#include "lpc214x.h"
#include "config.h"

void Delay(uint32 dly)
{
	uint32 i;
	for(;dly>0;dly--)
	for(i=0;i<50000;i++);
}

int main(void)
{	 uint32 ADC_Data;
//	PINSEL0=0x0F333F00;
//	PINSEL1=0x15541800;
	PINSEL1|=1<<18;        //p0.25連接到ad0.4
	AD0CR=(1<<4)|		   //選擇AD0.4
	((Fpclk/100000-1)<<8)| //CLKDIV=Fpclk/1000000-1,conver  1MHz
	(0<<16)|			   //burst=0 軟件控制轉(zhuǎn)化
	(0<<17)|			   //11clock
	(1<<21)|			   //PDN=1,正常工作模式
	(0<<22)|			   //TEST1:0 = 00 
	(1<<24)|			   //start=0 ad conversion stops
	(0<<27);			   //EDGE=0(cap/mat )
	Delay(10);
	ADC_Data=AD0DR4;
}