x80);                     //忙則繼續等待
}

//-----------------------------------------------------------------
// 寫LCD命令
//-----------------------------------------------------------------
void Write_LCD_Command(INT8U cmd)
{                               




     LCD_BUSY_WAIT();                             //LCD忙等待
}

//-----------------------------------------------------------------
// 寫LCD數據寄存器
//-----------------------------------------------------------------
void Write_LCD_Data(INT8U dat)
{     




     LCD_BUSY_WAIT();                             //LCD忙等待
}

//-----------------------------------------------------------------
// LCD初始化
//-----------------------------------------------------------------
void LCD_Initialize()
{
    Write_LCD_Command(0x38); __delay_ms(2);      //置功能,8位,雙行,5*7
    Write_LCD_Command(0x01); __delay_ms(2);      //清屏
    Write_LCD_Command(0x06); __delay_ms(2);      //字符進入模式:屏幕不動,字符后移
    Write_LCD_Command(0x0C); __delay_ms(2);      //顯示開,關光標
}

//-----------------------------------------------------------------
// 在r行(0~1) c列(0~15)顯示字符串
//-----------------------------------------------------------------
void LCD_ShowString(INT8U r, INT8U c,char *str)
{






}